Search results for 'Input Shaft A7A 1%22 3%2F8 Z%3D6 %28TEETH%29 - Gear Box'

INPUT PINION SHAFT AFI IV GEAR BOX FOR SPLINED SHAFT Z12 *3242B ONLY *SPLINED. PLEASE CHECK CURRENT SHAFT BEFORE ORDERING *LEAD TIME FOR THIS PART IS 3-4 WEEKS Learn More

INPUT PINION SHAFT *3242 ONLY *NON - SPLINED. PLEASE CHECK CURRENT SHAFT BEFORE ORDERING Learn More

MEC 65/8000 GEAR C/W SHAFT 53T POS 10 Learn More

HD35 Doda Pump 1:2.73-Z c/w New 2020 Splined Shaft & Chopper System WITHOUT PRIMER • Max Output pressure – 17bar • Max Flow Rate – 350m3/hour • PTO input speed – 1000RPM • Auto priming • Oil Cooling System • 155HP+ required to operate this pump • 2020 New Chopping system and splined shaft *All values are only a guide and may vary differently in each situation *NOTE: REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

L27/L35 INPUT SHAFT 1" 3/8 Z=6 TEETH Learn More

HD INPUT SHAFT KEY 16 X 10 X 60 *KEY ONLY Learn More

MEC 1000RPM GEAR C/W SHAFT 33T POS 22 Learn More

LAY SHAFT AFI IV GEAR BOX *3240 ONLY Learn More

HD35 Doda Pump R.1:3,31 without primer c/w Splined Shaft & Chopper System • Max Output pressure – 17bar • Max Flow Rate – 396m3/hour • PTO input speed – 1000RPM • Auto priming • Oil Cooling System • 200HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

MEC 5000 GEAR C/W SHAFT 55T POS 10 AM26BP Learn More

This kit contains the following parts :

• 1 x Shim 65 x 77 T.0.4 - Doda Part Number GRU241
• 1 x Shim 65x77 T.0.3 - Doda Part Number GRU242
• 1 x Shim 65x80- Doda Part Number BUL7576
• 1 x Bearing 6307- Doda Part Number CUS137
• 1 x CIR Clip - Doda Part Number BUL7313
• 1 x Oil Seal 35.80.10 - Doda Part Number GTP159
• 1 x Bearing 3208 - Doda Part Number CUS142
• 1 x Shim 45x65 - Doda Part Number BUL7567
Learn More

HD INPUT SHAFT 1" 3/4 Z=20 *shaft only Learn More

MEC 1000RPM GEAR C/ SHAFT 43 TEETH POS 9 TO SUIT 9000L, 11,000L AND 13,500L M SERIES PUMP 4020507012BP Learn More

HD35 Doda IV Pump R.1:1,6 without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 230HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

PEDESTAL PUMP SHAFT *KEYS NOT INCLUDED. Learn More

HD35 Gear Box Rear Cover Learn More

Doda L27/35 PTO Shaft - T 'Shear Bolt Protected' 1 3/8" 6 Spline x 1 3/8" 6 Spline Learn More

JUROP PN155 M 1000RPM GEAR Z41 165109KGB0 Learn More

HD35 1:2.73 2020 SPLINED PARTS KIT THIS KIT CONTAINS: 1 X PINION SPLINED SHAFT 1000RPM 1:2.73 Z=19 TEETH - GRU195Z 1 X SELF LOCKING IMPELLER NUT - BUL7000 1 X AFI BLADE SPLINED AND BALANCED - 0608016 1 X REVERSE BLADE SUPPORT C/W BRONZE BUSH - 0608019 2 x AFI REVERSE BLADE - 1502 Learn More

Brass Rotor For Vacuum Primer & Shaft Learn More

JUROP OIL FLANGE PN140/LC420 1610512900 PN130 M PN140 M PN155 M PN155R M PN 130 D – Splined shaft PN 140 D – Splined shaft PN 155 D – Splined shaft Learn More

L35 Doda Pump 1000RPM R.1:2,38 without primer • Max Output pressure – 12bar • Max Flow Rate – 255m3/hour • PTO input speed – 1000RPM • Auto priming • 130HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 2-3 WEEKS Learn More

HD35 COMPLETE GEARBOX R.1.2.73 C/W SPLINED SHAFT C/W WITH OIL PUMP IDR220SX ONLY *3-4 week delivery leadtime Learn More

