Search results for '4 lever tap'

AFI IV INLET CAP Learn More

AFI IV GEARBOX COVER - 3 INLET SIDE Learn More

HYDRAULIC PUMP RIGHT CC4.2 FOR IV TYPE COOLING SYSTEM POLARIS HYDRAULIC PUMP FOR OIL COOLING - HD35 IV ONLY Learn More

6" PERROT ITALIAN MALE Q/R HOSE END GALVANISED TO SUIT Q/R FEMALE COUPLING Learn More

4 BOLT 8MM STEEL WELD ON FLANGE - TO SUIT 4.5" CONNECTION Learn More

4 BOLT 8MM STEEL WELD ON FLANGE - TO SUIT 6" CONNECTION Learn More

4 BOLT 8MM STEEL WELD ON FLANGE - TO SUIT 8" CONNECTION Learn More

8" RUBBER FLANGE GASKET 4 BOLT SQUARE 6MM Learn More

4" THREADED WELD ON STEEL TUBE TO SUIT BSP THREADED VALVE Learn More

HD35 1:2.73 2020 SPLINED PARTS KIT THIS KIT CONTAINS: 1 X PINION SPLINED SHAFT 1000RPM 1:2.73 Z=19 TEETH - GRU195Z 1 X SELF LOCKING IMPELLER NUT - BUL7000 1 X AFI BLADE SPLINED AND BALANCED - 0608016 1 X REVERSE BLADE SUPPORT C/W BRONZE BUSH - 0608019 2 x AFI REVERSE BLADE - 1502 Learn More

8MM ROUND STEEL FLANGE TO SUIT 4" SWIVEL JOINT Learn More

8MM ROUND STEEL FLANGE TO SUIT 6" SWIVEL JOINT Learn More

8MM ROUND STEEL FLANGE TO SUIT 8" SWIVEL JOINT Learn More

4" SLURRYKAT STAINLESS STEEL COUPLING C/W CLOSURE RING - SWIVEL COUPLING - INTEGRATED PU SEAL Learn More

VOGELSANG EXACUT 30-40 FLAT GASKET - ECQ DFD0434 Learn More

JUROP PN155 M GEARBOX FLANGE 161059TDB0 Learn More

5" SLURRYKAT CLOSURE RING Learn More

ALRENA V30 WEARPLATE SCREEN - LOWER FLOW - G3 * ONLY 1 SUPPLIED * 2 REQUIRED PER MACERATOR 200-030-113 Learn More

INPUT PINION SHAFT AFI IV GEAR BOX FOR SPLINED SHAFT Z12 *3242B ONLY *SPLINED. PLEASE CHECK CURRENT SHAFT BEFORE ORDERING *LEAD TIME FOR THIS PART IS 3-4 WEEKS Learn More

HERTELL COMPLETE PRIMER B800 - Hydraulic motor - Oil feed droppers * Note - Hydraulic motor hoses and oil bottles not included Learn More

5" WELD ON TEE *LEAD TIME IS 1 WEEK ON THIS ITEM Learn More

SEAL KIT TO SUIT: KM40.73 Learn More

• 12 Volt, comes with short loom and plug
• All flowmeters are wet tested and calibrated
• Compatible with all interfaces like slurry monitor, Isobus etc
• Heavy duty steel body construction and flanges
• Also available in 5”, 6” & 8” bore sizes

Learn More

• 12 Volt, comes with short loom and plug
• All flowmeters are wet tested and calibrated
• Compatible with all interfaces like slurry monitor, Isobus etc
• Heavy duty steel body construction and flanges
• Also available in 4”, 6” & 8” bore sizes

Learn More

• 12 Volt, comes with short loom and plug
• All flowmeters are wet tested and calibrated
• Compatible with all interfaces like slurry monitor, Isobus etc
• Heavy duty steel body construction and flanges
• Also available in 4”, 5” & 8” bore sizes

Learn More

4" SLURRYKAT CLOSURE RING Learn More

2" PRESSURE RELIEF VALVE 089025009011 Learn More

100MM OVERFLOW VALVE SEAT POS 7 - RIV 415 GUTPTSF00064 Learn More

JUROP PN130-140-155 MANIFOLD 16275007E0 Learn More

JUROP PN155 M GEARBOX COVER 164059V5B0 Learn More

JUROP PN155 M 1000RPM PINION Z37 165109KFB0 Learn More

JUROP PN155 M 1000RPM GEAR Z41 165109KGB0 Learn More

JUROP PN130-140-155 SELF LOCKING NUT M36X3 4026306115 Learn More

JUROP GASKET KIT PN155 M 18920CZRB0 Learn More

STEM AND SCREWED RING FOR 4" EXPORT BALL VALVE RIV 5550 / CW614 Learn More

PERLA SERIES 4" CAP - RIV 9822 TESS31091016 Learn More

GASKET FOR 4" PERLA CAP - RIV 9834 GUSS680D0016 Learn More

Flowmeter c/w DD Slurry Monitor (Kit includes flow meter, in cab display, wiring harness & speed input lead)

