Search results for 'L35 IV Bearing & Seal Kit'
-
L35 Doda Pump 1000RPM R.1:2.38
L35 Doda Pump 1000RPM R.1:2,38 without primer • Max Output pressure – 12bar • Max Flow Rate – 255m3/hour • PTO input speed – 1000RPM • Auto priming • 130HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 2-3 WEEKS Learn MorePrice: £4,569.91 excl VAT -
BATTIONI MEC 13500 REBUILD KIT - RED LINE
BATTIONI MEC 13500 REBUILD KIT - RED LINE 601020108BP KIT CONTAINS: VANES SEALS O-RINGS BOLTS AND WASHERS Learn MorePrice: £259.58 excl VAT -
RIV DRAINBALL VALVE M X HOSE CONN. -3/4 BSP-25MM SPIGOT
RIV DRAINBALL VALVE M X HOSE CONN. -3/4 BSP-25MM SPIGOT Learn MorePrice: £15.99 excl VAT -
8MM ROUND STEEL FLANGE TO SUIT 4" SWIVEL JOINT
8MM ROUND STEEL FLANGE TO SUIT 4" SWIVEL JOINT Learn MorePrice: £20.82 excl VAT -
PULLEY PD/IV PRIMER 132 1/A
PULLEY 132 1/A FOR: - 24/5 IV PUMP - L35 IV PUMP *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn MorePrice: £114.57 excl VAT -
INPUT PINION SHAFT AFI IV GEAR BOX FOR SPLINED SHAFT Z12
INPUT PINION SHAFT AFI IV GEAR BOX FOR SPLINED SHAFT Z12 *3242B ONLY *SPLINED. PLEASE CHECK CURRENT SHAFT BEFORE ORDERING *LEAD TIME FOR THIS PART IS 3-4 WEEKS Learn MorePrice: £340.52 excl VAT -
L27-L35 Cone Kit
This kit contains the following parts :
- 1 x 4" Rubber O-Ring - Doda Part Number GTP213
- 1 x Bauer Cone for Afi Pumps; Doda Part Number 3182
- 1 x 6" Rubber O-Ring - Doda Part Number GTP214
Price: £445.33 excl VAT -
Doda L27/L35 PTO Shaft 'Shear Bolt Protected'
Doda L27/35 PTO Shaft - T 'Shear Bolt Protected' 1 3/8" 6 Spline x 1 3/8" 6 Spline Learn MorePrice: £206.34 excl VAT -
BATTIONI GEARBOX COVER 9000 -13500 M
BATTIONI GEARBOX COVER 9000 -13500 M TO SUIT MEC 9000, 11000 & 13500 M SERIES PUMPS POS 19 4010601154BP Learn MorePrice: £222.52 excl VAT -
BATTIONI MEC GEAR 23 TEETH
BATTIONI MEC GEAR 23 TEETH TO SUIT 6500 & 8000L M SERIES PUMP POS 19 AMEC33BP Learn MorePrice: £54.93 excl VAT -
4" GLADIO O-RING GASKET FOR FLANGE RIV 9859
4" GLADIO O-RING GASKET FOR FLANGE RIV 9859 Learn MorePrice: £4.41 excl VAT -
HEAVY DUTY HANDLE KIT FOR 8" BRASS VALVE
HEAVY DUTY HANDLE KIT FOR 8" BRASS VALVE (6" HANDLE KIT ALSO AVAILABLE) Learn MorePrice: £43.05 excl VAT -
6" GLADIO SEAT GASKET RIV 9847
6" GLADIO SEAT GASKET RIV 9847 FITS NEW TYPE AND OLD TYPE GLADIO Learn MorePrice: £18.43 excl VAT -
4" SWIVEL JOINT O RING
4" SWIVEL JOINT O RING Learn MorePrice: £2.31 excl VAT -
JUROP PN155 PUMP DIRECT DRIVE SPLINED SHAFT
JUROP PN155 PUMP DIRECT DRIVE SPLINED SHAFT *VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED *NO GEARBOX *PLEASE CONTACT US TO ENQUIRE AVAILABILITY ON THIS PUMP LEAD TIME WILL THEN BE GIVEN Learn MorePrice: £2,295.75 excl VAT -
