Search results for 'afi gear box support kit hd'

This kit includes the following: 1 x GRU131 Crown Gear Z - 21 (Teeth) 1 x GRU133 Crown Gear Z - 42 (Teeth) 1 x GRU121 Crown Gear Z - 50 (Teeth) * LEAD TIME APPROX 2-3 WEEKS FROM ORDER Learn More

HD Gear Box Oil Plug Learn More

OIL SEAL HOLDER PD SUPPORT MOTOR SIDE Learn More

DRIVE GEAR Z48 PN45-58-84-106M 1651000000 Learn More

REVERSE BLADE SUPPORT HD35 2020 INCULDING BRONZE BUSH *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

HD35 Gear Box Rear Cover Learn More

BATTIONI MEC GEAR 23 TEETH TO SUIT 6500 & 8000L M SERIES PUMP POS 19 AMEC33BP Learn More

GEAR Z 28 PN130M PN140M 1651005500 Learn More

HD35 1:2.73 2020 SPLINED PARTS KIT THIS KIT CONTAINS: 1 X PINION SPLINED SHAFT 1000RPM 1:2.73 Z=19 TEETH - GRU195Z 1 X SELF LOCKING IMPELLER NUT - BUL7000 1 X AFI BLADE SPLINED AND BALANCED - 0608016 1 X REVERSE BLADE SUPPORT C/W BRONZE BUSH - 0608019 2 x AFI REVERSE BLADE - 1502 Learn More

MEC 5000 GEAR C/W SHAFT 55T POS 10 AM26BP Learn More

AFI GEARBOX SUPPORT L27/L35 3034 Learn More

CROWN GEAR - AFI L35 1000RPM 1:2,38 Z = 50 (TEETH) Learn More

MEC 5000 GEAR 21 TEETH POS 19 AM33BP Learn More

This kit includes the following: 1 x GRU130 Crown Gear Z - 29 (TEETH) 1 x GRU132 Crown Gear Z - 43 (TEETH) 1 x GRU121 Crown Gear Z - 50 (TEETH) Learn More

HD35 CROWN GEAR 824RPM R.1:3.31 Z=53 TEETH Learn More

INPUT PINION SHAFT AFI IV GEAR BOX FOR SPLINED SHAFT Z12 *3242B ONLY *SPLINED. PLEASE CHECK CURRENT SHAFT BEFORE ORDERING *LEAD TIME FOR THIS PART IS 3-4 WEEKS Learn More

PINION GEAR Z19 PN45-58-84-106 M 1651000100 Learn More

MEC 1000RPM GEAR C/W SHAFT 33T POS 22 Learn More

JUROP GEAR Z 70 540RPM PN130M AND PN140M - POS 21 1651010500 Learn More

LAY SHAFT AFI IV GEAR BOX *3240 ONLY Learn More

JUROP PN155 M 1000RPM GEAR Z41 165109KGB0 Learn More

MEC 65/8000 GEAR C/W SHAFT 53T POS 10 Learn More

CROWN GEAR - AFI L27 1000RPM 1:3,35 Z = 64 (TEETH) Learn More

REVERSE BLADE SUPPORT INCLUDES BRONZE BUSH *NUTS, BOLTS AND WASHERS NOT INCLUDED *FOR NON SPLINED SHAFT Learn More

MEC 1000RPM GEAR C/ SHAFT 43 TEETH POS 9 TO SUIT 9000L, 11,000L AND 13,500L M SERIES PUMP 4020507012BP Learn More

JUROP OILER SUPPORT PN140 1681100200 Learn More

HD35 GEARBOX SUPPORT Learn More

HD35 CROWN GEAR 1000RPM R.1:2.73 Z=52 TEETH Learn More

JUROP PN140 PUMP DIRECT DRIVE SPLINED SHAFT 14000L *VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED *NO GEARBOX *PLEASE CONTACT US TO ENQUIRE AVAILABILITY ON THIS PUMP LEAD TIME WILL THEN BE GIVEN Learn More

SEAL KIT TO SUIT: KM40.73 Learn More

This kit contains the following parts :

