Search results for 'Input Shaft A7A 1%22 3%2F8 Z%3D6 %28TEETH%29 - Gear Box'

INPUT PINION SHAFT AFI IV GEAR BOX FOR SPLINED SHAFT Z12 *3242B ONLY *SPLINED. PLEASE CHECK CURRENT SHAFT BEFORE ORDERING *LEAD TIME FOR THIS PART IS 3-4 WEEKS Learn More

HD35 Doda Pump 1:2.73-Z c/w New 2020 Splined Shaft & Chopper System WITHOUT PRIMER • Max Output pressure – 17bar • Max Flow Rate – 350m3/hour • PTO input speed – 1000RPM • Auto priming • Oil Cooling System • 155HP+ required to operate this pump • 2020 New Chopping system and splined shaft *All values are only a guide and may vary differently in each situation *NOTE: REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

L27/L35 INPUT SHAFT 1" 3/8 Z=6 TEETH Learn More

HD35 Doda Pump R.1:3,31 without primer c/w Splined Shaft & Chopper System • Max Output pressure – 17bar • Max Flow Rate – 396m3/hour • PTO input speed – 1000RPM • Auto priming • Oil Cooling System • 200HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

MEC 5000 GEAR C/W SHAFT 55T POS 10 AM26BP Learn More

This kit contains the following parts :

• 1 x Shim 65 x 77 T.0.4 - Doda Part Number GRU241
• 1 x Shim 65x77 T.0.3 - Doda Part Number GRU242
• 1 x Shim 65x80- Doda Part Number BUL7576
• 1 x Bearing 6307- Doda Part Number CUS137
• 1 x CIR Clip - Doda Part Number BUL7313
• 1 x Oil Seal 35.80.10 - Doda Part Number GTP159
• 1 x Bearing 3208 - Doda Part Number CUS142
• 1 x Shim 45x65 - Doda Part Number BUL7567
Learn More

MEC 65/8000 GEAR C/W SHAFT 53T POS 10 Learn More

MEC 1000RPM GEAR C/ SHAFT 43 TEETH POS 9 TO SUIT 9000L, 11,000L AND 13,500L M SERIES PUMP 4020507012BP Learn More

INPUT PINION SHAFT *3242 ONLY *NON - SPLINED. PLEASE CHECK CURRENT SHAFT BEFORE ORDERING Learn More

LAY SHAFT AFI IV GEAR BOX *3240 ONLY Learn More

HD INPUT SHAFT KEY 16 X 10 X 60 *KEY ONLY Learn More

HD INPUT SHAFT 1" 3/4 Z=20 *shaft only Learn More

HD35 Doda IV Pump R.1:1,6 without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 230HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

L35 Doda Pump 1000RPM R.1:2,38 without primer • Max Output pressure – 12bar • Max Flow Rate – 255m3/hour • PTO input speed – 1000RPM • Auto priming • 130HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 2-3 WEEKS Learn More

L27 Doda Pump 1000RPM R.1:3,35 without primer • Max Output pressure – 14.5bar • Max Flow Rate – 200m3/hour • PTO input speed – 1000RPM • Auto priming • 125HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 3-4 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

JUROP PN155 M 1000RPM GEAR Z41 165109KGB0 Learn More

HD35 Doda IV Pump R.1:1,19 c/w oil cooler, without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 180HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 5-6 WEEKS Learn More

This kit includes the following: 1 x GRU130 Crown Gear Z - 29 (TEETH) 1 x GRU132 Crown Gear Z - 43 (TEETH) 1 x GRU121 Crown Gear Z - 50 (TEETH) Learn More

This kit includes the following: 1 x GRU131 Crown Gear Z - 21 (Teeth) 1 x GRU133 Crown Gear Z - 42 (Teeth) 1 x GRU121 Crown Gear Z - 50 (Teeth) * LEAD TIME APPROX 2-3 WEEKS FROM ORDER Learn More

HD35 2020 PINION SPLINED SHAFT 1000RPM 1:2.73 Z=19 TEETH Learn More

AFI BLADE SPLINED AND BALANCED *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

BRONZE BUSH AFI HD35 2020 *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

SELF LOCKING IMPELLER NUT HD35 2020 *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

Doda HD35 PTO Shaft 'Shear Bolt Protected' 1 3/4" 20 Spline - 1 3/8" 6 Spline Learn More

Doda L27/35 PTO Shaft - T 'Shear Bolt Protected' 1 3/8" 6 Spline x 1 3/8" 6 Spline Learn More

JUROP OIL FLANGE PN140/LC420 1610512900 PN130 M PN140 M PN155 M PN155R M PN 130 D – Splined shaft PN 140 D – Splined shaft PN 155 D – Splined shaft Learn More

