Search results for 'Doda'

VACUUM PRIMER BODY COVER PULLEY SIDE *BOLTS AND WASHERS NOT INCLUDED Learn More

AFI REVERSE BLADE 1 X BLADE *2 REQUIRED PER PUMP (FIXINGS NOT INCLUDED) Learn More

This kit contains the following parts :

• 1 x Shim 65 x 77 T.0.4 - Doda Part Number GRU241
• 1 x Shim 65x77 T.0.3 - Doda Part Number GRU242
• 1 x Shim 65x80- Doda Part Number BUL7576
• 1 x Bearing 6307- Doda Part Number CUS137
• 1 x CIR Clip - Doda Part Number BUL7313
• 1 x Oil Seal 35.80.10 - Doda Part Number GTP159
• 1 x Bearing 3208 - Doda Part Number CUS142
• 1 x Shim 45x65 - Doda Part Number BUL7567
Learn More

AFI HD35 Cone Liner 0606001 Learn More

Bearing 6205 Learn More

Doda HD35 PTO Shaft 'Shear Bolt Protected' 1 3/4" 20 Spline - 1 3/8" 6 Spline Learn More

HD35 Complete Gearbox only R.1:3,31 Complete with oil pump IDR220SX only *3-4 week delivery leadtime Learn More

AFI IV GEARBOX COVER - 3 INLET SIDE Learn More

HD OUTPUT SHAFT COVER *bolts etc not included Learn More

NEW 2024 MONOLITHIC AFI MECHANICAL SEAL KIT
3 PIECE
GTP125M, GTP126 & 0608034

Learn More

This kit contains the following parts :

• 1 x Oil Seal  - Doda Part Number GTP257
• 1 x Bearing  - Doda Part Number CUS170
• 1 x Bearing  - Doda Part Number CUS162
• 1 x SHIMS 70 X 85 - 0.3/0.4/0.5; - Doda Part Number BUL7573
• 1 x Cir Clip - Doda Part Number BUL7316
• 1 x Oil Seal  - Doda Part Number GTP247

Learn More

HD Gear Box Oil Plug Learn More

Rear Cover AFI L27-L35 Gearbox Learn More

Bearing 6003 Learn More

This suits both 1:1,19 and 1:1,6 gearbox ratios This kit includes: 1 x 31310 Taper Koyo Bearing - CUS118 3 x Bearing 33208/Q - CUS119 1 x Bearing 32307J2 - CUS120 1 x Bearing 33109/Q - CUS121 1 x Oil Seal 50.72.10 - GTP139 1 x Oil Seal 45.60.7- GTP140 Learn More

AFI BLADE SPLINED AND BALANCED *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

PULLEY 132 1/A FOR: - 24/5 IV PUMP - L35 IV PUMP *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn More

AFI HD35 GLV CONE COVER *SEAL NOT INCLUDED Learn More

L27/L35 RUBBER CONE GASKET SEAL *SEAL ONLY Learn More

INPUT PINION SHAFT AFI IV GEAR BOX FOR SPLINED SHAFT Z12 *3242B ONLY *SPLINED. PLEASE CHECK CURRENT SHAFT BEFORE ORDERING *LEAD TIME FOR THIS PART IS 3-4 WEEKS Learn More

This item contains the following part :

• 1 x AFI L27 Impeller - Doda Part Number 2978

 

Learn More

Sealing Ring for Widia Holder Learn More

CROWN GEAR - AFI L27 1000RPM 1:3,35 Z = 64 (TEETH) Learn More

AFI L27 Pump Body Housing Widia Learn More

HD35 Doda IV Pump R.1:1,6 without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 230HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

HD35 1:2.73 2020 SPLINED PARTS KIT THIS KIT CONTAINS: 1 X PINION SPLINED SHAFT 1000RPM 1:2.73 Z=19 TEETH - GRU195Z 1 X SELF LOCKING IMPELLER NUT - BUL7000 1 X AFI BLADE SPLINED AND BALANCED - 0608016 1 X REVERSE BLADE SUPPORT C/W BRONZE BUSH - 0608019 2 x AFI REVERSE BLADE - 1502 Learn More

AFI SUCTION CONE VALVE ASSEMBLY CAT FLAP *GTP135 - NOT INCLUDED Learn More

KEY C45K 12 X 8 X 70 Learn More

HD35 Gear Box Rear Cover Learn More

OUTPUT SHAFT Z=21 TEETH L35 1:2.38 IV 1:1.6 Learn More

VANE FOR DODA PRIMER 4 REQUIRED ON EACH PRIMER Approximate dimensions: L - 72mm W - 43mm H - 5mm Learn More

This kit includes the following: 1 x GRU131 Crown Gear Z - 21 (Teeth) 1 x GRU133 Crown Gear Z - 42 (Teeth) 1 x GRU121 Crown Gear Z - 50 (Teeth) * LEAD TIME APPROX 2-3 WEEKS FROM ORDER Learn More

OIL SEAL HOLDER PD SUPPORT MOTOR SIDE Learn More

L27 WELD ON FLANGE OUTLET Learn More

HD35 GEARBOX HOUSING (E4241) *3-4 week delivery leadtime Learn More

FILTERING ELEMENT FOR PSC366 COMPLETE FILTER Learn More

This item contains the following part :

• 1 x L27 Convoyer Housing - Doda Part Number 2976

 

 

Learn More

Bronze Bush Learn More

Key 10 x 8 x 45 Learn More

TOP HAT BAUER (PRIMING CAP) CLAMP INCLUDED *TOP HAT CLAMP MAY VARY Learn More

L35 Doda Pedestal Pump without primer Learn More

HD35 GEARBOX SUPPORT Learn More

OIL VENT CAP 3/4" Learn More

IV OUTPUT PINION SHAFT R.1:1.19 - Z=21 TEETH *SHAFT GRU112M ONLY Learn More

HD35 1:3.31 SPLINED OUTPUT SHAFT Z=16 TEETH *NEW SPLINED SHAFT 1:3.31 Learn More

This kit contains the following parts :

• 1 x 4" Rubber O-Ring - Doda Part Number GTP213
• 1 x Bauer Cone for Afi Pumps; Doda Part Number 3182
• 1 x 6" Rubber O-Ring - Doda Part Number GTP214

*note - bauer cone not complete with clamps Learn More

L35 OUTPUT SHAFT 1:3.88 RATIO 17 TEETH Learn More

Dowell Learn More

Oil Filter Assembly for HD Pumps Learn More

Rubber Gasket Afi Outlet 190 x 120 Learn More

AFI IV INLET CAP Learn More