Search results for '4 lever tap'

ALRENA V42 WEARPLATE SCREEN - G5 * ONLY 1 SUPPLIED * 2 REQUIRED PER MACERATOR * NOTE - ONLY FOR USE IN MACERATORS WITH SERIAL PLATES PRE 2023 Learn More

100MM OVERFLOW VALVE WITH DOUBLE BALL & SIGHT GLASS Learn More

VOGELSANG CUTTING RING - 30-40 ECQ TML0136 Learn More

BALL BEARING DEEP GROVE 6307 TO SUIT MEC 5000 - 13500 M SERIES PUMPS 5012107010 POS 10 - 9000, 11000 & 13500 M SERIES PUMPS POS 11 - 5000, 6500 & 8000 M SERIES PUMPS Learn More

JUROP PN106 PUMP DIRECT DRIVE SPLINED SHAFT 1300RPM 11000L *VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED *NO GEARBOX *PLEASE CONTACT US TO ENQUIRE AVAILABILITY ON THIS PUMP LEAD TIME WILL THEN BE GIVEN Learn More

MERLETT 51MM GREEN EXTREME ELASTIC HOSE 50M COIL Learn More

BATTIONI LOCK NUT FOR GARDA 75 G37BP Learn More

RIV 80MM RUBBER FLOATING BALL RIV 9912 Learn More

JUROP PN155 M GEARBOX FLANGE 161059TDB0 Learn More

VOGELSANG TFL.615.N3 CUTTING RING ECL30-40 - 50 SINGLE LARGE OPENINGS Learn More

JUROP OIL TANK PLUG PN106 SL 1000RPM - POS 89 PN130M, PN140M PN155M - POS 87 PN130D, PN140D - POS 78 4026910103 Learn More

This kit contains the following parts :

• 1 x Oil Seal  - Doda Part Number GTP257
• 1 x Bearing  - Doda Part Number CUS170
• 1 x Bearing  - Doda Part Number CUS162
• 1 x SHIMS 70 X 85 - 0.3/0.4/0.5; - Doda Part Number BUL7573
• 1 x Cir Clip - Doda Part Number BUL7316
• 1 x Oil Seal  - Doda Part Number GTP247

Learn More

BRONZE BUSH AFI HD35 2020 *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

Bronze Bush Learn More

4" SERRATED WELD ON PIPE CONNECTION Learn More

Unidirectional Oil Flow Valve * LEAD TIME = 3-4 WEEKS ON THIS PRODUCT Learn More

VOGELSANG EXACUT 36-40 FLAT GASKET ECQ MACERATOR ONLY DFD0438 Learn More

4" Single Acting Hydraulic Spring Jack Ram Learn More

PULLEY 132 1/A FOR: - 24/5 IV PUMP - L35 IV PUMP *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn More

HD35 Doda Pump R.1:3,31 without primer c/w Splined Shaft & Chopper System • Max Output pressure – 17bar • Max Flow Rate – 396m3/hour • PTO input speed – 1000RPM • Auto priming • Oil Cooling System • 200HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

BLUE HARDENED HIGH ABRASION RESISTANT DODA AFI HD35 & L35 IMPELLER HARD WEARING IMPELLER FOR SAND PUMPING AND HIGH ABRASION APPLICATIONS ### EMAIL FOR LEAD TIME ### Learn More

SEAL RING 72 X 40 X 10 PN45-58-84-106M PN130-140-155M 4022200040 Learn More

ALRENA GASKET V30 * 1 REQUIRED PER MACERATOR Learn More

OIL PUMP GASKET PN130-140-155M PN130-140-155D 1680609700 Learn More

HD GEARBOX BOTTOM COVER (E4241) *COVER ONLY Learn More

JUROP CONVEYOR PN45-58-84-106 PN45-58-84-106M PN45-58-84-106D 1608500000 Learn More

SIGHT GLASS STEEL DISC Learn More

RIV 3/4" EXPORT BALL VALVE M/F PN25 Learn More

STEEL STRUCTURE FOR 5" SIGHT GLASS Learn More

STEM AND SCREWED RING FOR 4" EXPORT BALL VALVE RIV 5550 / CW614 Learn More

MEC 1000RPM GEAR C/ SHAFT 43 TEETH POS 9 TO SUIT 9000L, 11,000L AND 13,500L M SERIES PUMP 4020507012BP Learn More

HEAVY DUTY HANDLE KIT FOR 8" BRASS VALVE (6" HANDLE KIT ALSO AVAILABLE) Learn More

6" RUBBER FUNNEL 6 INCH RUBBER FUNNEL *CLIP NOT INCLUDED *COLOURS MAY VARY Learn More

This kit contains the following parts :

• 1 x Cover for A7D Gearbox - Doda Part Number GRU176
• 8 x VSP Bolt M8x20 - Doda Part Number BUL5601
• 8 x M8 Washer - Doda Part Number BUL8201
• 1 x Plug Drain - Doda Part Number RAC100
GTP141 is no longer provided. Please use silicon gel instead

Learn More

HD35 GEARBOX SUPPORT Learn More

L27 OUTPUT SHAFT 1:3.35 Z=19 Learn More

HD35 1:2.73 2020 SPLINED PARTS KIT THIS KIT CONTAINS: 1 X PINION SPLINED SHAFT 1000RPM 1:2.73 Z=19 TEETH - GRU195Z 1 X SELF LOCKING IMPELLER NUT - BUL7000 1 X AFI BLADE SPLINED AND BALANCED - 0608016 1 X REVERSE BLADE SUPPORT C/W BRONZE BUSH - 0608019 2 x AFI REVERSE BLADE - 1502 Learn More