5" GLADIO KNIFE GATE VALVE
5" GLADIO KNIFE GATE VALVE Learn MorePrice: £542.91 excl VAT -
HD35 & L35 Reverse Impeller
This item contains the following part :
- 1 x AFI HD35 & Reverse Impeller - Doda Part Number 3002
Price: £236.58 excl VAT -
AFI L27-L35 Gearbox Housing
AFI L27-L35 Gearbox Housing Learn MorePrice: £804.94 excl VAT -
HD35 Doda Pump 1:2.73-Z c/w New 2020 Splined Shaft & Chopper System
HD35 Doda Pump 1:2.73-Z c/w New 2020 Splined Shaft & Chopper System WITHOUT PRIMER • Max Output pressure – 17bar • Max Flow Rate – 350m3/hour • PTO input speed – 1000RPM • Auto priming • Oil Cooling System • 155HP+ required to operate this pump • 2020 New Chopping system and splined shaft *All values are only a guide and may vary differently in each situation *NOTE: REFER TO MANUFACTURERS MANUAL BEFORE USE Learn MorePrice: £7,336.00 excl VAT -
OIL PUMP DRIVE FOR JUROP
OIL PUMP DRIVE PN22-33 - 45-58-84 -106 -130-140-155D PN23-33 - 45-58-84-106-130-140-155 M 1622002600 Learn MorePrice: £5.15 excl VAT -
BATTIONI MEC 9000 REBUILD KIT - RED LINE
BATTIONI MEC 9000 REBUILD KIT - RED LINE 6010201080BP KIT CONTAINS: VANES SEALS O-RINGS BOLTS AND WASHERS Learn MorePrice: £131.39 excl VAT -
KNOB FOR 5" SIGHT GLASS
KNOB FOR 5" SIGHT GLASS RIV 9925 *COLOURS MAY VARY Learn MorePrice: £4.94 excl VAT -
BELT A37-1/2 FOR VACUUM PRIMER FOR IV PUMP
BELT A37-1/2 FOR VACUUM PRIMER FOR IV PUMP PULLY BELT Learn MorePrice: £17.54 excl VAT -
SIGHT GLASS STEEL DISC
SIGHT GLASS STEEL DISC Learn MorePrice: £3.76 excl VAT -
100MM OVERFLOW VALVE SEAT POS 7 - RIV 415
100MM OVERFLOW VALVE SEAT POS 7 - RIV 415 GUTPTSF00064 Learn MorePrice: £6.35 excl VAT -
4" Swivel Joint
4" Swivel Joint 25cm x 25cm x 12.7cm height *COLOURS MAY VARY Learn MorePrice: £197.40 excl VAT -
RIV 3/4" EXPORT BALL VALVE M/F PN25
RIV 3/4" EXPORT BALL VALVE M/F PN25 Learn MorePrice: £9.20 excl VAT -
6" GLADIO O-RING GASKET FOR FLANGE RIV 9859
6" GLADIO O-RING GASKET FOR FLANGE RIV 9859 Learn MorePrice: £4.28 excl VAT -
LAY SHAFT AFI IV GEAR BOX
LAY SHAFT AFI IV GEAR BOX *3240 ONLY Learn MorePrice: £204.12 excl VAT -
RIV 5550 DN100 BLUE FLANGED LEVER VALVE - SEAT/PTFE
RIV 5550 DN100 BLUE FLANGED LEVER VALVE SEAT/PTFE RICAMBGENER Learn MorePrice: £46.26 excl VAT -
L35 1:2.38 & IV 1:1.6 OUTPUT SHAFT Z=21 TEETH
OUTPUT SHAFT Z=21 TEETH L35 1:2.38 IV 1:1.6 Learn MorePrice: £994.98 excl VAT -
UNIV CONNECTION DIR 6X1/8
UNIV CONNECTION DIR 6X1/8 PN45-58-84-106M - POS 48 4026702004 Learn MorePrice: £2.21 excl VAT -
RIV 8" GLADIO KNIFE GATE VALVE
8" GLADIO KNIFE GATE VALVE Learn MorePrice: £680.32 excl VAT -
HARDENED AFI HD35 & L35 PUMP BODY HOUSING WIDIA