• Comes with compact in cab hand set display
• Speed input lead for forward ground speed from the tractors CANBUS (dash)
• Compatible with Umbilical Systems & Tankers
• Live application rate
• Total volume recorded
• Indicates the correct driving speed to achieve application rates
• RTK data
• Jobs saved
• Individual fields saved
• USB port for downloading data
• Clean waterproof display that can be wiped clean
• Units in UK Gallons or Cubic Meters
• Can be used with GPS speed sensor

Learn More

• 12 Volt, comes with short loom and plug
• All flowmeters are wet tested and calibrated
• Compatible with all interfaces like slurry monitor, Isobus etc
• Heavy duty steel body construction and flanges
• Also available in 4”, 5” & 8” bore sizes

Learn More

• Record keeping per field
• Live flow rate
• Live application rate
• Target forward speed advised
• Saves space in cab
• Hydraulic control (optional) all on same screen
• Rate control with regulation valve or forward speed adjustment (depending on tractor)
• Umbilical or Tanker compatible
• Units displayed in Cubic meters (m3) or imperial gallons

Learn More

4" CASING GLADIO PAIR TO SUIT 4" GLADIO GATE VALVE SOLD AS A PAIR Learn More

5" BLACK CASING GLADIO PAIR TO SUIT 5" GLADIO GATE VALVE SOLD AS A PAIR Learn More

FLANGE GASKET TO SUIT MEC, GARDA Learn More

MEC GEARBOX COVER GASKET Learn More

HANDLE BALLAST 16000 Learn More

KEY C45K 8X7X30 UNI6604 NEEDED FOR GRU112- REPLACES BUL6067 FOR THIS SHAFT Learn More

ALRENA V42 WEARPLATE SCREEN - LOWER FLOW - G3 ** ONLY 1 SUPPLIED** ** 2 REQUIRED PER MACERATOR** Learn More

ALRENA V42 WEARPLATE SCREEN - G2 ** ONLY 1 SUPPLIED ** **2 REQUIRED PER MACERATOR** Learn More

• Record keeping per field
• Live flow rate
• Live application rate
• Target forward speed advised
• Saves space in cab
• Hydraulic control (optional) all on same screen
• Rate control with regulation valve or forward speed adjustment (depending on tractor)
• Umbilical or Tanker compatible
• Units displayed in Cubic meters (m3) or imperial gallons

Learn More

• Record keeping per field
• Live flow rate
• Live application rate
• Target forward speed advised
• Saves space in cab
• Hydraulic control (optional) all on same screen
• Rate control with regulation valve or forward speed adjustment (depending on tractor)
• Umbilical or Tanker compatible
• Units displayed in Cubic meters (m3) or imperial gallons

Learn More

BATTIONI AUTOMATIC OIL PUMP KEY MEC/M Series ###EMAIL FOR LEAD TIME ### Learn More

COVER FOR AFI MONOLITHIC WIDIA SEAL (HOLDER) * MUST BE USED WITH 2024 MONOLOTHIC SEAL KIT * PUMPS PRE 2024 MUST UPGRADE TO THIS WIDIA SEAL WHEN ORDERING 2024 MONOLOTHIC SEAL KIT Learn More

NEW 2024 MONOLITHIC AFI MECHANICAL SEAL SET WITHOUT HOLDER KIT CONTAINS: 1 X GTP125M 1 X GTP126 * MUST BE USED WITH COVER FOR AFI MONOLITHIC WIDIA SEAL 0608034 (HOLDER) Learn More

