Search results for 'Gear box shims'

CROWN GEAR - AFI L27 1000RPM 1:3,35 Z = 64 (TEETH) Learn More

HD35 Gear Box Rear Cover Learn More

MEC 65/8000 GEAR C/W SHAFT 53T POS 10 Learn More

DRIVE GEAR Z48 PN45-58-84-106M 1651000000 Learn More

JUROP GEAR Z 70 540RPM PN130M AND PN140M - POS 21 1651010500 Learn More

AFI HD35 GEARBOX SHIMS DIA. 85 X 100 (0.3/0.4/0.5) Learn More

This kit contains the following parts :

• 1 x Oil Seal  - Doda Part Number GTP257
• 1 x Bearing  - Doda Part Number CUS170
• 1 x Bearing  - Doda Part Number CUS162
• 1 x SHIMS 70 X 85 - 0.3/0.4/0.5; - Doda Part Number BUL7573
• 1 x Cir Clip - Doda Part Number BUL7316
• 1 x Oil Seal  - Doda Part Number GTP247

Learn More

This kit includes the following: 1 x GRU131 Crown Gear Z - 21 (Teeth) 1 x GRU133 Crown Gear Z - 42 (Teeth) 1 x GRU121 Crown Gear Z - 50 (Teeth) * LEAD TIME APPROX 2-3 WEEKS FROM ORDER Learn More

MEC 1000RPM GEAR C/ SHAFT 43 TEETH POS 9 TO SUIT 9000L, 11,000L AND 13,500L M SERIES PUMP 4020507012BP Learn More

INPUT PINION SHAFT AFI IV GEAR BOX FOR SPLINED SHAFT Z12 *3242B ONLY *SPLINED. PLEASE CHECK CURRENT SHAFT BEFORE ORDERING *LEAD TIME FOR THIS PART IS 3-4 WEEKS Learn More

BATTIONI MEC GEAR 23 TEETH TO SUIT 6500 & 8000L M SERIES PUMP POS 19 AMEC33BP Learn More

HD35 CROWN GEAR 1000RPM R.1:2.73 Z=52 TEETH Learn More

HD Gear Box Oil Plug Learn More

LAY SHAFT AFI IV GEAR BOX *3240 ONLY Learn More

CROWN GEAR - AFI L35 1000RPM 1:2,38 Z = 50 (TEETH) Learn More

PINION GEAR Z19 PN45-58-84-106 M 1651000100 Learn More

This kit includes the following: 1 x GRU130 Crown Gear Z - 29 (TEETH) 1 x GRU132 Crown Gear Z - 43 (TEETH) 1 x GRU121 Crown Gear Z - 50 (TEETH) Learn More

MEC 5000 GEAR C/W SHAFT 55T POS 10 AM26BP Learn More

GEAR Z 28 PN130M PN140M 1651005500 Learn More

This kit contains the following parts:

• 1 x Oil Seal - Doda Part Number GTP217
• 1 x Bearing - Doda Part Number CUS201
• 1 x AFI GEARBOX SHIMS DIA. 85 X 100 (0.3/0.4/0.5) BUL7574
• 1 x Bearing - Doda Part Number CUS163

Learn More

MEC 5000 GEAR 21 TEETH POS 19 AM33BP Learn More

JUROP PN155 M 1000RPM GEAR Z41 165109KGB0 Learn More

HD35 CROWN GEAR 824RPM R.1:3.31 Z=53 TEETH Learn More

MEC 1000RPM GEAR C/W SHAFT 33T POS 22 Learn More

GEARBOX DRIVE END PLATE PN45-58-84-106 M 1610500000 Learn More

5" OROFLEX 20 - 200 METRE LENGTH NO COUPLINGS SUPPLIED Only available in 200m lengths. Price shown is for 1 x 200m box(@ £19.32/metre) Ships 400m per pallet Learn More

JUROP DRIP OILER *PN106 WITH SIDE OIL TANK AND GEARBOX (1000 RPM). PN130, 140 , 155 1401200700 Learn More

This suits both 1:1,19 and 1:1,6 gearbox ratios This kit includes: 1 x 31310 Taper Koyo Bearing - CUS118 3 x Bearing 33208/Q - CUS119 1 x Bearing 32307J2 - CUS120 1 x Bearing 33109/Q - CUS121 1 x Oil Seal 50.72.10 - GTP139 1 x Oil Seal 45.60.7- GTP140 Learn More

HD35 GEARBOX HOUSING (E4241) *3-4 week delivery leadtime Learn More

COMPLETE GEARBOX ONLY L27 R.1:3,35 (E2011) *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn More

AFI GEARBOX SUPPORT L27/L35 3034 Learn More

AFI L27-L35 Gearbox Housing Learn More

HD35 Complete Gearbox only R.1:3,31 Complete with oil pump IDR220SX only *3-4 week delivery leadtime Learn More

JUROP GEARBOX COVER GASKET PN130M PN130D PN140M PN140D 4022200323 Learn More

JUROP GASKET KIT R/PN45-58-84-106 G.BOX Parts included in this kit 1892000000: 2 X 4022200110 SEAL RING 72X48X15 NBR 1 X 4022200030 SEAL RING 41X27X10 DIN 3760-NBR 1 X 4022200040 SEAL RING 72X40X10 DIN 3760-NBR 2 X 4022200240 O-RING 4825 2 X 4022200250 O-RING 6287 1 X 1680700000 FRONT BOX GASKET 1 X 1680700200 LID GASKET 1 X 1680700300 OIL TANK LID GASKET 1 X 1680707500 OIL TANK LID GASKET 1 X 1680708900 GASKET M1000rpm 1 X 1680600100 TOP MANIFOLD GASKET Learn More

