Search results for 'Doda seal'

This kit contains the following parts:

• 2 x AFI Reverse Blade - Doda Part Number 1502
• 4 x M10 Self Locking Nut - Doda Part Number BUL5151
• 8 x Washer M10 - Doda Part Number BUL5952
• 4 x Bolt M10x30 - Doda Part Number BUL5163

Learn More

AFI HD35 Cone Liner 0606001 Learn More

O Ring AFI L27 Learn More

Splash Guard Learn More

L35 OUTPUT SHAFT 1:3.88 RATIO 17 TEETH Learn More

L27 OUTPUT SHAFT 540 1:4.93 Z=14 TEETH Learn More

OUTPUT SHAFT Z=21 TEETH L35 1:2.38 IV 1:1.6 Learn More

L27 OUTPUT SHAFT 1:3.35 Z=19 Learn More

Rear Cover AFI L27-L35 Gearbox Learn More

AFI L27-L35 Gearbox Housing Learn More

COMPLETE GEARBOX ONLY - L35 R.1:2.38 1000 RPM *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn More

COMPLETE GEARBOX ONLY L27 R.1:3,35 (E2011) *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn More

L27/L35 INPUT SHAFT 1" 3/8 Z=6 TEETH Learn More

Key 10 x 8 x 45 Learn More

CROWN GEAR - AFI L35 1000RPM 1:2,38 Z = 50 (TEETH) Learn More

CROWN GEAR - AFI L27 1000RPM 1:3,35 Z = 64 (TEETH) Learn More

Vacuum Primer Body Cover - Bearing Side Learn More

Bearing 6205 Learn More

Sealing Ring for Widia Holder Learn More

O Ring AFI L35/HD35 Learn More

Bronze Bush Learn More

This item contains the following part:

• 1 x AFI HD35 & L35 Convoyer Housing - Doda Part Number 3001

Learn More

This  item contains the following part :

• 1 x AFI HD35 & Reverse Impeller  - Doda Part Number 3002

Learn More

This item contains the following part :

• 1 x AFI HD35 & L35 Impeller - Doda Part Number 3003

Learn More

This item contains the following part :

• 1 x AFI HD Cone Body - Doda Part Number 4235

Learn More

This item contains the following part :

• 1 x L27 Convoyer Housing - Doda Part Number 2976

 

 

Learn More

This item contains the following part :

• 1 x AFI L27 Reverse Impeller - Doda Part Number 2977

 

Learn More

This item contains the following part :

• 1 x AFI L27 Impeller - Doda Part Number 2978

 

Learn More

This kit contains the following parts :

• 1 x Cover for A7D Gearbox - Doda Part Number GRU176
• 8 x VSP Bolt M8x20 - Doda Part Number BUL5601
• 8 x M8 Washer - Doda Part Number BUL8201
• 1 x Plug Drain - Doda Part Number RAC100
GTP141 is no longer provided. Please use silicon gel instead

Learn More

This kit contains the following parts :

• 1 x 4" Rubber O-Ring - Doda Part Number GTP213
• 1 x Bauer Cone for Afi Pumps; Doda Part Number 3182
• 1 x 6" Rubber O-Ring - Doda Part Number GTP214

*note - bauer cone not complete with clamps Learn More

SELF LOCKING IMPELLER NUT Learn More

HD35 Gear Box Rear Cover Learn More

HD Output Shaft Key Learn More

HD Gear Box Oil Plug Learn More

HD35 CROWN GEAR 824RPM R.1:3.31 Z=53 TEETH Learn More

HD35 CROWN GEAR 1000RPM R.1:2.73 Z=52 TEETH Learn More

Bolt M1/2" Learn More

AFI Blade *NON SPLINED BLADE Learn More

Key 6 x 6 x 25 Learn More

Brass Rotor For Vacuum Primer & Shaft Learn More

Dowell Learn More

HD35 Doda Pump 1:2.73-Z c/w New 2020 Splined Shaft & Chopper System WITHOUT PRIMER • Max Output pressure – 17bar • Max Flow Rate – 350m3/hour • PTO input speed – 1000RPM • Auto priming • Oil Cooling System • 155HP+ required to operate this pump • 2020 New Chopping system and splined shaft *All values are only a guide and may vary differently in each situation *NOTE: REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

L35 Doda Pump 1000RPM R.1:2,38 without primer • Max Output pressure – 12bar • Max Flow Rate – 255m3/hour • PTO input speed – 1000RPM • Auto priming • 130HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 2-3 WEEKS Learn More