JUROP PN155R HYDRAULIC CW MAN.D AUTO AIR INJECTION Learn More

JUROP PN155R DIRECT DRIVE AIR INJECTION SPLINED SHAFT CCW ROTATION MANUAL 4-WAY VALVE *NO GEARBOX Learn More

JUROP PN155R M -1000RPM - 15500L AIR INJECTION SH. CCW W/O MAN SPLINED SHAFT CCW ROTATION C/W GEARBOX Learn More

SLURRYKAT 4" AND 5" COUPLING PIN Learn More

100MM OVERFLOW 120MM DIA STAINLESS STEEL INTERNAL BALL Learn More

4" SLURRYKAT MALE TO 5" SLURRYKAT FEMALE COUPLING ADAPTOR Learn More

5" SLURRYKAT MALE TO 4" SLURRYKAT FEMALE COUPLING ADAPTOR Learn More

BATTIONI RUBBER FLOAT BALL 70MM WOULD SUIT MEC 8000 Learn More

VOGELSANG EXACUT 42-40 FLAT GASKET - ECQ DFD0452 Learn More

AFI HD35 GLV CONE COVER *SEAL NOT INCLUDED Learn More

HYDRAULIC PRIMER BRACKET *BRACKET ONLY Learn More

VACUUM PRIMER BODY COVER PULLEY SIDE *BOLTS AND WASHERS NOT INCLUDED Learn More

LAY SHAFT AFI IV GEAR BOX *3240 ONLY Learn More

INPUT PINION SHAFT *3242 ONLY *NON - SPLINED. PLEASE CHECK CURRENT SHAFT BEFORE ORDERING Learn More

IV OUTPUT PINION SHAFT R.1:1.19 - Z=21 TEETH *SHAFT GRU112M ONLY Learn More

JUROP PN140 PUMP DIRECT DRIVE SPLINED SHAFT 14000L *VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED *NO GEARBOX *PLEASE CONTACT US TO ENQUIRE AVAILABILITY ON THIS PUMP LEAD TIME WILL THEN BE GIVEN Learn More

JUROP GASKET KIT R/PN45-58-84-106 G.BOX Parts included in this kit 1892000000: 2 X 4022200110 SEAL RING 72X48X15 NBR 1 X 4022200030 SEAL RING 41X27X10 DIN 3760-NBR 1 X 4022200040 SEAL RING 72X40X10 DIN 3760-NBR 2 X 4022200240 O-RING 4825 2 X 4022200250 O-RING 6287 1 X 1680700000 FRONT BOX GASKET 1 X 1680700200 LID GASKET 1 X 1680700300 OIL TANK LID GASKET 1 X 1680707500 OIL TANK LID GASKET 1 X 1680708900 GASKET M1000rpm 1 X 1680600100 TOP MANIFOLD GASKET Learn More

JUROP GASKET KIT PN130-140 /SL Parts included in this kit 1892005300: 1 x 1680614300 MANIFOLD GASKET PN 140 1 x 1680614100 GEARBOX MANIFOLD 2 x 1680610200 TOP MANIFOLD GASKET 1 x 1680610500 FLANGE GASKET 1 x 1680609700 OIL PUMP GASKET 1 x 16807011E0 CLAPET GASKET 1 x 1680707300 FRONT FLANGE GASKET 1 x 1680707800 CAP GASKET 2 x 4022200323 O-RING 4850 VITON (COL.VERDE) 2 x 4022200113 SEAL RING 70X55X15 VITON 1 x 4022200040 SEAL RING 72X40X10 DIN 3760-NBR 1 x 4022200011 SEAL RING 64X80X8 DIN 3760-NBR 1 x 4022200030 SEAL RING 41X27X10 DIN 3760-NBR 1 x 4022200044 SEAL RING 65X45X8 DIN 3760-NBR Learn More

REVERSE BLADE SUPPORT INCLUDES BRONZE BUSH *NUTS, BOLTS AND WASHERS NOT INCLUDED *FOR NON SPLINED SHAFT Learn More

HD35 GEARBOX HOUSING (E4241) *3-4 week delivery leadtime Learn More

BOLT M1/2" X 10 (E4241) *BOLT ONLY Learn More

VOGELSANG FLAT GASKET EXACUT 4MM DFD0416 Learn More

VOGELSANG CUTTING RING - 30-40 ECQ TML0136 Learn More

VOGELSANG BLADE HOLDER 80 ECL 24 40 TMH0021 Learn More

JUROP 3/8" DRAIN PLUG 1684000000 Learn More

AFI GEARBOX SUPPORT L27/L35 3034 Learn More

AFI SUCTION CONE VALVE ASSEMBLY CAT FLAP *GTP135 - NOT INCLUDED Learn More

JUROP OIL TANK REPLACEMENT KIT .PN140-155-160SL Learn More

HD INPUT SHAFT 1" 3/4 Z=20 *shaft only Learn More

HD GEARBOX BOTTOM COVER (E4241) *COVER ONLY Learn More

PEDESTAL HOUSING *HOUSING ONLY Learn More