Search results for 'Doda pump housing'

AFI L27 Pump Body Housing Widia Learn More

DODA AFI HD35 & L35 PUMP BODY HOUSING WIDIA BLUE HARDENED HIGH ABRASION RESISTANT HARD WEARING PUMP BODY FOR SAND PUMPING AND HIGH ABRASION APPLICATIONS Learn More

NEW HIGH THICKNESS, HARD WEARING AFI HD35 & L35 PUMP BODY HOUSING WIDIA Learn More

Stator AFI Vacuum Pump - Cast Iron Learn More

HD35 Complete Gearbox only R.1:3,31 Complete with oil pump IDR220SX only *3-4 week delivery leadtime Learn More

HD35 Doda IV Pump R.1:1,6 without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 230HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

HYDRAULIC PUMP RIGHT CC4.2 FOR IV TYPE COOLING SYSTEM POLARIS HYDRAULIC PUMP FOR OIL COOLING - HD35 IV ONLY Learn More

HYDRAULIC HOSE KIT FOR HERTELL PRIMER PUMP Learn More

SPLINED HYDRAULIC HUB Z=12 CONICAL SHAFT FOR HD HYDRAULIC PUMP Learn More

PEDESTAL HOUSING *HOUSING ONLY Learn More

L35 Doda Pedestal Pump without primer ### EMAIL FOR LEAD TIME ON THIS PUMP ### Learn More

PEDESTAL PUMP SHAFT *KEYS NOT INCLUDED. Learn More

VALVE DODA PUMP Learn More

DODA PUMP FRAME COMPLETE WITH LEGS AND PINS BRACKET REQUIRED FOR FITTING L27/L35 PUMP MODELS Learn More

HD35 Doda Pump R.1:3,31 without primer c/w Splined Shaft & Chopper System • Max Output pressure – 17bar • Max Flow Rate – 396m3/hour • PTO input speed – 1000RPM • Auto priming • Oil Cooling System • 200HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

HD35 COMPLETE GEARBOX R.1.2.73 C/W SPLINED SHAFT C/W WITH OIL PUMP IDR220SX ONLY *3-4 week delivery leadtime Learn More

AFI REVERSE BLADE 1 X BLADE *2 REQUIRED PER PUMP (FIXINGS NOT INCLUDED) Learn More

This item contains the following part :

• 1 x L27 Convoyer Housing - Doda Part Number 2976

 

 

Learn More

L27 Doda Pump 1000RPM R.1:3,35 without primer • Max Output pressure – 14.5bar • Max Flow Rate – 200m3/hour • PTO input speed – 1000RPM • Auto priming • 125HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 3-4 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

PULLEY 132 1/A FOR: - 24/5 IV PUMP - L35 IV PUMP *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn More

HD35 Doda IV Pump R.1:1,19 c/w oil cooler, without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 180HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 5-6 WEEKS Learn More

BRACKET FOR DODA FRAME FOR FITTING L27/L35 PUMP MODELS Learn More

This kit includes: 1 x Oil Pump for HD pumps - IDR220SX 2 x Female 3/8" flange - IDR269 Learn More

This item contains the following part:

• 1 x AFI HD35 & L35 Convoyer Housing - Doda Part Number 3001

Learn More

AFI L27-L35 Gearbox Housing Learn More

L35 Doda Pump 1000RPM R.1:2,38 without primer • Max Output pressure – 12bar • Max Flow Rate – 255m3/hour • PTO input speed – 1000RPM • Auto priming • 130HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 2-3 WEEKS Learn More

BELT A37-1/2 FOR VACUUM PRIMER FOR IV PUMP PULLY BELT Learn More

Afi L35 Pump Body c/w Garda Evo13500L Complete with Widia Seal and Blade No Suction Cone GARDA EVO Learn More

HD35 Doda Pump 1:2.73-Z c/w New 2020 Splined Shaft & Chopper System WITHOUT PRIMER • Max Output pressure – 17bar • Max Flow Rate – 350m3/hour • PTO input speed – 1000RPM • Auto priming • Oil Cooling System • 155HP+ required to operate this pump • 2020 New Chopping system and splined shaft *All values are only a guide and may vary differently in each situation *NOTE: REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

HD35 GEARBOX HOUSING (E4241) *3-4 week delivery leadtime Learn More

Jurop PN140M Vacuum Pump 14000LT 540 RPM Gearbox C/W EXHAUST MANIFOLD AND SUCTION MANIFOLD * VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED Learn More

OIL DRIPPER 2 ON PUMP PN45-58-84-106M PN45-58-84-106D 1401200400 Learn More

HD35 2020 PINION SPLINED SHAFT 1000RPM 1:2.73 Z=19 TEETH Learn More

TOP HAT BAUER E2029003 VERSION Learn More

OIL VENT CAP 3/4" Learn More

IV OUTPUT PINION SHAFT R.1:1.19 - Z=21 TEETH *SHAFT GRU112M ONLY Learn More

SHIM 65 X 85 0.1 Learn More

SELF LOCKING IMPELLER NUT Learn More

L27 OUTPUT SHAFT 540 1:4.93 Z=14 TEETH Learn More

Spiraled Hose 25mm c/w Hose Clips Learn More

This suits both 1:1,19 and 1:1,6 gearbox ratios This kit includes: 1 x 31310 Taper Koyo Bearing - CUS118 3 x Bearing 33208/Q - CUS119 1 x Bearing 32307J2 - CUS120 1 x Bearing 33109/Q - CUS121 1 x Oil Seal 50.72.10 - GTP139 1 x Oil Seal 45.60.7- GTP140 Learn More

Hertell Heavy duty high capacity primer pump. - Hydraulic motor - Oil feed droppers - 1" hose connectors * Note - Hydraulic motor hoses and oil bottles not included Learn More

