Search results for 'Doda main shaft'

PEDESTAL HOUSING *HOUSING ONLY Learn More

L27/L35 RUBBER CONE GASKET SEAL *SEAL ONLY Learn More

VACUUM PRIMER OIL RESERVOIR Learn More

AFI REVERSE BLADE 1 X BLADE *2 REQUIRED PER PUMP (FIXINGS NOT INCLUDED) Learn More

HD35 CROWN GEAR 824RPM R.1:3.31 Z=53 TEETH Learn More

This item contains the following part:

• 1 x AFI HD35 & L35 Convoyer Housing - Doda Part Number 3001

Learn More

AFI HD35 GEARBOX SHIMS DIA. 85 X 100 (0.3/0.4/0.5) Learn More

O Ring AFI L27 Learn More

Bronze Bush Learn More

Dowell Learn More

Stator AFI Vacuum Pump - Cast Iron Learn More

VANE FOR DODA PRIMER 4 REQUIRED ON EACH PRIMER Approximate dimensions: L - 72mm W - 43mm H - 5mm Learn More

Galvanised 90 Degree Elbow M/F 3/4" Learn More

Bearing 6003 Learn More

Brass Hose Barb 3/4" x 25mm Learn More

Hydraulic Primer Motor Learn More

Unidirectional Oil Flow Valve * LEAD TIME = 3-4 WEEKS ON THIS PRODUCT Learn More

Spiraled Hose 25mm c/w Hose Clips Learn More

TOP HAT BAUER (PRIMING CAP) CLAMP INCLUDED *TOP HAT CLAMP MAY VARY Learn More

AFI Blade *NON SPLINED BLADE Learn More

AFI L27 Pump Body Housing Widia Learn More

Key 6 x 6 x 25 Learn More

Bearing 6205 Learn More

Vacuum Primer Body Cover - Bearing Side Learn More

Splash Guard Learn More

AFI HD35 Cone Liner 0606001 Learn More

AFI HD35 Cone Seal 3MM Learn More

Sealing Ring for Widia Holder Learn More

O Ring AFI L35/HD35 Learn More

Rear Cover AFI L27-L35 Gearbox Learn More

AFI L27-L35 Gearbox Housing Learn More

COMPLETE GEARBOX ONLY - L35 R.1:2.38 1000 RPM *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn More

COMPLETE GEARBOX ONLY L27 R.1:3,35 (E2011) *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn More

This kit contains the following parts:

• 1 x Oil Seal - Doda Part Number GTP217
• 1 x Bearing - Doda Part Number CUS201
• 1 x AFI GEARBOX SHIMS DIA. 85 X 100 (0.3/0.4/0.5) BUL7574
• 1 x Bearing - Doda Part Number CUS163

Learn More

Key 10 x 8 x 45 Learn More

CROWN GEAR - AFI L35 1000RPM 1:2,38 Z = 50 (TEETH) Learn More

CROWN GEAR - AFI L27 1000RPM 1:3,35 Z = 64 (TEETH) Learn More

Bolt M1/2" Learn More

HD35 CROWN GEAR 1000RPM R.1:2.73 Z=52 TEETH Learn More

4" Rubber O-Ring Learn More

Tanker Wide Angle PTO Shaft 1400mm 1" 3/8 Z6 to 1" 3/8 Z6 Learn More

Rubber Gasket Afi Outlet 190 x 120 Learn More

NEW HIGH THICKNESS, HARD WEARING AFI HD35 & L35 PUMP BODY HOUSING WIDIA Learn More

MEC 1000RPM GEAR C/ SHAFT 43 TEETH POS 9 TO SUIT 9000L, 11,000L AND 13,500L M SERIES PUMP 4020507012BP Learn More

MEC 5000 GEAR C/W SHAFT 55T POS 10 AM26BP Learn More

MEC 65/8000 GEAR C/W SHAFT 53T POS 10 Learn More

OIL SEAL HOLDER PD SUPPORT MOTOR SIDE Learn More

HD35 Gear Box Rear Cover Learn More

SELF LOCKING IMPELLER NUT Learn More

This kit contains the following parts :