L27 OUTPUT SHAFT 1:3.35 Z=19 Learn More

BATTIONI MEC GEAR 23 TEETH TO SUIT 6500 & 8000L M SERIES PUMP POS 19 AMEC33BP Learn More

MEC 5000 GEAR 21 TEETH POS 19 AM33BP Learn More

SELF LOCKING IMPELLER NUT HD35 2020 *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

CROWN GEAR - AFI L27 1000RPM 1:3,35 Z = 64 (TEETH) Learn More

L27 OUTPUT SHAFT 540 1:4.93 Z=14 TEETH Learn More

SPLINED HYDRAULIC HUB Z=12 CONICAL SHAFT FOR HD HYDRAULIC PUMP Learn More

JUROP PN106 PUMP DIRECT DRIVE SPLINED SHAFT 1300RPM 11000L *VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED *NO GEARBOX *PLEASE CONTACT US TO ENQUIRE AVAILABILITY ON THIS PUMP LEAD TIME WILL THEN BE GIVEN Learn More

BRONZE BUSH AFI HD35 2020 *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

HD35 CROWN GEAR 824RPM R.1:3.31 Z=53 TEETH Learn More

This kit contains the following parts :

• 1 x Oil Seal 50.72.10- Doda Part Number GTP139
• 1 x Taper Roller Bearing 31310 - Doda Part Number CUS118
• 1 x Shim 95x110MM - Doda Part Number BUL7593
• 1 x Bearing 3307- Doda Part Number CUS175
• 1 x Shim 65x77 T.04MM - Doda Part Number GRU241
• 1 x Shim 65x77 T.03MM - Doda Part Number GRU242

Learn More

L27 Doda Pump 1000RPM R.1:3,35 without primer • Max Output pressure – 14.5bar • Max Flow Rate – 200m3/hour • PTO input speed – 1000RPM • Auto priming • 125HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 3-4 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

IV OUTPUT PINION SHAFT R.1:1.19 - Z=21 TEETH *SHAFT GRU112M ONLY Learn More

HD35 2020 PINION SPLINED SHAFT 1000RPM 1:2.73 Z=19 TEETH Learn More

DANFOSS OMS 400 HYDRAULIC MOTOR C/W PRESET RELIEF VALVE 32MM SHAFT 10MM KEY WAY SUITABLE FOR HOSE REELERS Learn More

HD Output Shaft Key Learn More

Doda HD35 PTO Shaft 'Shear Bolt Protected' 1 3/4" 20 Spline - 1 3/8" 6 Spline Learn More

DRIVE GEAR Z48 PN45-58-84-106M 1651000000 Learn More

HD OUTPUT SHAFT COVER *bolts etc not included Learn More

This kit includes the following: 1 x GRU131 Crown Gear Z - 21 (Teeth) 1 x GRU133 Crown Gear Z - 42 (Teeth) 1 x GRU121 Crown Gear Z - 50 (Teeth) * LEAD TIME APPROX 2-3 WEEKS FROM ORDER Learn More

HD35 Doda IV Pump R.1:1,19 c/w oil cooler, without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 180HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 5-6 WEEKS Learn More

HD35 1:3.31 SPLINED OUTPUT SHAFT Z=16 TEETH *NEW SPLINED SHAFT 1:3.31 Learn More

GEAR Z 28 PN130M PN140M 1651005500 Learn More

REVERSE BLADE SUPPORT INCLUDES BRONZE BUSH *NUTS, BOLTS AND WASHERS NOT INCLUDED *FOR NON SPLINED SHAFT Learn More

BATTIONI GARDA PTO SPLINED SHAFT G26BP *LEADTIME IS APPROX. 8 WEEKS Learn More

OUTPUT SHAFT Z=21 TEETH L35 1:2.38 IV 1:1.6 Learn More

Tanker Wide Angle PTO Shaft 1400mm 1" 3/8 Z6 to 1" 3/8 Z6 Learn More

JUROP PN140 PUMP DIRECT DRIVE SPLINED SHAFT 14000L *VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED *NO GEARBOX *PLEASE CONTACT US TO ENQUIRE AVAILABILITY ON THIS PUMP LEAD TIME WILL THEN BE GIVEN Learn More

