Search results for 'Input Shaft A7A 1%22 3%2F8 Z%3D6 %28TEETH%29 - Gear Box'

INPUT PINION SHAFT AFI IV GEAR BOX FOR SPLINED SHAFT Z12 *3242B ONLY *SPLINED. PLEASE CHECK CURRENT SHAFT BEFORE ORDERING *LEAD TIME FOR THIS PART IS 3-4 WEEKS Learn More

HD INPUT SHAFT 1" 3/4 Z=20 *shaft only Learn More

HD35 Doda Pump 1:2.73-Z c/w New 2020 Splined Shaft & Chopper System WITHOUT PRIMER • Max Output pressure – 17bar • Max Flow Rate – 350m3/hour • PTO input speed – 1000RPM • Auto priming • Oil Cooling System • 155HP+ required to operate this pump • 2020 New Chopping system and splined shaft *All values are only a guide and may vary differently in each situation *NOTE: REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

INPUT PINION SHAFT *3242 ONLY *NON - SPLINED. PLEASE CHECK CURRENT SHAFT BEFORE ORDERING Learn More

This kit contains the following parts :

• 1 x Shim 65 x 77 T.0.4 - Doda Part Number GRU241
• 1 x Shim 65x77 T.0.3 - Doda Part Number GRU242
• 1 x Shim 65x80- Doda Part Number BUL7576
• 1 x Bearing 6307- Doda Part Number CUS137
• 1 x CIR Clip - Doda Part Number BUL7313
• 1 x Oil Seal 35.80.10 - Doda Part Number GTP159
• 1 x Bearing 3208 - Doda Part Number CUS142
• 1 x Shim 45x65 - Doda Part Number BUL7567
Learn More

HD INPUT SHAFT KEY 16 X 10 X 60 *KEY ONLY Learn More

HD35 Doda Pump R.1:3,31 without primer c/w Splined Shaft & Chopper System • Max Output pressure – 17bar • Max Flow Rate – 396m3/hour • PTO input speed – 1000RPM • Auto priming • Oil Cooling System • 200HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

L27/L35 INPUT SHAFT 1" 3/8 Z=6 TEETH Learn More

LAY SHAFT AFI IV GEAR BOX *3240 ONLY Learn More

OUTPUT SHAFT Z=21 TEETH L35 1:2.38 IV 1:1.6 Learn More

Doda HD35 PTO Shaft 'Shear Bolt Protected' 1 3/4" 20 Spline - 1 3/8" 6 Spline Learn More

PEDESTAL PUMP SHAFT *KEYS NOT INCLUDED. Learn More

HD35 CROWN GEAR 1000RPM R.1:2.73 Z=52 TEETH Learn More

CROWN GEAR - AFI L35 1000RPM 1:2,38 Z = 50 (TEETH) Learn More

L35 OUTPUT SHAFT 1:3.88 RATIO 17 TEETH Learn More

HD35 OUTPUT SHAFT RATION - 1:3.05 17 TEETH *DELIVERY TIME IS 3-4 WEEKS FOR THIS PART Learn More

REVERSE BLADE SUPPORT HD35 2020 INCULDING BRONZE BUSH *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

HD35 COMPLETE GEARBOX R.1.2.73 C/W SPLINED SHAFT C/W WITH OIL PUMP IDR220SX ONLY *3-4 week delivery leadtime Learn More

HD Gear Box Oil Plug Learn More

L27 Doda Pump 1000RPM R.1:3,35 without primer • Max Output pressure – 14.5bar • Max Flow Rate – 200m3/hour • PTO input speed – 1000RPM • Auto priming • 125HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 3-4 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

AFI BLADE SPLINED AND BALANCED *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

HD35 Gear Box Rear Cover Learn More

This kit includes the following: 1 x GRU131 Crown Gear Z - 21 (Teeth) 1 x GRU133 Crown Gear Z - 42 (Teeth) 1 x GRU121 Crown Gear Z - 50 (Teeth) * LEAD TIME APPROX 2-3 WEEKS FROM ORDER Learn More

Brass Rotor For Vacuum Primer & Shaft Learn More

HD35 Doda IV Pump R.1:1,19 c/w oil cooler, without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 180HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 5-6 WEEKS Learn More

