Search results for 'L35 IV Bearing & Seal Kit'

HD35 Doda IV Pump R.1:1,6 without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 230HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

JUROP PN106 VACUUM PUMP C/W HYDRAULIC DRIVE 11000 LTR * VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED

Learn More

RIV 1/4" X 60 MANOVACUUM METER Learn More

RIV PERSPEX BOWL FOR SIPHON APPRIX DIMENSIONS: LENGTH = 14CM WIDTH INSIDE TO INSIDE AT SCREW = 18CM Learn More

HYDRAULIC PUMP RIGHT CC4.2 FOR IV TYPE COOLING SYSTEM POLARIS HYDRAULIC PUMP FOR OIL COOLING - HD35 IV ONLY Learn More

STEM AND SCREWED RING FOR 4" EXPORT BALL VALVE RIV 5550 / CW614 Learn More

This item contains the following part :

• 1 x AFI L27 Reverse Impeller - Doda Part Number 2977

 

Learn More

CROWN GEAR - AFI L35 1000RPM 1:2,38 Z = 50 (TEETH) Learn More

This kit includes the following: 1 x GRU131 Crown Gear Z - 21 (Teeth) 1 x GRU133 Crown Gear Z - 42 (Teeth) 1 x GRU121 Crown Gear Z - 50 (Teeth) * LEAD TIME APPROX 2-3 WEEKS FROM ORDER Learn More

5" SIGHT GLASS - BOWL ONLY Learn More

8" SWIVEL JOINT *COLOURS MAY VARY 35cm x 35cm x 12.7cm height Learn More

60MM RUBBER FLOATING BALL RIV 9912 Learn More

8" SINGLE ACTING HYDRAULIC SPRING JACK RAM Learn More

AFI GEARBOX SUPPORT L27/L35 3034 Learn More

DODA PUMP FRAME COMPLETE WITH LEGS AND PINS BRACKET REQUIRED FOR FITTING L27/L35 PUMP MODELS Learn More

O Ring AFI L35/HD35 Learn More

1 1/2" Vacuum Relief Valve * PRESET TO -0.9 BAR Learn More

L35 Doda Pedestal Pump without primer Learn More

100MM OVERFLOW VALVE WITH DOUBLE BALL & SIGHT GLASS Learn More

100MM RUBBER FLOATING BALL RIV 9912 Learn More

6" RUBBER FLANGE GASKET 4 BOLT SQUARE Learn More

8MM ROUND STEEL FLANGE TO SUIT 6" SWIVEL JOINT Learn More

JUROP PN106 PUMP DIRECT DRIVE SPLINED SHAFT 1300RPM 11000L *VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED *NO GEARBOX *PLEASE CONTACT US TO ENQUIRE AVAILABILITY ON THIS PUMP LEAD TIME WILL THEN BE GIVEN Learn More

5" GLADIO SEAT GASKET RIV 9847 Learn More

This item contains the following part :

• 1 x AFI HD35 & L35 Impeller - Doda Part Number 3003

Learn More

COMPLETE GEARBOX ONLY - L35 R.1:2.38 1000 RPM *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn More

DRIVE GEAR Z48 PN45-58-84-106M 1651000000 Learn More

BATTIONI MEC LOCK NUT M27X2 TO SUIT MEC 6500 & 8000M SERIES PUMPS POS 18 AME32BP 5050300002BP Learn More

RIV 4" GLADIO KNIFE GATE VALVE Learn More

4" GLADIO SCREWED LOCKING RING - NEW SERIES RIV 9848 Learn More

6" SWIVEL JOINT O RING Learn More

HD35 COMPLETE GEARBOX R.1.2.73 C/W SPLINED SHAFT C/W WITH OIL PUMP IDR220SX ONLY *3-4 week delivery leadtime Learn More

2" PRESSURE RELIEF VALVE 089025009011 Learn More

This kit contains the following parts :

• 1 x Cover for A7D Gearbox - Doda Part Number GRU176
• 8 x VSP Bolt M8x20 - Doda Part Number BUL5601
• 8 x M8 Washer - Doda Part Number BUL8201
• 1 x Plug Drain - Doda Part Number RAC100
GTP141 is no longer provided. Please use silicon gel instead

Learn More

HD35 OUTPUT SHAFT RATION - 1:3.05 17 TEETH *DELIVERY TIME IS 3-4 WEEKS FOR THIS PART Learn More

HD35 Doda Pump R.1:3,31 without primer c/w Splined Shaft & Chopper System • Max Output pressure – 17bar • Max Flow Rate – 396m3/hour • PTO input speed – 1000RPM • Auto priming • Oil Cooling System • 200HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

NEW HIGH THICKNESS, HARD WEARING AFI HD35 & L35 PUMP BODY HOUSING WIDIA Learn More

BATTIONI MEC 11000 REBUILD KIT - RED LINE 6010201081BP KIT CONTAINS: VANES SEALS O-RINGS BOLTS AND WASHERS Learn More

RIV DN80 PLASTIC FLOATING BALL RIV 9911 Learn More

HD35 1:2.73 2020 SPLINED PARTS KIT THIS KIT CONTAINS: 1 X PINION SPLINED SHAFT 1000RPM 1:2.73 Z=19 TEETH - GRU195Z 1 X SELF LOCKING IMPELLER NUT - BUL7000 1 X AFI BLADE SPLINED AND BALANCED - 0608016 1 X REVERSE BLADE SUPPORT C/W BRONZE BUSH - 0608019 2 x AFI REVERSE BLADE - 1502 Learn More

