Search results for 'Doda complete pump'

Afi L35 Pump Body c/w Garda Evo13500L Complete with Widia Seal and Blade No Suction Cone GARDA EVO Learn More

HD35 Complete Gearbox only R.1:3,31 Complete with oil pump IDR220SX only *3-4 week delivery leadtime Learn More

HD35 COMPLETE GEARBOX R.1.2.73 C/W SPLINED SHAFT C/W WITH OIL PUMP IDR220SX ONLY *3-4 week delivery leadtime Learn More

DODA PUMP FRAME COMPLETE WITH LEGS AND PINS BRACKET REQUIRED FOR FITTING L27/L35 PUMP MODELS Learn More

BATTIONI AUTOMATIC OIL PUMP COMPLETE RH MEC/M SERIES TO SUIT BATTIONI MEC PUMPS ###EMAIL FOR LEAD TIME### Learn More

L35 Doda Pump 1000RPM R.1:2,38 without primer • Max Output pressure – 12bar • Max Flow Rate – 255m3/hour • PTO input speed – 1000RPM • Auto priming • 130HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 2-3 WEEKS Learn More

HYDRAULIC HOSE KIT FOR HERTELL PRIMER PUMP Learn More

PULLEY 132 1/A FOR: - 24/5 IV PUMP - L35 IV PUMP *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn More

HD35 Doda Pump 1:2.73-Z c/w New 2020 Splined Shaft & Chopper System WITHOUT PRIMER • Max Output pressure – 17bar • Max Flow Rate – 350m3/hour • PTO input speed – 1000RPM • Auto priming • Oil Cooling System • 155HP+ required to operate this pump • 2020 New Chopping system and splined shaft *All values are only a guide and may vary differently in each situation *NOTE: REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

Lasts on average 5 times longer than standard body housing
Doda AFI HD35 & L35 Pump Body Housing Widia Blue Hardened High Abrasion Resistant Hard Wearing Pump Body For Sand Pumping And High Abrasion Applications

Learn More

AFI REVERSE BLADE 1 X BLADE *2 REQUIRED PER PUMP (FIXINGS NOT INCLUDED) Learn More

PEDESTAL PUMP SHAFT *KEYS NOT INCLUDED. Learn More

This kit contains the following parts :

• 1 x 4" Rubber O-Ring - Doda Part Number GTP213
• 1 x Bauer Cone for Afi Pumps; Doda Part Number 3182
• 1 x 6" Rubber O-Ring - Doda Part Number GTP214

*note - bauer cone not complete with clamps Learn More

Stator AFI Vacuum Pump - Cast Iron Learn More

BRONZE BUSH AFI HD35 2020 *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

This kit includes: 1 x Oil Pump for HD pumps - IDR220SX 2 x Female 3/8" flange - IDR269 Learn More

HD35 Doda IV Pump R.1:1,6 without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 230HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

FILTERING ELEMENT FOR PSC366 COMPLETE FILTER Learn More

BELT A37-1/2 FOR VACUUM PRIMER FOR IV PUMP PULLY BELT Learn More

COMPLETE GEARBOX ONLY - L35 R.1:2.38 1000 RPM *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn More

L35 Doda Pedestal Pump without primer ##EMAIL FOR LEAD TIME ## Learn More

HYDRAULIC PUMP RIGHT CC4.2 FOR IV TYPE COOLING SYSTEM POLARIS HYDRAULIC PUMP FOR OIL COOLING - HD35 IV ONLY Learn More

NEW HIGH THICKNESS, HARD WEARING AFI HD35 & L35 PUMP BODY HOUSING WIDIA Learn More

AFI L27 Pump Body Housing Widia Learn More

HD35 Doda Pump R.1:3,31 without primer c/w Splined Shaft & Chopper System • Max Output pressure – 17bar • Max Flow Rate – 396m3/hour • PTO input speed – 1000RPM • Auto priming • Oil Cooling System • 200HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

SELF LOCKING IMPELLER NUT HD35 2020 *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