• 1 x Oil Seal 50.72.10- Doda Part Number GTP139
• 1 x Taper Roller Bearing 31310 - Doda Part Number CUS118
• 1 x Shim 95x110MM - Doda Part Number BUL7593
• 1 x Bearing 3307- Doda Part Number CUS175
• 1 x Shim 65x77 T.04MM - Doda Part Number GRU241
• 1 x Shim 65x77 T.03MM - Doda Part Number GRU242

Learn More

AFI L27-L35 Gearbox Housing Learn More

GEARBOX DRIVE END PLATE PN45-58-84-106 M 1610500000 Learn More

HEAVY DUTY HANDLE KIT FOR 6" BRASS VALVE (8" HANDLE KIT ALSO AVAILABLE) Learn More

SELF LOCKING IMPELLER NUT HD35 2020 *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

ALRENA V36 WEARPLATE SCREEN - G5 * ONLY 1 SUPPLIED * 2 REQUIRED PER MACERATOR Learn More

HD INPUT SHAFT 1" 3/4 Z=20 *shaft only Learn More

NEW 2024 MONOLITHIC AFI MECHANICAL SEAL KIT
3 PIECE
GTP125M, GTP126 & 0608034

Learn More

This kit contains the following parts:

• 1 x Oil Seal - Doda Part Number GTP217
• 1 x Bearing - Doda Part Number CUS201
• 1 x AFI GEARBOX SHIMS DIA. 85 X 100 (0.3/0.4/0.5) BUL7574
• 1 x Bearing - Doda Part Number CUS163

Learn More

AFI L27 Pump Body Housing Widia Learn More

HD35 Doda IV Pump R.1:1,19 c/w oil cooler, without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 180HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 5-6 WEEKS Learn More

BATTIONI MEC 9000 REBUILD KIT - RED LINE 6010201080BP KIT CONTAINS: VANES SEALS O-RINGS BOLTS AND WASHERS Learn More

AFI IV GEARBOX COVER - 3 INLET SIDE Learn More

JUROP PN155 PUMP DIRECT DRIVE SPLINED SHAFT *VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED *NO GEARBOX *PLEASE CONTACT US TO ENQUIRE AVAILABILITY ON THIS PUMP LEAD TIME WILL THEN BE GIVEN Learn More

JUROP GASKET KIT PN155 M 18920CZRB0 Learn More

This item contains the following part :

• 1 x AFI L27 Reverse Impeller - Doda Part Number 2977

 

Learn More

O Ring AFI L27 Learn More

Oil Filter Assembly for HD Pumps Learn More

MEC 5000/65/8000L GEARBOX COVER POS 14 AM29BP Learn More

HYDRAULIC HOSE KIT FOR HERTELL PRIMER PUMP Learn More

JUROP OIL TANK REPLACEMENT KIT .PN140-155-160SL Learn More

HD35 COMPLETE GEARBOX R.1.2.73 C/W SPLINED SHAFT C/W WITH OIL PUMP IDR220SX ONLY *3-4 week delivery leadtime Learn More

Stator AFI Vacuum Pump - Cast Iron Learn More

HD35 Doda Pump R.1:3,31 without primer c/w Splined Shaft & Chopper System • Max Output pressure – 17bar • Max Flow Rate – 396m3/hour • PTO input speed – 1000RPM • Auto priming • Oil Cooling System • 200HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

AFI HD35 GLV CONE COVER *SEAL NOT INCLUDED Learn More

JUROP PN155 M GEARBOX COVER 164059V5B0 Learn More

This item contains the following part :

• 1 x AFI HD Cone Body - Doda Part Number 4235

Learn More

AFI HD35 Cone Seal 3MM Learn More

Jurop PN140M Vacuum Pump 14000LT 540 RPM Gearbox C/W EXHAUST MANIFOLD AND SUCTION MANIFOLD * VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED Learn More

Rubber Gasket Afi Outlet 190 x 120 Learn More

AFI BLADE SPLINED AND BALANCED *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

BLUE HARDENED HIGH ABRASION RESISTANT DODA AFI HD35 & L35 IMPELLER HARD WEARING IMPELLER FOR SAND PUMPING AND HIGH ABRASION APPLICATIONS ### EMAIL FOR LEAD TIME ### Learn More

AFI REVERSE BLADE 1 X BLADE *2 REQUIRED PER PUMP (FIXINGS NOT INCLUDED) Learn More

This kit contains the following parts :

