Doda Pumps

Sealing Ring for Widia Holder Learn More

AFI L27 Pump Body Housing Widia Learn More

AFI IV GEARBOX COVER - 3 INLET SIDE Learn More

L35 OUTPUT SHAFT 1:3.88 RATIO 17 TEETH Learn More

This kit includes the following: 1 x GRU131 Crown Gear Z - 21 (Teeth) 1 x GRU133 Crown Gear Z - 42 (Teeth) 1 x GRU121 Crown Gear Z - 50 (Teeth) * LEAD TIME APPROX 2-3 WEEKS FROM ORDER Learn More

L27 WELD ON FLANGE OUTLET Learn More

INPUT PINION SHAFT AFI IV GEAR BOX FOR SPLINED SHAFT Z12 *3242B ONLY *SPLINED. PLEASE CHECK CURRENT SHAFT BEFORE ORDERING *LEAD TIME FOR THIS PART IS 3-4 WEEKS Learn More

This item contains the following part:

• 1 x AFI HD35 & L35 Convoyer Housing - Doda Part Number 3001

Learn More

AFI L27-L35 Gearbox Housing Learn More

HD35 Doda Pump R.1:3,31 without primer c/w Splined Shaft & Chopper System • Max Output pressure – 17bar • Max Flow Rate – 396m3/hour • PTO input speed – 1000RPM • Auto priming • Oil Cooling System • 200HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

ADAPTER FEMALE 3/4" TO MALE 1/2" Learn More

This item contains the following part :

• 1 x AFI L27 Reverse Impeller - Doda Part Number 2977

 

Learn More

CROWN GEAR - AFI L35 1000RPM 1:2,38 Z = 50 (TEETH) Learn More

L27 Doda Pump 1000RPM R.1:3,35 without primer • Max Output pressure – 14.5bar • Max Flow Rate – 200m3/hour • PTO input speed – 1000RPM • Auto priming • 125HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 3-4 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

This kit contains the following parts :

• 1 x Cover for A7D Gearbox - Doda Part Number GRU176
• 8 x VSP Bolt M8x20 - Doda Part Number BUL5601
• 8 x M8 Washer - Doda Part Number BUL8201
• 1 x Plug Drain - Doda Part Number RAC100
GTP141 is no longer provided. Please use silicon gel instead

Learn More

Brass Rotor For Vacuum Primer & Shaft Learn More

NEW HIGH THICKNESS, HARD WEARING AFI HD35 & L35 PUMP BODY HOUSING WIDIA Learn More

HD Gear Box Oil Plug Learn More

Bearing 6003 Learn More

REVERSE BLADE SUPPORT HD35 2020 INCULDING BRONZE BUSH *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

LAY SHAFT AFI IV GEAR BOX *3240 ONLY Learn More

Bronze Bush Learn More

TOP HAT BAUER (PRIMING CAP) CLAMP INCLUDED *TOP HAT CLAMP MAY VARY Learn More

HD35 1:2.73 2020 SPLINED PARTS KIT THIS KIT CONTAINS: 1 X PINION SPLINED SHAFT 1000RPM 1:2.73 Z=19 TEETH - GRU195Z 1 X SELF LOCKING IMPELLER NUT - BUL7000 1 X AFI BLADE SPLINED AND BALANCED - 0608016 1 X REVERSE BLADE SUPPORT C/W BRONZE BUSH - 0608019 2 x AFI REVERSE BLADE - 1502 Learn More

O Ring AFI L27 Learn More

Oil Filter Assembly for HD Pumps Learn More

This kit contains the following parts:

• 1 x Oil Seal - Doda Part Number GTP217
• 1 x Bearing - Doda Part Number CUS201
• 1 x AFI GEARBOX SHIMS DIA. 85 X 100 (0.3/0.4/0.5) BUL7574
• 1 x Bearing - Doda Part Number CUS163

Learn More

L27 OUTPUT SHAFT 1:3.35 Z=19 Learn More

This kit includes the following: 1 x O Ring PD version - GTP131 1 x Oil Seal Holder PD Impeller Side - 3026 2 x Oil Seal 45.60.10 - GTP130 1 x BEARING SKF 31309 J2/QCL7C (30309DJ) - CUS114 1 x Bearing 6209 - CUS115 1 x Shim 65 x 85 - BUL7557 Learn More

BLUE HARDENED HIGH ABRASION RESISTANT DODA AFI HD35 & L35 IMPELLER HARD WEARING IMPELLER FOR SAND PUMPING AND HIGH ABRASION APPLICATIONS Learn More

This item contains the following part :

• 1 x AFI HD Cone Body - Doda Part Number 4235

Learn More

L27/L35 INPUT SHAFT 1" 3/8 Z=6 TEETH Learn More

HD35 Doda IV Pump R.1:1,19 c/w oil cooler, without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 180HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 5-6 WEEKS Learn More

AFI SUCTION CONE VALVE ASSEMBLY CAT FLAP *GTP135 - NOT INCLUDED Learn More

This kit contains the following parts :

• 1 x Shim 65 x 77 T.0.4 - Doda Part Number GRU241
• 1 x Shim 65x77 T.0.3 - Doda Part Number GRU242
• 1 x Shim 65x80- Doda Part Number BUL7576
• 1 x Bearing 6307- Doda Part Number CUS137
• 1 x CIR Clip - Doda Part Number BUL7313
• 1 x Oil Seal 35.80.10 - Doda Part Number GTP159
• 1 x Bearing 3208 - Doda Part Number CUS142
• 1 x Shim 45x65 - Doda Part Number BUL7567
Learn More