SPLINED HYDRAULIC HUB Z=12 CONICAL SHAFT FOR HD HYDRAULIC PUMP Learn More

REVERSE BLADE SUPPORT HD35 2020 INCULDING BRONZE BUSH *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

VALVE DODA PUMP Learn More

L27 Doda Pump 1000RPM R.1:3,35 without primer • Max Output pressure – 14.5bar • Max Flow Rate – 200m3/hour • PTO input speed – 1000RPM • Auto priming • 125HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 3-4 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

COMPLETE GEARBOX ONLY L27 R.1:3,35 (E2011) *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn More

AFI BLADE SPLINED AND BALANCED *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

HD35 Doda IV Pump R.1:1,19 c/w oil cooler, without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 180HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 5-6 WEEKS Learn More

BRACKET FOR DODA FRAME FOR FITTING L27/L35 PUMP MODELS Learn More

L27/L35 RUBBER CONE GASKET SEAL *SEAL ONLY Learn More

This item contains the following part :

• 1 x AFI L27 Impeller - Doda Part Number 2978

 

Learn More

Sealing Ring for Widia Holder Learn More

Vacuum Primer Body Cover - Bearing Side Learn More

Doda L27/35 PTO Shaft - T 'Shear Bolt Protected' 1 3/8" 6 Spline x 1 3/8" 6 Spline Learn More

HD35 1:2.73 2020 SPLINED PARTS KIT THIS KIT CONTAINS: 1 X PINION SPLINED SHAFT 1000RPM 1:2.73 Z=19 TEETH - GRU195Z 1 X SELF LOCKING IMPELLER NUT - BUL7000 1 X AFI BLADE SPLINED AND BALANCED - 0608016 1 X REVERSE BLADE SUPPORT C/W BRONZE BUSH - 0608019 2 x AFI REVERSE BLADE - 1502 Learn More

HD GEARBOX BOTTOM COVER (E4241) *COVER ONLY Learn More

HD35 1:3.31 SPLINED OUTPUT SHAFT Z=16 TEETH *NEW SPLINED SHAFT 1:3.31 Learn More

BATTIONI MEC GEAR 23 TEETH TO SUIT 6500 & 8000L M SERIES PUMP POS 19 AMEC33BP Learn More

JUROP VANE PN106M PN106D 1601601000 4 REQUIRED ON PUMP Approximate dimensions: 443mm x 60mm x 9mm Learn More

This kit contains the following parts:

• 1 x Oil Seal - Doda Part Number GTP217
• 1 x Bearing - Doda Part Number CUS201
• 1 x AFI GEARBOX SHIMS DIA. 85 X 100 (0.3/0.4/0.5) BUL7574
• 1 x Bearing - Doda Part Number CUS163

Learn More

HD35 Gear Box Rear Cover Learn More

L27 OUTPUT SHAFT 1:3.35 Z=19 Learn More

Galvanised 90 Degree Elbow M/F 3/4" Learn More

BOLT M1/8" ART.290 (E4241) Learn More

Hertell Heavy duty high capacity primer pump. - Hydraulic motor - Oil feed droppers - 1" hose connectors * Note - Hydraulic motor hoses and oil bottles not included Learn More

INPUT PINION SHAFT AFI IV GEAR BOX FOR SPLINED SHAFT Z12 *3242B ONLY *SPLINED. PLEASE CHECK CURRENT SHAFT BEFORE ORDERING *LEAD TIME FOR THIS PART IS 3-4 WEEKS Learn More

BATTIONI MEC 11000 LTR HYDRAULIC VAC PUMP 9363754041 Learn More

COMPENSATION RING 2 ON PUMP PN 45-58-84-106 D PN 45-58-84-106 M 4026300020 Learn More

OIL PUMP DRIVE PN22-33 - 45-58-84 -106 -130-140-155D PN23-33 - 45-58-84-106-130-140-155 M 1622002600 Learn More

AFI IMPELLER RING NUT TORQUING TOOL (BUL7002) Learn More

This item contains the following part :

• 1 x L27 Convoyer Housing - Doda Part Number 2976

 

 

