Search results for 'Doda housing'

VACUUM PRIMER OIL RESERVOIR Learn More

This kit contains the following parts :

• 1 x Oil Plug 3/8" - Doda Part Number GRU127
• 1 x Oil Plug Gasket Seal - Doda Part Number GTP246

Learn More

O Ring AFI L27 Learn More

Key 6 x 6 x 25 Learn More

Brass Hose Barb 3/4" x 25mm Learn More

This kit includes the following: 1 x O Ring PD version - GTP131 1 x Oil Seal Holder PD Impeller Side - 3026 2 x Oil Seal 45.60.10 - GTP130 1 x BEARING SKF 31309 J2/QCL7C (30309DJ) - CUS114 1 x Bearing 6209 - CUS115 1 x Shim 65 x 85 - BUL7557 Learn More

HD35 2020 PINION SPLINED SHAFT 1000RPM 1:2.73 Z=19 TEETH Learn More

SPLINED HYDRAULIC HUB Z=12 CONICAL SHAFT FOR HD HYDRAULIC PUMP Learn More

REVERSE BLADE SUPPORT INCLUDES BRONZE BUSH *NUTS, BOLTS AND WASHERS NOT INCLUDED *FOR NON SPLINED SHAFT Learn More

VACUUM PRIMER RESERVOIR GALVANISED Learn More

HD35 CROWN GEAR 824RPM R.1:3.31 Z=53 TEETH Learn More

Doda L27/35 PTO Shaft - T 'Shear Bolt Protected' 1 3/8" 6 Spline x 1 3/8" 6 Spline Learn More

L27 Doda Pump 1000RPM R.1:3,35 without primer • Max Output pressure – 14.5bar • Max Flow Rate – 200m3/hour • PTO input speed – 1000RPM • Auto priming • 125HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 3-4 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

BELT A37-1/2 FOR VACUUM PRIMER FOR IV PUMP PULLY BELT Learn More

AFI GEARBOX SUPPORT L27/L35 3034 Learn More

RUBBER FLAPPER (E2031) * RUBBER FLAPPER ONLY, WASHER AND BOLT NOT INCLUDED Learn More

This kit contains the following parts :

• 1 x Oil Seal 50.72.10- Doda Part Number GTP139
• 1 x Taper Roller Bearing 31310 - Doda Part Number CUS118
• 1 x Shim 95x110MM - Doda Part Number BUL7593
• 1 x Bearing 3307- Doda Part Number CUS175
• 1 x Shim 65x77 T.04MM - Doda Part Number GRU241
• 1 x Shim 65x77 T.03MM - Doda Part Number GRU242

Learn More

AFI HD35 Cone Seal 3MM Learn More

Vacuum Primer Body Cover - Bearing Side Learn More

Galvanised 90 Degree Elbow M/F 3/4" Learn More

This kit includes the following: 1 x GRU130 Crown Gear Z - 29 (TEETH) 1 x GRU132 Crown Gear Z - 43 (TEETH) 1 x GRU121 Crown Gear Z - 50 (TEETH) Learn More

VALVE HOUSING GASKET PN 45-58-84 D PN 45-58-84 M PN106D PN106M 1680600100 Learn More

HD35/L35 WELD ON FLANGE OUTLET Learn More

BOLT M1/2" X 10 (E4241) *BOLT ONLY Learn More

PEDESTAL PUMP SHAFT *KEYS NOT INCLUDED. Learn More

This kit contains the following parts:

• 1 x Oil Seal - Doda Part Number GTP217
• 1 x Bearing - Doda Part Number CUS201
• 1 x AFI GEARBOX SHIMS DIA. 85 X 100 (0.3/0.4/0.5) BUL7574
• 1 x Bearing - Doda Part Number CUS163

Learn More

HD Output Shaft Key Learn More

L27 OUTPUT SHAFT 1:3.35 Z=19 Learn More

HD35 OUTPUT SHAFT RATION - 1:3.05 17 TEETH *DELIVERY TIME IS 3-4 WEEKS FOR THIS PART Learn More

HD35 Doda IV Pump R.1:1,19 c/w oil cooler, without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 180HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 5-6 WEEKS Learn More

SELF LOCKING IMPELLER NUT HD35 2020 *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

ADAPTER FEMALE 3/4" TO MALE 1/2" Learn More

INPUT PINION SHAFT *3242 ONLY *NON - SPLINED. PLEASE CHECK CURRENT SHAFT BEFORE ORDERING Learn More

DODA PUMP FRAME COMPLETE WITH LEGS AND PINS BRACKET REQUIRED FOR FITTING L27/L35 PUMP MODELS Learn More

This item contains the following part :

• 1 x AFI L27 Reverse Impeller - Doda Part Number 2977

 

Learn More

O Ring AFI L35/HD35 Learn More

CROWN GEAR - AFI L35 1000RPM 1:2,38 Z = 50 (TEETH) Learn More

This kit includes: 1 x Oil Pump for HD pumps - IDR220SX 2 x Female 3/8" flange - IDR269 Learn More

BATTIONI HOUSING TO SUIT BATTIONI MEC 9000, 11000 & 13500 M SERIES PUMPS POS 7 4010301028BP Learn More

HYDRAULIC 90° CONNECTION M1/8" RAC211 Learn More

HD INPUT SHAFT KEY 16 X 10 X 60 *KEY ONLY Learn More

HD35 COMPLETE GEARBOX R.1.2.73 C/W SPLINED SHAFT C/W WITH OIL PUMP IDR220SX ONLY *3-4 week delivery leadtime Learn More

SELF LOCKING IMPELLER NUT Learn More

L27 OUTPUT SHAFT 540 1:4.93 Z=14 TEETH Learn More

Stator AFI Vacuum Pump - Cast Iron Learn More

Spiraled Hose 25mm c/w Hose Clips Learn More

L35 Doda Pump 1000RPM R.1:2,38 without primer • Max Output pressure – 12bar • Max Flow Rate – 255m3/hour • PTO input speed – 1000RPM • Auto priming • 130HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 2-3 WEEKS Learn More

REVERSE BLADE SUPPORT HD35 2020 INCULDING BRONZE BUSH *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

BRACKET FOR DODA FRAME FOR FITTING L27/L35 PUMP MODELS Learn More

VACUUM PRIMER BODY COVER PULLEY SIDE *BOLTS AND WASHERS NOT INCLUDED Learn More

HERTELL OIL DRIPPER SAME FOR ALL B MODELS (B-400 TO B-2200) *NOT SUITABLE WITH DODA OIL RESERVOIR GLOBE (PVC111) 01BO822018 Learn More

This item contains the following part :

• 1 x AFI HD Cone Body - Doda Part Number 4235

Learn More

AFI Blade *NON SPLINED BLADE Learn More