Search results for 'HD35 %26 L35 Pump Body'

COMPLETE GEARBOX ONLY - L35 R.1:2.38 1000 RPM *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn More

This kit includes the following: 1 x GRU131 Crown Gear Z - 21 (Teeth) 1 x GRU133 Crown Gear Z - 42 (Teeth) 1 x GRU121 Crown Gear Z - 50 (Teeth) * LEAD TIME APPROX 2-3 WEEKS FROM ORDER Learn More

AFI GEARBOX SUPPORT L27/L35 3034 Learn More

Doda L27/35 PTO Shaft - T 'Shear Bolt Protected' 1 3/8" 6 Spline x 1 3/8" 6 Spline Learn More

Rear Cover AFI L27-L35 Gearbox Learn More

Oil Filter Assembly for HD Pumps Learn More

BATTIONI OIL SEAL 35.50.7 35507 POS 52 SUITS: MEC 9000, 11000, 13500 M SERIES PUMPS Learn More

This kit contains the following parts :

• 1 x 4" Rubber O-Ring - Doda Part Number GTP213
• 1 x Bauer Cone for Afi Pumps; Doda Part Number 3182
• 1 x 6" Rubber O-Ring - Doda Part Number GTP214

*note - bauer cone not complete with clamps Learn More

L35 OUTPUT SHAFT 1:3.88 RATIO 17 TEETH Learn More

BATTIONI HOUSING TO SUIT BATTIONI MEC 9000, 11000 & 13500 M SERIES PUMPS POS 7 4010301028BP Learn More

BALL BEARING DEEP GROVE 6304 TO SUIT MEC 5000 - 13500 M SERIES PUMPS 5012107006 POS 7 - 5000, 6500 & 8000 M SERIES PUMPS POS 8 - 9000, 11000 & 13500 M SERIES PUMPS Learn More

BATTIONI PTO CONE BOLT ON LARGE 4060505000BP POS 17 SUITS: MEC 9000, 11000, 13500 M SERIES PUMPS Learn More

This kit contains the following parts :

• 1 x Oil Seal 50.72.10- Doda Part Number GTP139
• 1 x Taper Roller Bearing 31310 - Doda Part Number CUS118
• 1 x Shim 95x110MM - Doda Part Number BUL7593
• 1 x Bearing 3307- Doda Part Number CUS175
• 1 x Shim 65x77 T.04MM - Doda Part Number GRU241
• 1 x Shim 65x77 T.03MM - Doda Part Number GRU242

Learn More

4" OROFLEX 20 - 200 METRE LENGTH NO COUPLINGS SUPPLIED Only available in 200m lengths. Price shown is for 1 x 200m box (@ £14.16/metre) ships 400m per pallet Learn More

BATTIONI MEC LOCK NUT M27X2 TO SUIT MEC 6500 & 8000M SERIES PUMPS POS 18 AME32BP 5050300002BP Learn More

L27/L35 INPUT SHAFT 1" 3/8 Z=6 TEETH Learn More

This kit includes the following: 1 x GRU130 Crown Gear Z - 29 (TEETH) 1 x GRU132 Crown Gear Z - 43 (TEETH) 1 x GRU121 Crown Gear Z - 50 (TEETH) Learn More

AFI L27-L35 Gearbox Housing Learn More

BATTIONI MANIFOLD COVER 401060156BP POS 49 SUITS: MEC 9000, 11000, 13500 M SERIES PUMPS Learn More

OUTPUT SHAFT Z=21 TEETH L35 1:2.38 IV 1:1.6 Learn More

This kit includes the following items: Blind Cap 72 x 10 - GTP240 Oil Seal 35.80.10 - GTP159 Oil Seal 50.72.10 - GTP139 Learn More

BATTIONI GEARBOX COVER 9000 -13500 M TO SUIT MEC 9000, 11000 & 13500 M SERIES PUMPS POS 19 4010601154BP Learn More

BATTIONI RUBBER BALL 90MM POS 33 SUITS: MEC 9000, 11000, 13500 M SERIES PUMPS Learn More

This kit contains the following parts :

• 1 x Shim 65 x 77 T.0.4 - Doda Part Number GRU241
• 1 x Shim 65x77 T.0.3 - Doda Part Number GRU242
• 1 x Shim 65x80- Doda Part Number BUL7576
• 1 x Bearing 6307- Doda Part Number CUS137
• 1 x CIR Clip - Doda Part Number BUL7313
• 1 x Oil Seal 35.80.10 - Doda Part Number GTP159
• 1 x Bearing 3208 - Doda Part Number CUS142
• 1 x Shim 45x65 - Doda Part Number BUL7567
Learn More

5" OROFLEX 20 - 200 METRE LENGTH NO COUPLINGS SUPPLIED Only available in 200m lengths. Price shown is for 1 x 200m box(@ £19.32/metre) Ships 400m per pallet Learn More

BALL BEARING DEEP GROVE 6307 TO SUIT MEC 5000 - 13500 M SERIES PUMPS 5012107010 POS 10 - 9000, 11000 & 13500 M SERIES PUMPS POS 11 - 5000, 6500 & 8000 M SERIES PUMPS Learn More