DODA AFI HD35 & L35 PUMP BODY HOUSING WIDIA BLUE HARDENED HIGH ABRASION RESISTANT HARD WEARING PUMP BODY FOR SAND PUMPING AND HIGH ABRASION APPLICATIONS Learn MorePrice: £1,205.82 excl VAT -
PERLA SERIES 4" CAP - RIV 9822
PERLA SERIES 4" CAP - RIV 9822 TESS31091016 Learn MorePrice: £45.62 excl VAT -
RIV 4" Export Ball Valve F/F Steel Lever Handle PN16 bar
4" Export Ball Valve F/F Steel Lever Handle PN16 bar Learn MorePrice: £211.45 excl VAT -
HD35 Doda IV Pump R.1:1.6
HD35 Doda IV Pump R.1:1,6 without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 230HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn MorePrice: £8,219.00 excl VAT -
JUROP PN106 VACUUM PUMP C/W HYDRAULIC DRIVE 11000 LTR
JUROP PN106 VACUUM PUMP C/W HYDRAULIC DRIVE 11000 LTR * VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED
Learn MorePrice: £2,592.75 excl VAT -
RIV 1/4" X 60 MANOVACUUM METER
RIV 1/4" X 60 MANOVACUUM METER Learn MorePrice: £9.45 excl VAT -
RIV PERSPEX BOWL FOR SIPHON
RIV PERSPEX BOWL FOR SIPHON APPRIX DIMENSIONS: LENGTH = 14CM WIDTH INSIDE TO INSIDE AT SCREW = 18CM Learn More -
HYDRAULIC PUMP RIGHT CC4.2 FOR IV TYPE COOLING SYSTEM
HYDRAULIC PUMP RIGHT CC4.2 FOR IV TYPE COOLING SYSTEM POLARIS HYDRAULIC PUMP FOR OIL COOLING - HD35 IV ONLY Learn MorePrice: £389.81 excl VAT -
HD35 GEARBOX HOUSING (E4241)
HD35 GEARBOX HOUSING (E4241) *3-4 week delivery leadtime Learn MorePrice: £1,612.01 excl VAT -
RIV 5550 DN100 BLUE FLANGED LEVER VALVE - O-RING/NO.8
RIV 5550 DN100 BLUE FLANGED LEVER VALVE - O-RING/NO.8 Learn MorePrice: £11.75 excl VAT -
CROWN GEAR - AFI L35 1000RPM 1:2.38 Z = 50 (TEETH)
CROWN GEAR - AFI L35 1000RPM 1:2,38 Z = 50 (TEETH) Learn MorePrice: £464.89 excl VAT -
L35 Crown Gear Kit R.1:1.19
This kit includes the following: 1 x GRU131 Crown Gear Z - 21 (Teeth) 1 x GRU133 Crown Gear Z - 42 (Teeth) 1 x GRU121 Crown Gear Z - 50 (Teeth) * LEAD TIME APPROX 2-3 WEEKS FROM ORDER Learn MorePrice: £1,375.24 excl VAT -
5" SIGHT GLASS - BOWL ONLY
5" SIGHT GLASS - BOWL ONLY Learn MorePrice: £24.57 excl VAT -
8" SWIVEL JOINT
8" SWIVEL JOINT *COLOURS MAY VARY 35cm x 35cm x 12.7cm height Learn MorePrice: £315.33 excl VAT -
60MM RUBBER FLOATING BALL RIV 9912
60MM RUBBER FLOATING BALL RIV 9912 Learn MorePrice: £7.75 excl VAT -
8" SINGLE ACTING HYDRAULIC SPRING JACK RAM
8" SINGLE ACTING HYDRAULIC SPRING JACK RAM Learn MorePrice: £206.65 excl VAT -
STEM AND SCREWED RING FOR 4" EXPORT BALL VALVE
STEM AND SCREWED RING FOR 4" EXPORT BALL VALVE RIV 5550 / CW614 Learn MorePrice: £46.08 excl VAT -
AFI L27 Reverse Impeller
This item contains the following part :
- 1 x AFI L27 Reverse Impeller - Doda Part Number 2977
Learn MorePrice: £235.11 excl VAT -
1 1/2" Vacuum Relief Valve
1 1/2" Vacuum Relief Valve * PRESET TO -0.9 BAR Learn MorePrice: £28.97 excl VAT -