Jurop PN106M Vacuum Pump 11000L 540 RPM GEARBOX C/W EXHAUST MANIFOLD AND SUCTION MANIFOLD * VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED Learn More

AFI IV GEARBOX COVER - 3 INLET SIDE Learn More

JUROP PN155 M GEARBOX COVER 164059V5B0 Learn More

HD35 Doda IV Pump R.1:1,6 without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 230HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

JUROP GEARBOX COVER JUROP GEARBOX COVER PN130-140M 1640501200 Learn More

JUROP PN106 PUMP DIRECT DRIVE SPLINED SHAFT 1300RPM 11000L *VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED *NO GEARBOX *PLEASE CONTACT US TO ENQUIRE AVAILABILITY ON THIS PUMP LEAD TIME WILL THEN BE GIVEN Learn More

Battioni MEC 11000 Ltr Slurry Pump
540 RPM Gearbox

Availability - 7 to 14 Days

9003700041 Learn More

BATTIONI MEC MECHANICAL SEAL TO SUIT GARDA 75 PUMP - GEARBOX SECTION WITH MECHANICAL SEAL (POS 27) G98BP Learn More

Garda MEC 11000L Dual Pump System

11000L MEC Vacuum Pump
Centrifugal Pump
Garda Gearbox c/w Change Over Handle

Ideal for rain gun or umbilical applications

Manufacturer Part Number: G7511000

Learn More

BATTIONI GARDA GEARBOX - 540RPM G1BP 4010301004BP *LEADTIME IS APPROX. 8 WEEKS Learn More

L35 Doda Pump 1000RPM R.1:2,38 without primer • Max Output pressure – 12bar • Max Flow Rate – 255m3/hour • PTO input speed – 1000RPM • Auto priming • 130HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 2-3 WEEKS Learn More

MEC 5000/65/8000L GEARBOX COVER POS 14 AM29BP Learn More

4" OROFLEX 20 - 200 METRE LENGTH NO COUPLINGS SUPPLIED Only available in 200m lengths. Price shown is for 1 x 200m box (@ £14.16/metre) ships 400m per pallet Learn More

HD35 COMPLETE GEARBOX R.1.2.73 C/W SPLINED SHAFT C/W WITH OIL PUMP IDR220SX ONLY *3-4 week delivery leadtime Learn More

This kit contains the following parts :

• 1 x Cover for A7D Gearbox - Doda Part Number GRU176
• 8 x VSP Bolt M8x20 - Doda Part Number BUL5601
• 8 x M8 Washer - Doda Part Number BUL8201
• 1 x Plug Drain - Doda Part Number RAC100
GTP141 is no longer provided. Please use silicon gel instead

Learn More

HD GEARBOX BOTTOM COVER (E4241) *COVER ONLY Learn More

COMPLETE GEARBOX ONLY - L35 R.1:2.38 1000 RPM *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn More

BATTIONI GEARBOX COVER 9000 -13500 M TO SUIT MEC 9000, 11000 & 13500 M SERIES PUMPS POS 19 4010601154BP Learn More

JUROP GASKET KIT PN130-140 /SL Parts included in this kit 1892005300: 1 x 1680614300 MANIFOLD GASKET PN 140 1 x 1680614100 GEARBOX MANIFOLD 2 x 1680610200 TOP MANIFOLD GASKET 1 x 1680610500 FLANGE GASKET 1 x 1680609700 OIL PUMP GASKET 1 x 16807011E0 CLAPET GASKET 1 x 1680707300 FRONT FLANGE GASKET 1 x 1680707800 CAP GASKET 2 x 4022200323 O-RING 4850 VITON (COL.VERDE) 2 x 4022200113 SEAL RING 70X55X15 VITON 1 x 4022200040 SEAL RING 72X40X10 DIN 3760-NBR 1 x 4022200011 SEAL RING 64X80X8 DIN 3760-NBR 1 x 4022200030 SEAL RING 41X27X10 DIN 3760-NBR 1 x 4022200044 SEAL RING 65X45X8 DIN 3760-NBR Learn More

Jurop PN140M Vacuum Pump 14000LT 540 RPM Gearbox C/W EXHAUST MANIFOLD AND SUCTION MANIFOLD * VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED Learn More

JUROP OIL DISTRIBUTOR BOX 1608100000 Learn More

Rear Cover AFI L27-L35 Gearbox Learn More

L27 Doda Pump 1000RPM R.1:3,35 without primer • Max Output pressure – 14.5bar • Max Flow Rate – 200m3/hour • PTO input speed – 1000RPM • Auto priming • 125HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 3-4 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

JUROP GEARBOX FLANGE PN130M PN140M 1610512700 Learn More

JUROP PN140 PUMP DIRECT DRIVE SPLINED SHAFT 14000L *VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED *NO GEARBOX *PLEASE CONTACT US TO ENQUIRE AVAILABILITY ON THIS PUMP LEAD TIME WILL THEN BE GIVEN Learn More

Battioni MEC 13500 Ltr Slurry Pump
540 RPM Gearbox

Availability - 7 to 14 Days

9003800051 Learn More

GEARBOX COVER PN45-58-84-106 M 1612503100 Learn More

HD35 GEARBOX SUPPORT Learn More

JUROP PN155 M GEARBOX FLANGE 161059TDB0 Learn More

HD35 Doda IV Pump R.1:1,19 c/w oil cooler, without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 180HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 5-6 WEEKS Learn More