CROWN GEAR - AFI L35 1000RPM 1:2,38 Z = 50 (TEETH) Learn More

This suits both 1:1,19 and 1:1,6 gearbox ratios This kit includes: 1 x 31310 Taper Koyo Bearing - CUS118 3 x Bearing 33208/Q - CUS119 1 x Bearing 32307J2 - CUS120 1 x Bearing 33109/Q - CUS121 1 x Oil Seal 50.72.10 - GTP139 1 x Oil Seal 45.60.7- GTP140 Learn More

L27/L35 RUBBER CONE GASKET SEAL *SEAL ONLY Learn More

This  item contains the following part :

• 1 x AFI HD35 & Reverse Impeller  - Doda Part Number 3002

Learn More

OIL PUMP DRIVE PN22-33 - 45-58-84 -106 -130-140-155D PN23-33 - 45-58-84-106-130-140-155 M 1622002600 Learn More

OIL PUMP CW ROTATION PN130D PN140D PN150D PN130M PN140M PN155M 4024251000 Learn More

HD35 GEARBOX SUPPORT Learn More

HD35 CROWN GEAR 824RPM R.1:3.31 Z=53 TEETH Learn More

OIL PUMP GASKET PN130-140-155M PN130-140-155D 1680609700 Learn More

AFI BLADE SPLINED AND BALANCED *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

PULLEY 132 1/A FOR: - 24/5 IV PUMP - L35 IV PUMP *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn More

JUROP PN140 PUMP DIRECT DRIVE SPLINED SHAFT 14000L *VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED *NO GEARBOX *PLEASE CONTACT US TO ENQUIRE AVAILABILITY ON THIS PUMP LEAD TIME WILL THEN BE GIVEN Learn More

This kit contains the following parts :

• 1 x Oil Seal  - Doda Part Number GTP257
• 1 x Bearing  - Doda Part Number CUS170
• 1 x Bearing  - Doda Part Number CUS162
• 1 x SHIMS 70 X 85 - 0.3/0.4/0.5; - Doda Part Number BUL7573
• 1 x Cir Clip - Doda Part Number BUL7316
• 1 x Oil Seal  - Doda Part Number GTP247

Learn More

JUROP VANE PN106M PN106D 1601601000 4 REQUIRED ON PUMP Approximate dimensions: 443mm x 60mm x 9mm Learn More

PN140 VANE 4 ON PUMP PN140M PN140D 1601606200 Approximate dimensions: 530mm x 63mm x 9mm Learn More

BRACKET FOR DODA FRAME FOR FITTING L27/L35 PUMP MODELS Learn More

PEDESTAL PUMP SHAFT *KEYS NOT INCLUDED. Learn More

HD35 OUTPUT SHAFT RATION - 1:3.05 17 TEETH *DELIVERY TIME IS 3-4 WEEKS FOR THIS PART Learn More

L35 Doda Pump 1000RPM R.1:2,38 without primer • Max Output pressure – 12bar • Max Flow Rate – 255m3/hour • PTO input speed – 1000RPM • Auto priming • 130HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 2-3 WEEKS Learn More

JUROP PN140 VACUUM PUMP C/W HYDRAULIC DRIVE 14000 LTR * VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED Learn More

Garda MEC 11000L Dual Pump System

11000L MEC Vacuum Pump
Centrifugal Pump
Garda Gearbox c/w Change Over Handle

Ideal for rain gun or umbilical applications

Manufacturer Part Number: G7511000

Learn More

HD35/L35 WELD ON FLANGE OUTLET Learn More

JUROP PN155 PUMP DIRECT DRIVE SPLINED SHAFT *VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED *NO GEARBOX *PLEASE CONTACT US TO ENQUIRE AVAILABILITY ON THIS PUMP LEAD TIME WILL THEN BE GIVEN Learn More

Jurop PN140M Vacuum Pump 14000LT 540 RPM Gearbox C/W EXHAUST MANIFOLD AND SUCTION MANIFOLD * VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED Learn More

JUROP V-RING VA 50 4022203021 Julia 3000 - 5000 Julia 7000 - 8000 - Pump PN - PNR - LC Learn More

Vacuum Primer Body Cover - Bearing Side Learn More

BATTIONI MEC 13500 LTR HYDRAULIC SLURRY PUMP 9363854051 Learn More

HD35 1:2.73 2020 SPLINED PARTS KIT THIS KIT CONTAINS: 1 X PINION SPLINED SHAFT 1000RPM 1:2.73 Z=19 TEETH - GRU195Z 1 X SELF LOCKING IMPELLER NUT - BUL7000 1 X AFI BLADE SPLINED AND BALANCED - 0608016 1 X REVERSE BLADE SUPPORT C/W BRONZE BUSH - 0608019 2 x AFI REVERSE BLADE - 1502 Learn More