L35 Doda Pedestal Pump
L35 Doda Pedestal Pump without primer ### EMAIL FOR LEAD TIME ON THIS PUMP ### Learn MorePrice: £4,502.05 excl VAT -
100MM OVERFLOW VALVE WITH DOUBLE BALL & SIGHT GLASS
100MM OVERFLOW VALVE WITH DOUBLE BALL & SIGHT GLASS Learn MorePrice: £307.86 excl VAT -
100MM RUBBER FLOATING BALL
100MM RUBBER FLOATING BALL RIV 9912 Learn MorePrice: £18.40 excl VAT -
6" RUBBER FLANGE GASKET - 4 BOLT - SQUARE
6" RUBBER FLANGE GASKET 4 BOLT SQUARE Learn MorePrice: £3.68 excl VAT -
8MM ROUND STEEL FLANGE TO SUIT 6" SWIVEL JOINT
8MM ROUND STEEL FLANGE TO SUIT 6" SWIVEL JOINT Learn MorePrice: £24.03 excl VAT -
AFI GEARBOX SUPPORT L27/L35
AFI GEARBOX SUPPORT L27/L35 3034 Learn MorePrice: £198.75 excl VAT -
DODA PUMP FRAME
DODA PUMP FRAME COMPLETE WITH LEGS AND PINS BRACKET REQUIRED FOR FITTING L27/L35 PUMP MODELS Learn MorePrice: £721.88 excl VAT -
O Ring AFI L35/HD35
O Ring AFI L35/HD35 Learn MorePrice: £9.01 excl VAT -
JUROP DRIVE GEAR Z48
DRIVE GEAR Z48 PN45-58-84-106M 1651000000 Learn MorePrice: £205.80 excl VAT -
BATTIONI MEC LOCK NUT M27X2
BATTIONI MEC LOCK NUT M27X2 TO SUIT MEC 6500 & 8000M SERIES PUMPS POS 18 AME32BP 5050300002BP Learn MorePrice: £3.53 excl VAT -
RIV 4" GLADIO KNIFE GATE VALVE
RIV 4" GLADIO KNIFE GATE VALVE Learn MorePrice: £496.26 excl VAT -
4" GLADIO SCREWED LOCKING RING - NEW SERIES - RIV 9848
4" GLADIO SCREWED LOCKING RING - NEW SERIES RIV 9848 Learn MorePrice: £63.59 excl VAT -
6" SWIVEL JOINT O RING
6" SWIVEL JOINT O RING Learn MorePrice: £3.08 excl VAT -
JUROP PN106 PUMP DIRECT DRIVE SPLINED SHAFT 1300RPM 11000L
JUROP PN106 PUMP DIRECT DRIVE SPLINED SHAFT 1300RPM 11000L *VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED *NO GEARBOX *PLEASE CONTACT US TO ENQUIRE AVAILABILITY ON THIS PUMP LEAD TIME WILL THEN BE GIVEN Learn MorePrice: £1,452.00 excl VAT -
5" GLADIO SEAT GASKET RIV 9847
5" GLADIO SEAT GASKET RIV 9847 Learn MorePrice: £21.98 excl VAT -
AFI HD35 & L35 Impeller
This item contains the following part :
- 1 x AFI HD35 & L35 Impeller - Doda Part Number 3003
Price: £317.16 excl VAT -
COMPLETE GEARBOX ONLY - L35 R.1:2.38
COMPLETE GEARBOX ONLY - L35 R.1:2.38 1000 RPM *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn MorePrice: £2,185.09 excl VAT -
HD35 OUTPUT SHAFT 1:3.05 Z=17 TEETH
HD35 OUTPUT SHAFT RATION - 1:3.05 17 TEETH *DELIVERY TIME IS 3-4 WEEKS FOR THIS PART Learn MorePrice: £2,332.89 excl VAT -
HD35 Doda Pump R.1:3.31
HD35 Doda Pump R.1:3,31 without primer c/w Splined Shaft & Chopper System • Max Output pressure – 17bar • Max Flow Rate – 396m3/hour • PTO input speed – 1000RPM • Auto priming • Oil Cooling System • 200HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: REFER TO MANUFACTURERS MANUAL BEFORE USE Learn MorePrice: £8,114.50 excl VAT -