L27 OUTPUT SHAFT 1:3.35 Z=19 Learn More

CROWN GEAR - AFI L27 1000RPM 1:3,35 Z = 64 (TEETH) Learn More

SPLINED HYDRAULIC HUB Z=12 CONICAL SHAFT FOR HD HYDRAULIC PUMP Learn More

IV OUTPUT PINION SHAFT R.1:1.19 - Z=21 TEETH *SHAFT GRU112M ONLY Learn More

L27 OUTPUT SHAFT 540 1:4.93 Z=14 TEETH Learn More

Doda L27/35 PTO Shaft - T 'Shear Bolt Protected' 1 3/8" 6 Spline x 1 3/8" 6 Spline Learn More

SELF LOCKING IMPELLER NUT HD35 2020 *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

HD OUTPUT SHAFT COVER *bolts etc not included Learn More

HD35 1:3.31 SPLINED OUTPUT SHAFT Z=16 TEETH *NEW SPLINED SHAFT 1:3.31 Learn More

HD35 CROWN GEAR 824RPM R.1:3.31 Z=53 TEETH Learn More

This kit contains the following parts :

• 1 x Oil Seal 50.72.10- Doda Part Number GTP139
• 1 x Taper Roller Bearing 31310 - Doda Part Number CUS118
• 1 x Shim 95x110MM - Doda Part Number BUL7593
• 1 x Bearing 3307- Doda Part Number CUS175
• 1 x Shim 65x77 T.04MM - Doda Part Number GRU241
• 1 x Shim 65x77 T.03MM - Doda Part Number GRU242

Learn More

BRONZE BUSH AFI HD35 2020 *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

This kit contains the following parts :

• 1 x Oil Seal  - Doda Part Number GTP257
• 1 x Bearing  - Doda Part Number CUS170
• 1 x Bearing  - Doda Part Number CUS162
• 1 x SHIMS 70 X 85 - 0.3/0.4/0.5; - Doda Part Number BUL7573
• 1 x Cir Clip - Doda Part Number BUL7316
• 1 x Oil Seal  - Doda Part Number GTP247

Learn More

HD Output Shaft Key Learn More

This kit includes the following: 1 x GRU130 Crown Gear Z - 29 (TEETH) 1 x GRU132 Crown Gear Z - 43 (TEETH) 1 x GRU121 Crown Gear Z - 50 (TEETH) Learn More

REVERSE BLADE SUPPORT INCLUDES BRONZE BUSH *NUTS, BOLTS AND WASHERS NOT INCLUDED *FOR NON SPLINED SHAFT Learn More

HD35 Doda IV Pump R.1:1,6 without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 230HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

HD35 2020 PINION SPLINED SHAFT 1000RPM 1:2.73 Z=19 TEETH Learn More

HD35 1:2.73 2020 SPLINED PARTS KIT THIS KIT CONTAINS: 1 X PINION SPLINED SHAFT 1000RPM 1:2.73 Z=19 TEETH - GRU195Z 1 X SELF LOCKING IMPELLER NUT - BUL7000 1 X AFI BLADE SPLINED AND BALANCED - 0608016 1 X REVERSE BLADE SUPPORT C/W BRONZE BUSH - 0608019 2 x AFI REVERSE BLADE - 1502 Learn More

L35 Doda Pump 1000RPM R.1:2,38 without primer • Max Output pressure – 12bar • Max Flow Rate – 255m3/hour • PTO input speed – 1000RPM • Auto priming • 130HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 2-3 WEEKS Learn More

NEW HIGH THICKNESS, HARD WEARING AFI HD35 & L35 PUMP BODY HOUSING WIDIA Learn More

PULLEY 132 1/A FOR: - 24/5 IV PUMP - L35 IV PUMP *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn More

L27/L35 RUBBER CONE GASKET SEAL *SEAL ONLY Learn More

This kit contains the following parts :

• 1 x Cover for A7D Gearbox - Doda Part Number GRU176
• 8 x VSP Bolt M8x20 - Doda Part Number BUL5601
• 8 x M8 Washer - Doda Part Number BUL8201
• 1 x Plug Drain - Doda Part Number RAC100
GTP141 is no longer provided. Please use silicon gel instead

Learn More

HD35 GEARBOX SUPPORT Learn More

This  item contains the following part :

• 1 x AFI HD35 & Reverse Impeller  - Doda Part Number 3002

Learn More

L27 WELD ON FLANGE OUTLET Learn More

4" Rubber O-Ring Learn More

AFI SUCTION CONE VALVE ASSEMBLY CAT FLAP *GTP135 - NOT INCLUDED Learn More

This kit contains the following parts:

• 2 x AFI Reverse Blade - Doda Part Number 1502
• 4 x M10 Self Locking Nut - Doda Part Number BUL5151
• 8 x Washer M10 - Doda Part Number BUL5952
• 4 x Bolt M10x30 - Doda Part Number BUL5163

Learn More

COMPLETE GEARBOX ONLY L27 R.1:3,35 (E2011) *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn More

This suits both 1:1,19 and 1:1,6 gearbox ratios This kit includes: 1 x 31310 Taper Koyo Bearing - CUS118 3 x Bearing 33208/Q - CUS119 1 x Bearing 32307J2 - CUS120 1 x Bearing 33109/Q - CUS121 1 x Oil Seal 50.72.10 - GTP139 1 x Oil Seal 45.60.7- GTP140 Learn More

HYDRAULIC 90° CONNECTION M1/8" RAC211 Learn More

AFI HD35 GLV CONE COVER *SEAL NOT INCLUDED Learn More

HERTELL COMPLETE PRIMER B800 - Hydraulic motor - Oil feed droppers * Note - Hydraulic motor hoses and oil bottles not included Learn More

This item contains the following part :

• 1 x AFI L27 Impeller - Doda Part Number 2978

 

Learn More

AFI HD35 Cone Seal 3MM Learn More

VANE FOR DODA PRIMER 4 REQUIRED ON EACH PRIMER Approximate dimensions: L - 72mm W - 43mm H - 5mm Learn More

OIL VENT CAP 3/4" Learn More

CLEAR FLEXIBLE PVC TUBING 30M COIL PSC1110250 OIL DROPPER HOSE Learn More

This kit contains the following parts:

• 1 x Oil Seal - Doda Part Number GTP217
• 1 x Bearing - Doda Part Number CUS201
• 1 x AFI GEARBOX SHIMS DIA. 85 X 100 (0.3/0.4/0.5) BUL7574
• 1 x Bearing - Doda Part Number CUS163

Learn More

AFI L27-L35 Gearbox Housing Learn More

HYDRAULIC PUMP RIGHT CC4.2 FOR IV TYPE COOLING SYSTEM POLARIS HYDRAULIC PUMP FOR OIL COOLING - HD35 IV ONLY Learn More

HD35 GEARBOX HOUSING (E4241) *3-4 week delivery leadtime Learn More

DODA PUMP FRAME COMPLETE WITH LEGS AND PINS BRACKET REQUIRED FOR FITTING L27/L35 PUMP MODELS Learn More

This item contains the following part :

• 1 x L27 Convoyer Housing - Doda Part Number 2976

 

 

Learn More

O Ring AFI L35/HD35 Learn More

HERTELL PRIMER VANE B400 4 REQUIRED ON EACH PRIMER Approximate dimensions: L - 100mm W - 42mm H - 7.5mm 01BO004015 Learn More

Lasts on average 5 times longer than standard impeller
Blue Hardened High Abrasion Resistant Doda AFI HD35 & L35 Impeller Hard Wearing Impeller For Sand Pumping And High Abrasion Applications

Learn More

VACUUM PRIMER OIL RESERVOIR Learn More

This kit contains the following parts :

• 1 x 4" Rubber O-Ring - Doda Part Number GTP213
• 1 x Bauer Cone for Afi Pumps; Doda Part Number 3182
• 1 x 6" Rubber O-Ring - Doda Part Number GTP214

*note - bauer cone not complete with clamps Learn More

This kit includes the following items: Blind Cap 72 x 10 - GTP240 Oil Seal 35.80.10 - GTP159 Oil Seal 50.72.10 - GTP139 Learn More

BELT A37-1/2 FOR VACUUM PRIMER FOR IV PUMP PULLY BELT Learn More

VACUUM PRIMER RESERVOIR GALVANISED Learn More

This item contains the following part :

• 1 x AFI HD35 & L35 Impeller - Doda Part Number 3003

Learn More

AFI Blade *NON SPLINED BLADE Learn More

This kit contains the following parts :

• 1 x Oil Plug 3/8" - Doda Part Number GRU127
• 1 x Oil Plug Gasket Seal - Doda Part Number GTP246

Learn More

Hertell Heavy duty high capacity primer pump. - Hydraulic motor - Oil feed droppers - 1" hose connectors * Note - Hydraulic motor hoses and oil bottles not included Learn More

This item contains the following part:

• 1 x AFI HD35 & L35 Convoyer Housing - Doda Part Number 3001

Learn More