ALUMINIUM SPREADER NOZZLE DN60 Learn More

BOLT M1/8" ART.290 (E4241) Learn More

JUROP PNR SILENCER 122-155 PN106/140 15470D2CB0 Learn More

Rubber Gasket Afi Outlet 190 x 120 Learn More

CLAMP 100-110 D/BOLT Learn More

JUROP O-RING 4825 PN45-58-84-106M PN45-58-84-106D 4022200240 Learn More

VOGELSANG EXACUT 42-40 FLAT GASKET - ECQ DFD0452 Learn More

COCK MANIFOLD PN130M PN140M PN155M PN130D PN140D PN155D 1623100500 Learn More

IV OUTPUT PINION SHAFT R.1:1.19 - Z=21 TEETH *SHAFT GRU112M ONLY Learn More

HERTELL PRIMER VANE B400 4 REQUIRED ON EACH PRIMER Approximate dimensions: L - 100mm W - 42mm H - 7.5mm 01BO004015 Learn More

HERTELL OIL DRIPPER SAME FOR ALL B MODELS (B-400 TO B-2200) *NOT SUITABLE WITH DODA OIL RESERVOIR GLOBE (PVC111) 01BO822018 Learn More

8" GLADIO KNIFE GATE VALVE Learn More

JUROP PN130-140-155 CONVEYOR 1608502500 Learn More

VOGELSANG BLADE RING 90 DEGREES 40-40.50/48.40 SINGLE THIN BLADE TMS0002 Learn More

INPUT PINION SHAFT AFI IV GEAR BOX FOR SPLINED SHAFT Z12 *3242B ONLY *SPLINED. PLEASE CHECK CURRENT SHAFT BEFORE ORDERING *LEAD TIME FOR THIS PART IS 3-4 WEEKS Learn More

JUROP 4 WAY COCK PN130, 140, 155M - POS 6 PN130, 140, 155D - POS 6 1608502505 Learn More

5" OROFLEX 20 - 200 METRE LENGTH NO COUPLINGS SUPPLIED Only available in 200m lengths. Price shown is for 1 x 200m box(@ £19.32/metre) Ships 400m per pallet Learn More

Bolt M1/2" Learn More

8" GATE VALVE 2 FLANGES 11MM DRILLED HOLE *Manufacturer may vary Learn More

Brass Hose Barb 3/4" x 25mm Learn More

VOGELSANG CUTTING RING 36-40 ECQ MACERATOR ONLY TML0134 Learn More

6" Swivel Joint 29cm x 29cm x 12.7cm height *COLOURS MAY VARY Learn More

L27 WELD ON FLANGE OUTLET Learn More

This kit includes the following: 1 x O Ring PD version - GTP131 1 x Oil Seal Holder PD Impeller Side - 3026 2 x Oil Seal 45.60.10 - GTP130 1 x BEARING SKF 31309 J2/QCL7C (30309DJ) - CUS114 1 x Bearing 6209 - CUS115 1 x Shim 65 x 85 - BUL7557 Learn More

JUROP V-RING VA 50 4022203021 Julia 3000 - 5000 Julia 7000 - 8000 - Pump PN - PNR - LC Learn More

SELF LOCKING NUT M24X2 PN45-58-84-106 D PN45-58-84-106 M 4026305614 Learn More

ALRENA SEAL 110X130X12 * 1 REQUIRED PER MACERATOR Learn More

GEARBOX COVER PN45-58-84-106 M 1612503100 Learn More

7" SOFT SPONGE BALL HIGH DURABLE NEOPRENE Learn More

JUROP OIL TANK REPLACEMENT KIT .PN140-155-160SL Learn More

FLAPPER VALVE PN 45-58-84-106 D PN 45-58-84-106 M 1593600000 Learn More

AFI REVERSE BLADE 1 X BLADE *2 REQUIRED PER PUMP (FIXINGS NOT INCLUDED) Learn More

RIV 1/4" X 60 MANOVACUUM METER Learn More

O-RING FOR PERLA 4"/5"/6" GATE VALVES RIV 9858 Learn More

JUROP PN130-140-155 SELF LOCKING NUT M36X3 4026306115 Learn More

MEC 5000/65/8000L DIPSTICK 130MM POS 32 Learn More

4" 90 BEND 4 INCH 90 BEND 4 INCH 90 DEGREE BEND Learn More

This kit contains the following parts :

• 1 x Shim 65 x 77 T.0.4 - Doda Part Number GRU241
• 1 x Shim 65x77 T.0.3 - Doda Part Number GRU242
• 1 x Shim 65x80- Doda Part Number BUL7576
• 1 x Bearing 6307- Doda Part Number CUS137
• 1 x CIR Clip - Doda Part Number BUL7313
• 1 x Oil Seal 35.80.10 - Doda Part Number GTP159
• 1 x Bearing 3208 - Doda Part Number CUS142
• 1 x Shim 45x65 - Doda Part Number BUL7567
Learn More

BATTIONI OIL SEAL 35.50.7 35507 POS 52 SUITS: MEC 9000, 11000, 13500 M SERIES PUMPS Learn More

L27 OUTPUT SHAFT 540 1:4.93 Z=14 TEETH Learn More

8" RUBBER FLANGE GASKET 4 BOLT SQUARE 6MM Learn More

1 1/2" Pressure Relief Valve Learn More

4" GLADIO SCREWED LOCKING RING - NEW SERIES RIV 9848 Learn More

Jurop PN106M Vacuum Pump 11000L 540 RPM GEARBOX C/W EXHAUST MANIFOLD AND SUCTION MANIFOLD * VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED Learn More

CABLE PULLEY 80MM DIA. Learn More

4" Rubber O-Ring Learn More

4" SWIVEL JOINT O RING Learn More