HARD WEARING AFI HD35 & L35 PUMP BODY HOUSING WIDIA
NEW HIGH THICKNESS, HARD WEARING AFI HD35 & L35 PUMP BODY HOUSING WIDIA Learn MorePrice: £891.95 excl VAT -
BATTIONI MEC 11000 REBUILD KIT - RED LINE
BATTIONI MEC 11000 REBUILD KIT - RED LINE 6010201081BP KIT CONTAINS: VANES SEALS O-RINGS BOLTS AND WASHERS Learn MorePrice: £229.69 excl VAT -
RIV DN80 PLASTIC FLOATING BALL
RIV DN80 PLASTIC FLOATING BALL RIV 9911 Learn MorePrice: £12.71 excl VAT -
HD35 1:2.73 2020 SPLINED PARTS KIT
HD35 1:2.73 2020 SPLINED PARTS KIT THIS KIT CONTAINS: 1 X PINION SPLINED SHAFT 1000RPM 1:2.73 Z=19 TEETH - GRU195Z 1 X SELF LOCKING IMPELLER NUT - BUL7000 1 X AFI BLADE SPLINED AND BALANCED - 0608016 1 X REVERSE BLADE SUPPORT C/W BRONZE BUSH - 0608019 2 x AFI REVERSE BLADE - 1502 Learn MorePrice: £2,598.03 excl VAT -
HD35/L35 WELD ON FLANGE OUTLET
HD35/L35 WELD ON FLANGE OUTLET Learn MorePrice: £21.00 excl VAT -
HD35 COMPLETE GEARBOX R.1.2.73 SPLINED SHAFT
HD35 COMPLETE GEARBOX R.1.2.73 C/W SPLINED SHAFT C/W WITH OIL PUMP IDR220SX ONLY *3-4 week delivery leadtime Learn MorePrice: £4,854.15 excl VAT -
2" PRESSURE RELIEF VALVE
2" PRESSURE RELIEF VALVE 089025009011 Learn MorePrice: £66.60 excl VAT -
AFI L27/35 GEARBOX COVER KIT
This kit contains the following parts :
- 1 x Cover for A7D Gearbox - Doda Part Number GRU176
- 8 x VSP Bolt M8x20 - Doda Part Number BUL5601
- 8 x M8 Washer - Doda Part Number BUL8201
- 1 x Plug Drain - Doda Part Number RAC100 GTP141 is no longer provided. Please use silicon gel instead
Price: £185.37 excl VAT -
6" Swivel Joint
6" Swivel Joint 29cm x 29cm x 12.7cm height *COLOURS MAY VARY Learn More -
BATTIONI HOUSING 9000 -13500 M
BATTIONI HOUSING TO SUIT BATTIONI MEC 9000, 11000 & 13500 M SERIES PUMPS POS 7 4010301028BP Learn MorePrice: £257.25 excl VAT -
4" EXPORT BALL FLANGED VALVE-MOUNTING PAD+ HANDLE
RIV 4" EXPORT BALL FLANGED VALVE-MOUNTING PAD+ HANDLE Learn MorePrice: £422.14 excl VAT -
HEAVY DUTY HANDLE KIT FOR 6" BRASS VALVE
HEAVY DUTY HANDLE KIT FOR 6" BRASS VALVE (8" HANDLE KIT ALSO AVAILABLE) Learn MorePrice: £36.89 excl VAT -
8" GLADIO O-RING GASKET FOR FLANGE RIV 9859
8" GLADIO O-RING GASKET FOR FLANGE RIV 9859 Learn MorePrice: £5.51 excl VAT -
BRACKET FOR DODA FRAME FOR FITTING L27/L35 PUMP MODELS
BRACKET FOR DODA FRAME FOR FITTING L27/L35 PUMP MODELS Learn MorePrice: £49.43 excl VAT
Shop By
Shopping Options
- Category
-
- Doda Pumps (66)
- Battioni Pumps (16)
- Jurop Pumps (22)
- Valves & Accessories (66)
- Vogelsang (2)
- BOMECH ALRENA (5)
Secure Checkout
Card payments are processed securely via WorldPay. Most cards are accepted.