Tanker Wide Angle PTO Shaft 1400mm 1" 3/8 Z6 to 1" 3/8 Z6 Learn More

DRIVE GEAR Z48 PN45-58-84-106M 1651000000 Learn More

IV OUTPUT PINION SHAFT R.1:1.19 - Z=21 TEETH *SHAFT GRU112M ONLY Learn More

JUROP PN106 PUMP DIRECT DRIVE SPLINED SHAFT 1300RPM 11000L *VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED *NO GEARBOX *PLEASE CONTACT US TO ENQUIRE AVAILABILITY ON THIS PUMP LEAD TIME WILL THEN BE GIVEN Learn More

JUROP PN140 PUMP DIRECT DRIVE SPLINED SHAFT 14000L *VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED *NO GEARBOX *PLEASE CONTACT US TO ENQUIRE AVAILABILITY ON THIS PUMP LEAD TIME WILL THEN BE GIVEN Learn More

BATTIONI MEC GEAR 23 TEETH TO SUIT 6500 & 8000L M SERIES PUMP POS 19 AMEC33BP Learn More

MEC 5000 GEAR 21 TEETH POS 19 AM33BP Learn More

REVERSE BLADE SUPPORT INCLUDES BRONZE BUSH *NUTS, BOLTS AND WASHERS NOT INCLUDED *FOR NON SPLINED SHAFT Learn More

HD35 COMPLETE GEARBOX R.1.2.73 C/W SPLINED SHAFT C/W WITH OIL PUMP IDR220SX ONLY *3-4 week delivery leadtime Learn More

HD35 1:3.31 SPLINED OUTPUT SHAFT Z=16 TEETH *NEW SPLINED SHAFT 1:3.31 Learn More

PEDESTAL PUMP SHAFT *KEYS NOT INCLUDED. Learn More

REVERSE BLADE SUPPORT HD35 2020 INCULDING BRONZE BUSH *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

BATTIONI MEC 1000RPM GEAR 33T POS 22 Learn More

BATTIONI GARDA PTO SPLINED SHAFT G26BP *LEADTIME IS APPROX. 8 WEEKS Learn More

GEAR Z 28 PN130M PN140M 1651005500 Learn More

JUROP GEAR Z 70 540RPM PN130M AND PN140M - POS 21 1651010500 Learn More

PINION GEAR Z19 PN45-58-84-106 M 1651000100 Learn More

HD OUTPUT SHAFT COVER *bolts etc not included Learn More

JUROP PN155R M -1000RPM - 15500L AIR INJECTION SH. CCW W/O MAN SPLINED SHAFT CCW ROTATION C/W GEARBOX Learn More

HD Gear Box Oil Plug Learn More

JUROP PN155R DIRECT DRIVE AIR INJECTION SPLINED SHAFT CCW ROTATION MANUAL 4-WAY VALVE *NO GEARBOX Learn More

This kit contains the following parts :

• 1 x Oil Seal  - Doda Part Number GTP257
• 1 x Bearing  - Doda Part Number CUS170
• 1 x Bearing  - Doda Part Number CUS162
• 1 x SHIMS 70 X 85 - 0.3/0.4/0.5; - Doda Part Number BUL7573
• 1 x Cir Clip - Doda Part Number BUL7316
• 1 x Oil Seal  - Doda Part Number GTP247

Learn More

L27 OUTPUT SHAFT 1:3.35 Z=19 Learn More

OUTPUT SHAFT Z=21 TEETH L35 1:2.38 IV 1:1.6 Learn More

L27 OUTPUT SHAFT 540 1:4.93 Z=14 TEETH Learn More

L35 OUTPUT SHAFT 1:3.88 RATIO 17 TEETH Learn More

SPLINED HYDRAULIC HUB Z=12 CONICAL SHAFT FOR HD HYDRAULIC PUMP Learn More

HD35 CROWN GEAR 824RPM R.1:3.31 Z=53 TEETH Learn More

HD35 CROWN GEAR 1000RPM R.1:2.73 Z=52 TEETH Learn More

KEY C45K 8X7X30 UNI6604 NEEDED FOR GRU112- REPLACES BUL6067 FOR THIS SHAFT Learn More

DANFOSS OMS 400 HYDRAULIC MOTOR C/W PRESET RELIEF VALVE 32MM SHAFT 10MM KEY WAY SUITABLE FOR HOSE REELERS Learn More

Flowmeter c/w DD Slurry Monitor (Kit includes flow meter, in cab display, wiring harness & speed input lead)

• Comes with compact in cab hand set display
• Speed input lead for forward ground speed from the tractors CANBUS (dash)
• Compatible with Umbilical Systems & Tankers
• Live application rate
• Total volume recorded
• Indicates the correct driving speed to achieve application rates
• RTK data
• Jobs saved
• Individual fields saved
• USB port for downloading data
• Clean waterproof display that can be wiped clean
• Units in UK Gallons or Cubic Meters
• Can be used with GPS speed sensor