Learn More

Bronze Bush Learn More

CROWN GEAR - AFI L35 1000RPM 1:2,38 Z = 50 (TEETH) Learn More

HD35 OUTPUT SHAFT RATION - 1:3.05 17 TEETH *DELIVERY TIME IS 3-4 WEEKS FOR THIS PART Learn More

HD INPUT SHAFT 1" 3/4 Z=20 *shaft only Learn More

OIL PUMP GASKET PN130-140-155M PN130-140-155D 1680609700 Learn More

• Record keeping per field
• Live flow rate
• Live application rate
• Target forward speed advised
• Saves space in cab
• Hydraulic control (optional) all on same screen
• Rate control with regulation valve or forward speed adjustment (depending on tractor)
• Umbilical or Tanker compatible
• Units displayed in Cubic meters (m3) or imperial gallons

Learn More

L35 OUTPUT SHAFT 1:3.88 RATIO 17 TEETH Learn More

Jurop PN106M Vacuum Pump 11000L 540 RPM GEARBOX C/W EXHAUST MANIFOLD AND SUCTION MANIFOLD * VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED Learn More

L27 WELD ON FLANGE OUTLET Learn More

SHIM 65 X 85 0.1 Learn More

PEDESTAL HOUSING *HOUSING ONLY Learn More

MEC 1000RPM GEAR C/ SHAFT 43 TEETH POS 9 TO SUIT 9000L, 11,000L AND 13,500L M SERIES PUMP 4020507012BP Learn More

JUROP OIL PUMP FILTER DIA 6 4022300001 PN 23-33 D PN 23-33 M PN 45-58-84 D PN 45-58-84 M PN 106 D PN 106 M Learn More

Alloy interlocking coupling suitable for lay-flat drag hoses. Complete as pair (2 halves) Spanner not included Learn More

This item contains the following part :

• 1 x AFI HD35 & L35 Impeller - Doda Part Number 3003

Learn More

Bolt M1/2" Learn More

L27/L35 INPUT SHAFT 1" 3/8 Z=6 TEETH Learn More

Spiraled Hose 25mm c/w Hose Clips Learn More

This suits both 1:1,19 and 1:1,6 gearbox ratios This kit includes: 1 x 31310 Taper Koyo Bearing - CUS118 3 x Bearing 33208/Q - CUS119 1 x Bearing 32307J2 - CUS120 1 x Bearing 33109/Q - CUS121 1 x Oil Seal 50.72.10 - GTP139 1 x Oil Seal 45.60.7- GTP140 Learn More

AFI SUCTION CONE VALVE ASSEMBLY CAT FLAP *GTP135 - NOT INCLUDED Learn More

AFI HD35 GLV CONE COVER *SEAL NOT INCLUDED Learn More

JUROP PN106 PUMP DIRECT DRIVE SPLINED SHAFT 1300RPM 11000L *VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED *NO GEARBOX *PLEASE CONTACT US TO ENQUIRE AVAILABILITY ON THIS PUMP LEAD TIME WILL THEN BE GIVEN Learn More

Flowmeter c/w DD Slurry Monitor (Kit includes flow meter, in cab display, wiring harness & speed input lead)

• Comes with compact in cab hand set display
• Speed input lead for forward ground speed from the tractors CANBUS (dash)
• Compatible with Umbilical Systems & Tankers
• Live application rate
• Total volume recorded
• Indicates the correct driving speed to achieve application rates
• RTK data
• Jobs saved
• Individual fields saved
• USB port for downloading data
• Clean waterproof display that can be wiped clean
• Units in UK Gallons or Cubic Meters
• Can be used with GPS speed sensor

Learn More

• Record keeping per field
• Live flow rate
• Live application rate
• Target forward speed advised
• Saves space in cab
• Hydraulic control (optional) all on same screen
• Rate control with regulation valve or forward speed adjustment (depending on tractor)
• Umbilical or Tanker compatible
• Units displayed in Cubic meters (m3) or imperial gallons

Learn More

This kit contains the following parts :

• 1 x Oil Plug 3/8" - Doda Part Number GRU127
• 1 x Oil Plug Gasket Seal - Doda Part Number GTP246

Learn More

O Ring AFI L27 Learn More

Brass Rotor For Vacuum Primer & Shaft Learn More

Battioni MEC 11000 Ltr Slurry Pump
540 RPM Gearbox

Availability - 7 to 14 Days

9003700041 Learn More