L35 Doda Pedestal Pump without primer ##EMAIL FOR LEAD TIME ## Learn More

HD35 Doda IV Pump R.1:1,19 c/w oil cooler, without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 180HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 5-6 WEEKS Learn More

HD35 Doda IV Pump R.1:1,6 without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 230HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

L27 Doda Pump 1000RPM R.1:3,35 without primer • Max Output pressure – 14.5bar • Max Flow Rate – 200m3/hour • PTO input speed – 1000RPM • Auto priming • 125HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 3-4 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

HD35 Complete Gearbox only R.1:3,31 Complete with oil pump IDR220SX only *3-4 week delivery leadtime Learn More

4" Rubber O-Ring Learn More

Rubber Gasket Afi Outlet 190 x 120 Learn More

SEAL RING 72 X 40 X 10 PN45-58-84-106M PN130-140-155M 4022200040 Learn More

NEW HIGH THICKNESS, HARD WEARING AFI HD35 & L35 PUMP BODY HOUSING WIDIA Learn More

BATTIONI MEC MECHANICAL SEAL TO SUIT GARDA 75 PUMP - GEARBOX SECTION WITH MECHANICAL SEAL (POS 27) G98BP Learn More

JUROP SEAL KIT FOR HYDRAULIC MOTOR 4022200123 Learn More

SEAL RING 41X27X10 PN 45-58-84-106-130-140-155 D PN 45-58-84-160-130-140-155 M PN140M - POS 46 4022200030 Learn More

SEAL RING 72 X 48 X 15 PN 45-58-84 D PN 45-58-84 M PN106D PN106M 4022200110 Learn More

This kit includes the following: 1 x GRU130 Crown Gear Z - 29 (TEETH) 1 x GRU132 Crown Gear Z - 43 (TEETH) 1 x GRU121 Crown Gear Z - 50 (TEETH) Learn More

This kit includes the following: 1 x GRU131 Crown Gear Z - 21 (Teeth) 1 x GRU133 Crown Gear Z - 42 (Teeth) 1 x GRU121 Crown Gear Z - 50 (Teeth) * LEAD TIME APPROX 2-3 WEEKS FROM ORDER Learn More

This kit includes: 1 x Oil Pump for HD pumps - IDR220SX 2 x Female 3/8" flange - IDR269 Learn More

Stator AFI Vacuum Pump - Cast Iron Learn More

VANE FOR DODA PRIMER 4 REQUIRED ON EACH PRIMER Approximate dimensions: L - 72mm W - 43mm H - 5mm Learn More

Galvanised 90 Degree Elbow M/F 3/4" Learn More

Bearing 6003 Learn More

Brass Hose Barb 3/4" x 25mm Learn More

Hydraulic Primer Motor Learn More

Unidirectional Oil Flow Valve * LEAD TIME = 3-4 WEEKS ON THIS PRODUCT Learn More

Spiraled Hose 25mm c/w Hose Clips Learn More

TOP HAT BAUER (PRIMING CAP) CLAMP INCLUDED *TOP HAT CLAMP MAY VARY Learn More

Oil Filter Assembly for HD Pumps Learn More

HD35 Doda Pump R.1:3,31 without primer c/w Splined Shaft & Chopper System • Max Output pressure – 17bar • Max Flow Rate – 396m3/hour • PTO input speed – 1000RPM • Auto priming • Oil Cooling System • 200HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

BOLT M1/8" ART.290 (E4241) Learn More

Doda HD35 PTO Shaft 'Shear Bolt Protected' 1 3/4" 20 Spline - 1 3/8" 6 Spline Learn More

Doda L27/35 PTO Shaft - T 'Shear Bolt Protected' 1 3/8" 6 Spline x 1 3/8" 6 Spline Learn More

AFI L27 Pump Body Housing Widia Learn More

HD35 OUTPUT SHAFT RATION - 1:3.05 17 TEETH *DELIVERY TIME IS 3-4 WEEKS FOR THIS PART Learn More

BATTIONI MEC 13500 REBUILD KIT - RED LINE 601020108BP KIT CONTAINS: VANES SEALS O-RINGS BOLTS AND WASHERS Learn More

BATTIONI MEC 11000 REBUILD KIT - RED LINE 6010201081BP KIT CONTAINS: VANES SEALS O-RINGS BOLTS AND WASHERS Learn More

BATTIONI MEC 9000 REBUILD KIT - RED LINE 6010201080BP KIT CONTAINS: VANES SEALS O-RINGS BOLTS AND WASHERS Learn More