AFI HD35 GLV CONE COVER *SEAL NOT INCLUDED Learn More

AFI HD35 Cone Seal 3MM Learn More

Battioni MEC 13500 Ltr Slurry Pump
540 RPM Gearbox

Availability - 7 to 14 Days

9003800051 Learn More

JUROP M30 X 2 SELF-LOCKING NUT 4026305616 Julia 3000 - 5000 Julia 7000 - 8000 - Pump PN - PNR - LC Learn More

AFI REVERSE BLADE 1 X BLADE *2 REQUIRED PER PUMP (FIXINGS NOT INCLUDED) Learn More

This item contains the following part :

• 1 x AFI HD35 & L35 Impeller - Doda Part Number 3003

Learn More

2 WAY OIL PUMP LEFT PN130M PN140M PN155M PN130D PN140D PN155D 4024251500 Learn More

BELT A37-1/2 FOR VACUUM PRIMER FOR IV PUMP PULLY BELT Learn More

VALVE DODA PUMP Learn More

HD35 CROWN GEAR 1000RPM R.1:2.73 Z=52 TEETH Learn More

Doda HD35 PTO Shaft 'Shear Bolt Protected' 1 3/4" 20 Spline - 1 3/8" 6 Spline Learn More

OIL DRIPPER 2 ON PUMP PN45-58-84-106M PN45-58-84-106D 1401200400 Learn More

BRONZE BUSH AFI HD35 2020 *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

OIL PUMP PROTECTION PLATE 1642100200 Learn More

JUROP GASKET KIT PN130-140 /SL Parts included in this kit 1892005300: 1 x 1680614300 MANIFOLD GASKET PN 140 1 x 1680614100 GEARBOX MANIFOLD 2 x 1680610200 TOP MANIFOLD GASKET 1 x 1680610500 FLANGE GASKET 1 x 1680609700 OIL PUMP GASKET 1 x 16807011E0 CLAPET GASKET 1 x 1680707300 FRONT FLANGE GASKET 1 x 1680707800 CAP GASKET 2 x 4022200323 O-RING 4850 VITON (COL.VERDE) 2 x 4022200113 SEAL RING 70X55X15 VITON 1 x 4022200040 SEAL RING 72X40X10 DIN 3760-NBR 1 x 4022200011 SEAL RING 64X80X8 DIN 3760-NBR 1 x 4022200030 SEAL RING 41X27X10 DIN 3760-NBR 1 x 4022200044 SEAL RING 65X45X8 DIN 3760-NBR Learn More

This item contains the following part:

• 1 x AFI HD35 & L35 Convoyer Housing - Doda Part Number 3001

Learn More

This kit includes: 1 x Oil Pump for HD pumps - IDR220SX 2 x Female 3/8" flange - IDR269 Learn More

Hertell Heavy duty high capacity primer pump. - Hydraulic motor - Oil feed droppers - 1" hose connectors * Note - Hydraulic motor hoses and oil bottles not included Learn More

COMPENSATION RING 2 ON PUMP PN 45-58-84-106 D PN 45-58-84-106 M 4026300020 Learn More

HYDRAULIC HOSE KIT FOR HERTELL PRIMER PUMP Learn More

DODA PUMP FRAME COMPLETE WITH LEGS AND PINS BRACKET REQUIRED FOR FITTING L27/L35 PUMP MODELS Learn More

HD35 Gear Box Rear Cover Learn More

L35 Doda Pedestal Pump without primer ### EMAIL FOR LEAD TIME ON THIS PUMP ### Learn More

JUROP PN106 VACUUM PUMP C/W HYDRAULIC DRIVE 11000 LTR * VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED

Learn More

HD35 2020 PINION SPLINED SHAFT 1000RPM 1:2.73 Z=19 TEETH Learn More

SPLINED HYDRAULIC HUB Z=12 CONICAL SHAFT FOR HD HYDRAULIC PUMP Learn More

JUROP PN106 PUMP DIRECT DRIVE SPLINED SHAFT 1300RPM 11000L *VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED *NO GEARBOX *PLEASE CONTACT US TO ENQUIRE AVAILABILITY ON THIS PUMP LEAD TIME WILL THEN BE GIVEN Learn More

This kit contains the following parts:

• 1 x Oil Seal - Doda Part Number GTP217
• 1 x Bearing - Doda Part Number CUS201
• 1 x AFI GEARBOX SHIMS DIA. 85 X 100 (0.3/0.4/0.5) BUL7574
• 1 x Bearing - Doda Part Number CUS163

Learn More

BALL BEARING DEEP GROOVE 6208 2 USED ON PUMP TO SUIT MEC 5000 - 13500 M SERIES PUMPS 5012107004 POS 9 - 5000, 6500 & 8000 M SERIES PUMPS POS 26 - 9000, 11000 & 13500 M SERIES PUMPS Learn More

BLUE HARDENED HIGH ABRASION RESISTANT DODA AFI HD35 & L35 IMPELLER HARD WEARING IMPELLER FOR SAND PUMPING AND HIGH ABRASION APPLICATIONS ### EMAIL FOR LEAD TIME ### Learn More