Learn More

CROWN GEAR - AFI L35 1000RPM 1:2,38 Z = 50 (TEETH) Learn More

DANFOSS OMR 315 HYDRUALIC MOTOR SUITABLE FOR HOSE REELERS 25MM SHAFT 8MM KEY WAY Learn More

HD35 OUTPUT SHAFT RATION - 1:3.05 17 TEETH *DELIVERY TIME IS 3-4 WEEKS FOR THIS PART Learn More

This kit contains the following parts :

• 1 x Oil Seal 50.72.10- Doda Part Number GTP139
• 1 x Taper Roller Bearing 31310 - Doda Part Number CUS118
• 1 x Shim 95x110MM - Doda Part Number BUL7593
• 1 x Bearing 3307- Doda Part Number CUS175
• 1 x Shim 65x77 T.04MM - Doda Part Number GRU241
• 1 x Shim 65x77 T.03MM - Doda Part Number GRU242

Learn More

HD Output Shaft Key Learn More

Flowmeter c/w DD Slurry Monitor (Kit includes flow meter, in cab display, wiring harness & speed input lead)

• Comes with compact in cab hand set display
• Speed input lead for forward ground speed from the tractors CANBUS (dash)
• Compatible with Umbilical Systems & Tankers
• Live application rate
• Total volume recorded
• Indicates the correct driving speed to achieve application rates
• RTK data
• Jobs saved
• Individual fields saved
• USB port for downloading data
• Clean waterproof display that can be wiped clean
• Units in UK Gallons or Cubic Meters
• Can be used with GPS speed sensor

Learn More

HD35 Gear Box Rear Cover Learn More

Flowmeter c/w DD Slurry Monitor (Kit includes flow meter, in cab display, wiring harness & speed input lead)

• Comes with compact in cab hand set display
• Speed input lead for forward ground speed from the tractors CANBUS (dash)
• Compatible with Umbilical Systems & Tankers
• Live application rate
• Total volume recorded
• Indicates the correct driving speed to achieve application rates
• RTK data
• Jobs saved
• Individual fields saved
• USB port for downloading data
• Clean waterproof display that can be wiped clean
• Units in UK Gallons or Cubic Meters
• Can be used with GPS speed sensor

Learn More

Brass Rotor For Vacuum Primer & Shaft Learn More

Flowmeter c/w DD Slurry Monitor (Kit includes flow meter, in cab display, wiring harness & speed input lead)

• Comes with compact in cab hand set display
• Speed input lead for forward ground speed from the tractors CANBUS (dash)
• Compatible with Umbilical Systems & Tankers
• Live application rate
• Total volume recorded
• Indicates the correct driving speed to achieve application rates
• RTK data
• Jobs saved
• Individual fields saved
• USB port for downloading data
• Clean waterproof display that can be wiped clean
• Units in UK Gallons or Cubic Meters
• Can be used with GPS speed sensor

Learn More

HD35 1:2.73 2020 SPLINED PARTS KIT THIS KIT CONTAINS: 1 X PINION SPLINED SHAFT 1000RPM 1:2.73 Z=19 TEETH - GRU195Z 1 X SELF LOCKING IMPELLER NUT - BUL7000 1 X AFI BLADE SPLINED AND BALANCED - 0608016 1 X REVERSE BLADE SUPPORT C/W BRONZE BUSH - 0608019 2 x AFI REVERSE BLADE - 1502 Learn More

CROWN GEAR - AFI L27 1000RPM 1:3,35 Z = 64 (TEETH) Learn More

131-139 SUPER CLAMP *picture for illustration purposes only Learn More

8" GLADIO O-RING GASKET FOR FLANGE RIV 9859 Learn More

6" GLADIO SEAT GASKET RIV 9847 FITS NEW TYPE AND OLD TYPE GLADIO Learn More

4" GLADIO SCREWED LOCKING RING - NEW SERIES RIV 9848 Learn More

113-121MM SUPER CLAMP *picture for illustration purposes only Learn More

ALRENA BRONZE BEARING * 12 REQUIRED PER MACERATOR Learn More

ALRENA SPIRAL SPRING * 6 REQUIRED PER MACERATOR 95653 Learn More

86-91 SUPER CLAMP *picture for illustration purposes only Learn More

214-226 SUPER CLAMP Learn More

ALRENA SEAL 110X130X12 * 1 REQUIRED PER MACERATOR Learn More

6" GLADIO O-RING GASKET FOR FLANGE RIV 9859 Learn More

ALRENA GASKET V42 * 1 REQUIRED PER MACERATOR Learn More

ALRENA GASKET V30 * 1 REQUIRED PER MACERATOR Learn More

ALRENA GASKET V36/V48 * 1 REQUIRED PER MACERATOR Learn More