• 1 x Cover for A7D Gearbox - Doda Part Number GRU176
• 8 x VSP Bolt M8x20 - Doda Part Number BUL5601
• 8 x M8 Washer - Doda Part Number BUL8201
• 1 x Plug Drain - Doda Part Number RAC100
GTP141 is no longer provided. Please use silicon gel instead

Learn More

This kit includes the following: 1 x O Ring PD version - GTP131 1 x Oil Seal Holder PD Impeller Side - 3026 2 x Oil Seal 45.60.10 - GTP130 1 x BEARING SKF 31309 J2/QCL7C (30309DJ) - CUS114 1 x Bearing 6209 - CUS115 1 x Shim 65 x 85 - BUL7557 Learn More

GEARBOX COVER PN45-58-84-106 M 1612503100 Learn More

JUROP GEARBOX FLANGE PN130M PN140M 1610512700 Learn More

JUROP JOINT PN 130 HDR - POS 6 PN 140 HDR - POS 6 1470102300 Learn More

HD35 GEARBOX HOUSING (E4241) *3-4 week delivery leadtime Learn More

BATTIONI GARDA GEARBOX - 540RPM G1BP 4010301004BP *LEADTIME IS APPROX. 8 WEEKS Learn More

This  item contains the following part :

• 1 x AFI HD35 & Reverse Impeller  - Doda Part Number 3002

Learn More

AFI Blade *NON SPLINED BLADE Learn More

Battioni MEC 13500 Ltr Slurry Pump
540 RPM Gearbox

Availability - 7 to 14 Days

9003800051 Learn More

HD35 Complete Gearbox only R.1:3,31 Complete with oil pump IDR220SX only *3-4 week delivery leadtime Learn More

Garda MEC 11000L Dual Pump System

11000L MEC Vacuum Pump
Centrifugal Pump
Garda Gearbox c/w Change Over Handle

Ideal for rain gun or umbilical applications

Manufacturer Part Number: G7511000

Learn More

SPLINED HYDRAULIC HUB Z=12 CONICAL SHAFT FOR HD HYDRAULIC PUMP Learn More

ALRENA V42 WEARPLATE SCREEN - G5 * ONLY 1 SUPPLIED * 2 REQUIRED PER MACERATOR * NOTE - ONLY FOR USE IN MACERATORS WITH SERIAL PLATES PRE 2023 Learn More

JUROP GASKET KIT R/PN45-58-84-106 G.BOX Parts included in this kit 1892000000: 2 X 4022200110 SEAL RING 72X48X15 NBR 1 X 4022200030 SEAL RING 41X27X10 DIN 3760-NBR 1 X 4022200040 SEAL RING 72X40X10 DIN 3760-NBR 2 X 4022200240 O-RING 4825 2 X 4022200250 O-RING 6287 1 X 1680700000 FRONT BOX GASKET 1 X 1680700200 LID GASKET 1 X 1680700300 OIL TANK LID GASKET 1 X 1680707500 OIL TANK LID GASKET 1 X 1680708900 GASKET M1000rpm 1 X 1680600100 TOP MANIFOLD GASKET Learn More

This kit contains the following parts :

• 1 x Shim 65 x 77 T.0.4 - Doda Part Number GRU241
• 1 x Shim 65x77 T.0.3 - Doda Part Number GRU242
• 1 x Shim 65x80- Doda Part Number BUL7576
• 1 x Bearing 6307- Doda Part Number CUS137
• 1 x CIR Clip - Doda Part Number BUL7313
• 1 x Oil Seal 35.80.10 - Doda Part Number GTP159
• 1 x Bearing 3208 - Doda Part Number CUS142
• 1 x Shim 45x65 - Doda Part Number BUL7567
Learn More

COMPLETE GEARBOX ONLY - L35 R.1:2.38 1000 RPM *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn More

NEW HIGH THICKNESS, HARD WEARING AFI HD35 & L35 PUMP BODY HOUSING WIDIA Learn More

HEAVY DUTY HANDLE KIT FOR 8" BRASS VALVE (6" HANDLE KIT ALSO AVAILABLE) Learn More

JUROP HYDRAULIC MOTOR PN 106 D PN 130 HDR PN 140 HDR 4024107001 Learn More

HD INPUT SHAFT KEY 16 X 10 X 60 *KEY ONLY Learn More