• 1 x 4" Rubber O-Ring - Doda Part Number GTP213
• 1 x Bauer Cone for Afi Pumps; Doda Part Number 3182
• 1 x 6" Rubber O-Ring - Doda Part Number GTP214

*note - bauer cone not complete with clamps Learn More

This kit contains the following parts :

• 1 x Cover for A7D Gearbox - Doda Part Number GRU176
• 8 x VSP Bolt M8x20 - Doda Part Number BUL5601
• 8 x M8 Washer - Doda Part Number BUL8201
• 1 x Plug Drain - Doda Part Number RAC100
GTP141 is no longer provided. Please use silicon gel instead

Learn More

Lasts on average 5 times longer than standard body housing
Doda AFI HD35 & L35 Pump Body Housing Widia Blue Hardened High Abrasion Resistant Hard Wearing Pump Body For Sand Pumping And High Abrasion Applications

Learn More

HD35 Complete Gearbox only R.1:3,31 Complete with oil pump IDR220SX only *3-4 week delivery leadtime Learn More

L27 Doda Pump 1000RPM R.1:3,35 without primer • Max Output pressure – 14.5bar • Max Flow Rate – 200m3/hour • PTO input speed – 1000RPM • Auto priming • 125HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 3-4 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

BOLT M1/8" ART.290 (E4241) Learn More

This kit includes the following items: Blind Cap 72 x 10 - GTP240 Oil Seal 35.80.10 - GTP159 Oil Seal 50.72.10 - GTP139 Learn More

Oil Filter Assembly for HD Pumps Learn More

This kit includes: 1 x Oil Pump for HD pumps - IDR220SX 2 x Female 3/8" flange - IDR269 Learn More

This kit includes the following: 1 x GRU131 Crown Gear Z - 21 (Teeth) 1 x GRU133 Crown Gear Z - 42 (Teeth) 1 x GRU121 Crown Gear Z - 50 (Teeth) * LEAD TIME APPROX 2-3 WEEKS FROM ORDER Learn More

This kit includes the following: 1 x GRU130 Crown Gear Z - 29 (TEETH) 1 x GRU132 Crown Gear Z - 43 (TEETH) 1 x GRU121 Crown Gear Z - 50 (TEETH) Learn More

This suits both 1:1,19 and 1:1,6 gearbox ratios This kit includes: 1 x 31310 Taper Koyo Bearing - CUS118 3 x Bearing 33208/Q - CUS119 1 x Bearing 32307J2 - CUS120 1 x Bearing 33109/Q - CUS121 1 x Oil Seal 50.72.10 - GTP139 1 x Oil Seal 45.60.7- GTP140 Learn More

This kit includes the following: 1 x O Ring PD version - GTP131 1 x Oil Seal Holder PD Impeller Side - 3026 2 x Oil Seal 45.60.10 - GTP130 1 x BEARING SKF 31309 J2/QCL7C (30309DJ) - CUS114 1 x Bearing 6209 - CUS115 1 x Shim 65 x 85 - BUL7557 Learn More

HD Gear Box Oil Plug Learn More

L35 Doda Pump 1000RPM R.1:2,38 without primer • Max Output pressure – 12bar • Max Flow Rate – 255m3/hour • PTO input speed – 1000RPM • Auto priming • 130HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 2-3 WEEKS Learn More

L35 Doda Pedestal Pump without primer ##EMAIL FOR LEAD TIME ## Learn More

HD35 Doda IV Pump R.1:1,19 c/w oil cooler, without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 180HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 5-6 WEEKS Learn More

HD35 Doda IV Pump R.1:1,6 without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 230HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

This kit contains the following parts :

• 1 x Oil Plug 3/8" - Doda Part Number GRU127
• 1 x Oil Plug Gasket Seal - Doda Part Number GTP246

Learn More