Bearing 6205 Learn More

Afi L35 Pump Body c/w Garda Evo13500L Complete with Widia Seal and Blade No Suction Cone GARDA EVO Learn More

HD GEARBOX BOTTOM COVER (E4241) *COVER ONLY Learn More

HD35 Gear Box Rear Cover Learn More

VANE FOR DODA PRIMER 4 REQUIRED ON EACH PRIMER Approximate dimensions: L - 72mm W - 43mm H - 5mm Learn More

AFI BLADE SPLINED AND BALANCED *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

Bolt M1/2" Learn More

Unidirectional Oil Flow Valve * LEAD TIME = 3-4 WEEKS ON THIS PRODUCT Learn More

AFI HD35 Cone Seal 3MM Learn More

BOLT M1/8" ART.290 (E4241) Learn More

TOP HAT BAUER E2029003 VERSION Learn More

This kit includes the following: 1 x GRU130 Crown Gear Z - 29 (TEETH) 1 x GRU132 Crown Gear Z - 43 (TEETH) 1 x GRU121 Crown Gear Z - 50 (TEETH) Learn More

SPLINED HYDRAULIC HUB Z=12 CONICAL SHAFT FOR HD HYDRAULIC PUMP Learn More

This  item contains the following part :

• 1 x AFI HD35 & Reverse Impeller  - Doda Part Number 3002

Learn More

COMPLETE GEARBOX ONLY - L35 R.1:2.38 1000 RPM *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn More

L35 Doda Pump 1000RPM R.1:2,38 without primer • Max Output pressure – 12bar • Max Flow Rate – 255m3/hour • PTO input speed – 1000RPM • Auto priming • 130HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 2-3 WEEKS Learn More

OIL VENT CAP 3/4" Learn More

This item contains the following part :

• 1 x AFI L27 Impeller - Doda Part Number 2978

 

Learn More

CROWN GEAR - AFI L27 1000RPM 1:3,35 Z = 64 (TEETH) Learn More

HD35 Complete Gearbox only R.1:3,31 Complete with oil pump IDR220SX only *3-4 week delivery leadtime Learn More

HD INPUT SHAFT 1" 3/4 Z=20 *shaft only Learn More

This kit contains the following parts :

• 1 x 4" Rubber O-Ring - Doda Part Number GTP213
• 1 x Bauer Cone for Afi Pumps; Doda Part Number 3182
• 1 x 6" Rubber O-Ring - Doda Part Number GTP214

*note - bauer cone not complete with clamps Learn More

Dowell Learn More

OIL SEAL HOLDER PD SUPPORT MOTOR SIDE Learn More

HD35 CROWN GEAR 824RPM R.1:3.31 Z=53 TEETH Learn More

Brass Hose Barb 3/4" x 25mm Learn More

DODA AFI HD35 & L35 PUMP BODY HOUSING WIDIA BLUE HARDENED HIGH ABRASION RESISTANT HARD WEARING PUMP BODY FOR SAND PUMPING AND HIGH ABRASION APPLICATIONS Learn More

INPUT PINION SHAFT *3242 ONLY *NON - SPLINED. PLEASE CHECK CURRENT SHAFT BEFORE ORDERING Learn More

O Ring AFI L35/HD35 Learn More

HD35 OUTPUT SHAFT RATION - 1:3.05 17 TEETH *DELIVERY TIME IS 3-4 WEEKS FOR THIS PART Learn More

HYDRAULIC PUMP RIGHT CC4.2 FOR IV TYPE COOLING SYSTEM POLARIS HYDRAULIC PUMP FOR OIL COOLING - HD35 IV ONLY Learn More

Splash Guard Learn More

This kit includes: 1 x Oil Pump for HD pumps - IDR220SX 2 x Female 3/8" flange - IDR269 Learn More

HD35/L35 WELD ON FLANGE OUTLET Learn More

This kit contains the following parts :

• 1 x Oil Seal  - Doda Part Number GTP257
• 1 x Bearing  - Doda Part Number CUS170
• 1 x Bearing  - Doda Part Number CUS162
• 1 x SHIMS 70 X 85 - 0.3/0.4/0.5; - Doda Part Number BUL7573
• 1 x Cir Clip - Doda Part Number BUL7316
• 1 x Oil Seal  - Doda Part Number GTP247

Learn More

Rear Cover AFI L27-L35 Gearbox Learn More

HD35 Doda Pump 1:2.73-Z c/w New 2020 Splined Shaft & Chopper System WITHOUT PRIMER • Max Output pressure – 17bar • Max Flow Rate – 350m3/hour • PTO input speed – 1000RPM • Auto priming • Oil Cooling System • 155HP+ required to operate this pump • 2020 New Chopping system and splined shaft *All values are only a guide and may vary differently in each situation *NOTE: REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

This item contains the following part :

• 1 x L27 Convoyer Housing - Doda Part Number 2976

 

 

Learn More

Key 10 x 8 x 45 Learn More

HD35 Doda IV Pump R.1:1,6 without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 230HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

VALVE DODA PUMP Learn More

This kit contains the following parts :

• 1 x Oil Plug 3/8" - Doda Part Number GRU127
• 1 x Oil Plug Gasket Seal - Doda Part Number GTP246

Learn More

Key 6 x 6 x 25 Learn More

Rubber Gasket Afi Outlet 190 x 120 Learn More

BOLT M1/2" X 10 (E4241) *BOLT ONLY Learn More

HD Output Shaft Key Learn More

Galvanised 90 Degree Elbow M/F 3/4" Learn More

BRONZE BUSH AFI HD35 2020 *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

AFI Blade *NON SPLINED BLADE Learn More