VALVE HOUSING GASKET PN 45-58-84 D PN 45-58-84 M PN106D PN106M 1680600100 Learn More

OIL PUMP PROTECTION PLATE 1642100200 Learn More

HD GEARBOX BOTTOM COVER (E4241) *COVER ONLY Learn More

VACUUM PRIMER OIL RESERVOIR Learn More

This item contains the following part :

• 1 x AFI HD Cone Body - Doda Part Number 4235

Learn More

AFI Blade *NON SPLINED BLADE Learn More

L27/L35 INPUT SHAFT 1" 3/8 Z=6 TEETH Learn More

Brass Rotor For Vacuum Primer & Shaft Learn More

Battioni MEC 13500 Ltr Slurry Pump
540 RPM Gearbox

Availability - 7 to 14 Days

9003800051 Learn More

JUROP PN106 VACUUM PUMP C/W HYDRAULIC DRIVE 11000 LTR * VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED

Learn More

LAY SHAFT AFI IV GEAR BOX *3240 ONLY Learn More

VACUUM PRIMER RESERVOIR GALVANISED Learn More

This kit contains the following parts :

• 1 x Cover for A7D Gearbox - Doda Part Number GRU176
• 8 x VSP Bolt M8x20 - Doda Part Number BUL5601
• 8 x M8 Washer - Doda Part Number BUL8201
• 1 x Plug Drain - Doda Part Number RAC100
GTP141 is no longer provided. Please use silicon gel instead

Learn More

Splash Guard Learn More

Hydraulic Primer Motor Learn More

This kit includes the following: 1 x GRU131 Crown Gear Z - 21 (Teeth) 1 x GRU133 Crown Gear Z - 42 (Teeth) 1 x GRU121 Crown Gear Z - 50 (Teeth) * LEAD TIME APPROX 2-3 WEEKS FROM ORDER Learn More

BALL BEARING DEEP GROOVE 6208 2 USED ON PUMP TO SUIT MEC 5000 - 13500 M SERIES PUMPS 5012107004 POS 9 - 5000, 6500 & 8000 M SERIES PUMPS POS 26 - 9000, 11000 & 13500 M SERIES PUMPS Learn More

SELF LOCKING IMPELLER NUT HD35 2020 *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

HD INPUT SHAFT 1" 3/4 Z=20 *shaft only Learn More

RUBBER FLAPPER (E2031) * RUBBER FLAPPER ONLY, WASHER AND BOLT NOT INCLUDED Learn More

This  item contains the following part :

• 1 x AFI HD35 & Reverse Impeller  - Doda Part Number 3002

Learn More

HD35 CROWN GEAR 1000RPM R.1:2.73 Z=52 TEETH Learn More

COMPLETE GEARBOX ONLY - L35 R.1:2.38 1000 RPM *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn More

Bearing 6205 Learn More

Doda HD35 PTO Shaft 'Shear Bolt Protected' 1 3/4" 20 Spline - 1 3/8" 6 Spline Learn More

BATTIONI MEC 11000 LTR HYDRAULIC VAC PUMP 9363754041 Learn More

OIL SEAL HOLDER PD SUPPORT MOTOR SIDE Learn More

JUROP VANE PN 84 D - POS 5 PN 84 M - POS 5 1601600800 4 REQUIRED ON PUMP Approximate dimensions: 350mm x 60mm x 8mm Learn More

BLUE HARDENED HIGH ABRASION RESISTANT DODA AFI HD35 & L35 IMPELLER HARD WEARING IMPELLER FOR SAND PUMPING AND HIGH ABRASION APPLICATIONS ### EMAIL FOR LEAD TIME ### Learn More

HYDRAULIC PRIMER BRACKET *BRACKET ONLY Learn More

This kit contains the following parts :

• 1 x Shim 65 x 77 T.0.4 - Doda Part Number GRU241
• 1 x Shim 65x77 T.0.3 - Doda Part Number GRU242
• 1 x Shim 65x80- Doda Part Number BUL7576
• 1 x Bearing 6307- Doda Part Number CUS137
• 1 x CIR Clip - Doda Part Number BUL7313
• 1 x Oil Seal 35.80.10 - Doda Part Number GTP159
• 1 x Bearing 3208 - Doda Part Number CUS142
• 1 x Shim 45x65 - Doda Part Number BUL7567
Learn More

AFI HD35 Cone Liner 0606001 Learn More

Bearing 6003 Learn More

Oil Filter Assembly for HD Pumps Learn More

Rubber Gasket Afi Outlet 190 x 120 Learn More

REVERSE BLADE SUPPORT HD35 2020 INCULDING BRONZE BUSH *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

HD35/L35 WELD ON FLANGE OUTLET Learn More

JUROP PN140 PUMP DIRECT DRIVE SPLINED SHAFT 14000L *VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED *NO GEARBOX *PLEASE CONTACT US TO ENQUIRE AVAILABILITY ON THIS PUMP LEAD TIME WILL THEN BE GIVEN Learn More

This kit contains the following parts :

• 1 x Oil Seal  - Doda Part Number GTP257
• 1 x Bearing  - Doda Part Number CUS170
• 1 x Bearing  - Doda Part Number CUS162
• 1 x SHIMS 70 X 85 - 0.3/0.4/0.5; - Doda Part Number BUL7573
• 1 x Cir Clip - Doda Part Number BUL7316
• 1 x Oil Seal  - Doda Part Number GTP247

Learn More

HD Gear Box Oil Plug Learn More

Rear Cover AFI L27-L35 Gearbox Learn More

CROWN GEAR - AFI L27 1000RPM 1:3,35 Z = 64 (TEETH) Learn More