HD35/L35 WELD ON FLANGE OUTLET Learn More

IV OUTPUT PINION SHAFT R.1:1.19 - Z=21 TEETH *SHAFT GRU112M ONLY Learn More

RIV 5550 DN100 EXPORT BALL VALVE INOX PLATE - NO.10 Learn More

This item contains the following part:

• 1 x AFI HD35 & L35 Convoyer Housing - Doda Part Number 3001

Learn More

Rear Cover AFI L27-L35 Gearbox Learn More

6" Swivel Joint 29cm x 29cm x 12.7cm height *COLOURS MAY VARY Learn More

BATTIONI HOUSING TO SUIT BATTIONI MEC 9000, 11000 & 13500 M SERIES PUMPS POS 7 4010301028BP Learn More

RIV 4" EXPORT BALL FLANGED VALVE-MOUNTING PAD+ HANDLE Learn More

HEAVY DUTY HANDLE KIT FOR 6" BRASS VALVE (8" HANDLE KIT ALSO AVAILABLE) Learn More

8" GLADIO O-RING GASKET FOR FLANGE RIV 9859 Learn More

BRACKET FOR DODA FRAME FOR FITTING L27/L35 PUMP MODELS Learn More

GASKET FOR 4" PERLA CAP - RIV 9834 GUSS680D0016 Learn More

Brass Rotor For Vacuum Primer & Shaft Learn More

GEARBOX DRIVE END PLATE PN45-58-84-106 M 1610500000 Learn More

BATTIONI MEC 8000 REBUILD KIT 6010201008BP KIT CONTAINS: VANES SEALS O-RINGS BOLTS AND WASHERS Learn More

RIV 80MM RUBBER FLOATING BALL RIV 9912 Learn More

RIV 5550 DN100 BLUE FLANGED LEVER VALVE - O-RING/NO.7 Learn More

L35 OUTPUT SHAFT 1:3.88 RATIO 17 TEETH Learn More

80 Overflow Valve with Double Ball & Sight Glass Learn More

HD35 Complete Gearbox only R.1:3,31 Complete with oil pump IDR220SX only *3-4 week delivery leadtime Learn More

RIV 3/4" EXPORT BALL VALVE F/F FULL BORE Learn More

STEEL STRUCTURE FOR 5" SIGHT GLASS Learn More

AFI IV GEARBOX COVER - 3 INLET SIDE Learn More

BLUE HARDENED HIGH ABRASION RESISTANT DODA AFI HD35 & L35 IMPELLER HARD WEARING IMPELLER FOR SAND PUMPING AND HIGH ABRASION APPLICATIONS Learn More

RIV LEVER FOR 4" EXPORT BALL VALVE RIV 5550 RICAMBGENER Learn More

This item contains the following part :

• 1 x AFI L27 Impeller - Doda Part Number 2978

 

Learn More

This kit includes the following: 1 x GRU130 Crown Gear Z - 29 (TEETH) 1 x GRU132 Crown Gear Z - 43 (TEETH) 1 x GRU121 Crown Gear Z - 50 (TEETH) Learn More

RIV 6" GLADIO KNIFE GATE VALVE Learn More

Garda MEC 11000L Dual Pump System

11000L MEC Vacuum Pump
Centrifugal Pump
Garda Gearbox c/w Change Over Handle

Ideal for rain gun or umbilical applications

Manufacturer Part Number: G7511000

Learn More

AFI IV INLET CAP Learn More

HYDRAULIC HOSE KIT FOR HERTELL PRIMER PUMP Learn More

JUROP OIL TANK REPLACEMENT KIT .PN140-155-160SL Learn More

5" EXPORT BALL FLANGED VALVE C/W MOUNTING PAD + LEVER HANDLE Learn More

Sealing Ring for Widia Holder Learn More

2" Export Ball Valve F/F Steel Lever Handle Learn More

HD35 Doda IV Pump R.1:1,19 c/w oil cooler, without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 180HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 5-6 WEEKS Learn More

JUROP PN140 VACUUM PUMP C/W HYDRAULIC DRIVE 14000 LTR * VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED Learn More

RIV 1/2" M TO 1/4" FM BRASS REDUCER FOR MANO METER Learn More

O-RING FOR PERLA 4"/5"/6" GATE VALVES RIV 9858 Learn More

8MM ROUND STEEL FLANGE TO SUIT 8" SWIVEL JOINT Learn More

JUROP PN140 PUMP DIRECT DRIVE SPLINED SHAFT 14000L *VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED *NO GEARBOX *PLEASE CONTACT US TO ENQUIRE AVAILABILITY ON THIS PUMP LEAD TIME WILL THEN BE GIVEN Learn More

JUROP GASKET KIT PN155 M 18920CZRB0 Learn More

This item contains the following part :

• 1 x L27 Convoyer Housing - Doda Part Number 2976

 

 

Learn More

L27/L35 INPUT SHAFT 1" 3/8 Z=6 TEETH Learn More