REVERSE BLADE SUPPORT HD35 2020 INCULDING BRONZE BUSH *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

HD35 CROWN GEAR 1000RPM R.1:2.73 Z=52 TEETH Learn More

CROWN GEAR - AFI L35 1000RPM 1:2,38 Z = 50 (TEETH) Learn More

L35 OUTPUT SHAFT 1:3.88 RATIO 17 TEETH Learn More

HD35 OUTPUT SHAFT RATION - 1:3.05 17 TEETH *DELIVERY TIME IS 3-4 WEEKS FOR THIS PART Learn More

JUROP PN155 PUMP DIRECT DRIVE SPLINED SHAFT *VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED *NO GEARBOX *PLEASE CONTACT US TO ENQUIRE AVAILABILITY ON THIS PUMP LEAD TIME WILL THEN BE GIVEN Learn More

AFI BLADE SPLINED AND BALANCED *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

This kit contains the following parts :

• 1 x Oil Seal  - Doda Part Number GTP257
• 1 x Bearing  - Doda Part Number CUS170
• 1 x Bearing  - Doda Part Number CUS162
• 1 x SHIMS 70 X 85 - 0.3/0.4/0.5; - Doda Part Number BUL7573
• 1 x Cir Clip - Doda Part Number BUL7316
• 1 x Oil Seal  - Doda Part Number GTP247

Learn More

DANFOSS OMR 315 HYDRUALIC MOTOR SUITABLE FOR HOSE REELERS 25MM SHAFT 8MM KEY WAY Learn More

HD Gear Box Oil Plug Learn More

PINION GEAR Z19 PN45-58-84-106 M 1651000100 Learn More

JUROP GEAR Z 70 540RPM PN130M AND PN140M - POS 21 1651010500 Learn More

This kit includes the following: 1 x GRU130 Crown Gear Z - 29 (TEETH) 1 x GRU132 Crown Gear Z - 43 (TEETH) 1 x GRU121 Crown Gear Z - 50 (TEETH) Learn More

VOGELSANG BLADE RING THIN 24 40 ECL TMS0051 BLADE ANGLE: 80° Learn More

ALRENA V36 WEARPLATE SCREEN - G5 * ONLY 1 SUPPLIED * 2 REQUIRED PER MACERATOR Learn More

END COVER GASKET PN45-58-84M -106M 1680700000 Learn More

VOGELSANG FLAT GASKET EXACUT 4MM DFD0416 Learn More

OIL DRIPPER 2 ON PUMP PN45-58-84-106M PN45-58-84-106D 1401200400 Learn More

OIL LINE RUBBER PROTECTION PN23-33-45-58-84-106D PN23-33-45-58-84-106M 1642600000 Learn More

KNOB FOR 5" SIGHT GLASS RIV 9925 *COLOURS MAY VARY Learn More

JUROP PN130-140-155 HANDLE 1605500100 Learn More

VOGELSANG TFL.515.N3 CUTTING RING WIDE ECL2440 SINGLE LARGE OPENINGS Learn More

MEC 5000/65/8000 PTO CONE POS 16 AM45ABP Learn More

Garda MEC 11000L Dual Pump System

11000L MEC Vacuum Pump
Centrifugal Pump
Garda Gearbox c/w Change Over Handle

Ideal for rain gun or umbilical applications

Manufacturer Part Number: G7511000

Learn More

JUROP OIL TANK PN 45-58-84-106 D - POS 12 PN 45-58-84-106 M - POS 12 1892006200 1612500300 Learn More

HYDRAULIC 90° CONNECTION M1/8" RAC211 Learn More

AFI L27-L35 Gearbox Housing Learn More

HERTELL FLANGE O-RING FOR 6" GATE VALVE 02LA150017 NO. 17 Learn More

CLAMP 100-110 D/BOLT Learn More

JUROP VANE PN106M PN106D 1601601000 4 REQUIRED ON PUMP Approximate dimensions: 443mm x 60mm x 9mm Learn More

ALRENA SEAL 110X130X12 * 1 REQUIRED PER MACERATOR Learn More

Alloy interlocking coupling suitable for lay-flat drag hoses. Complete as pair (2 halves) Spanner not included Learn More

JUROP OIL TANK REPLACEMENT KIT .PN140-155-160SL Learn More