Search results for 'diaphragm for grundfos jetpaq jq4 pump'

RIV PERSPEX BOWL FOR SIPHON APPRIX DIMENSIONS: LENGTH = 14CM WIDTH INSIDE TO INSIDE AT SCREW = 18CM Learn More

BATTIONI OIL SEAL 35.50.7 35507 POS 52 SUITS: MEC 9000, 11000, 13500 M SERIES PUMPS Learn More

BATTIONI MANIFOLD COVER 401060156BP POS 49 SUITS: MEC 9000, 11000, 13500 M SERIES PUMPS Learn More

6" LONG RADIUS WELD ON BEND SUITABLE FOR TRANSER BOOMS Learn More

DANFOSS OMS 400 HYDRAULIC MOTOR C/W PRESET RELIEF VALVE 32MM SHAFT 10MM KEY WAY SUITABLE FOR HOSE REELERS Learn More

DANFOSS OMR 315 HYDRUALIC MOTOR SUITABLE FOR HOSE REELERS 25MM SHAFT 8MM KEY WAY Learn More

6" GLADIO O-RING GASKET FOR FLANGE RIV 9859 Learn More

8" GLADIO O-RING GASKET FOR FLANGE RIV 9859 Learn More

HERTELL PAPER GASKET 6" GATE VALVE 02LA150006 Learn More

HERTELL FLANGE O-RING FOR 6" GATE VALVE 02LA150017 NO. 17 Learn More

JUROP PNR SILENCER 122-155 PN106/140 15470D2CB0 Learn More

Lasts on average 5 times longer than standard impeller
Blue Hardened High Abrasion Resistant Doda AFI HD35 & L35 Impeller Hard Wearing Impeller For Sand Pumping And High Abrasion Applications

Learn More

BATTIONI RUBBER BALL 90MM POS 33 SUITS: MEC 9000, 11000, 13500 M SERIES PUMPS Learn More

BATTIONI PTO CONE BOLT ON LARGE 4060505000BP POS 17 SUITS: MEC 9000, 11000, 13500 M SERIES PUMPS Learn More

STEEL STRUCTURE FOR 5" SIGHT GLASS Learn More

VOGELSANG BLADE HOLDER TMH.503 FOR 2440 ECL MACERATOR ONLY Learn More

HEAVY DUTY HANDLE KIT FOR 6" BRASS VALVE (8" HANDLE KIT ALSO AVAILABLE) Learn More

HEAVY DUTY HANDLE KIT FOR 8" BRASS VALVE (6" HANDLE KIT ALSO AVAILABLE) Learn More

4" OROFLEX 20 - 200 METRE LENGTH NO COUPLINGS SUPPLIED Only available in 200m lengths. Price shown is for 1 x 200m box ships 400m per pallet Learn More

5" OROFLEX 20 - 200 METRE LENGTH NO COUPLINGS SUPPLIED Only available in 200m lengths. Price shown is for 1 x 200m box Ships 400m per pallet Learn More

AFI BLADE SPLINED AND BALANCED *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

BRONZE BUSH AFI HD35 2020 *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

REVERSE BLADE SUPPORT HD35 2020 INCULDING BRONZE BUSH *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

HERTELL O-RING FOR 6" GATE VALVE 02LA200003 NO. 3 Learn More

SELF LOCKING IMPELLER NUT HD35 2020 *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

131-139 SUPER CLAMP *picture for illustration purposes only Learn More

113-121MM SUPER CLAMP *picture for illustration purposes only Learn More

86-91 SUPER CLAMP *picture for illustration purposes only Learn More

Flowmeter c/w DD Slurry Monitor (Kit includes flow meter, in cab display, wiring harness & speed input lead)

• Comes with compact in cab hand set display
• Speed input lead for forward ground speed from the tractors CANBUS (dash)
• Compatible with Umbilical Systems & Tankers
• Live application rate
• Total volume recorded
• Indicates the correct driving speed to achieve application rates
• RTK data
• Jobs saved
• Individual fields saved
• USB port for downloading data
• Clean waterproof display that can be wiped clean
• Units in UK Gallons or Cubic Meters
• Can be used with GPS speed sensor

Learn More

Flowmeter c/w DD Slurry Monitor (Kit includes flow meter, in cab display, wiring harness & speed input lead)

• Comes with compact in cab hand set display
• Speed input lead for forward ground speed from the tractors CANBUS (dash)
• Compatible with Umbilical Systems & Tankers
• Live application rate
• Total volume recorded
• Indicates the correct driving speed to achieve application rates
• RTK data
• Jobs saved
• Individual fields saved
• USB port for downloading data
• Clean waterproof display that can be wiped clean
• Units in UK Gallons or Cubic Meters
• Can be used with GPS speed sensor

Learn More

Flowmeter c/w DD Slurry Monitor (Kit includes flow meter, in cab display, wiring harness & speed input lead)

• Comes with compact in cab hand set display
• Speed input lead for forward ground speed from the tractors CANBUS (dash)
• Compatible with Umbilical Systems & Tankers
• Live application rate
• Total volume recorded
• Indicates the correct driving speed to achieve application rates
• RTK data
• Jobs saved
• Individual fields saved
• USB port for downloading data
• Clean waterproof display that can be wiped clean
• Units in UK Gallons or Cubic Meters
• Can be used with GPS speed sensor

Learn More

Flowmeter c/w DD Slurry Monitor (Kit includes flow meter, in cab display, wiring harness & speed input lead)

• Comes with compact in cab hand set display
• Speed input lead for forward ground speed from the tractors CANBUS (dash)
• Compatible with Umbilical Systems & Tankers
• Live application rate
• Total volume recorded
• Indicates the correct driving speed to achieve application rates
• RTK data
• Jobs saved
• Individual fields saved
• USB port for downloading data
• Clean waterproof display that can be wiped clean
• Units in UK Gallons or Cubic Meters
• Can be used with GPS speed sensor

Learn More

• 12 Volt, comes with short loom and plug
• All flowmeters are wet tested and calibrated
• Compatible with all interfaces like slurry monitor, Isobus etc
• Heavy duty steel body construction and flanges
• Also available in 4”, 5” & 8” bore sizes

Learn More

COVER FOR AFI MONOLITHIC WIDIA SEAL (HOLDER) * MUST BE USED WITH 2024 MONOLOTHIC SEAL KIT * PUMPS PRE 2024 MUST UPGRADE TO THIS WIDIA SEAL WHEN ORDERING 2024 MONOLOTHIC SEAL KIT Learn More

NEW 2024 MONOLITHIC AFI MECHANICAL SEAL SET WITHOUT HOLDER KIT CONTAINS: 1 X GTP125M 1 X GTP126 * MUST BE USED WITH COVER FOR AFI MONOLITHIC WIDIA SEAL 0608034 (HOLDER) Learn More

• Record keeping per field
• Live flow rate
• Live application rate
• Target forward speed advised
• Saves space in cab
• Hydraulic control (optional) all on same screen
• Rate control with regulation valve or forward speed adjustment (depending on tractor)
• Umbilical or Tanker compatible
• Units displayed in Cubic meters (m3) or imperial gallons

Learn More

• Record keeping per field
• Live flow rate
• Live application rate
• Target forward speed advised
• Saves space in cab
• Hydraulic control (optional) all on same screen
• Rate control with regulation valve or forward speed adjustment (depending on tractor)
• Umbilical or Tanker compatible
• Units displayed in Cubic meters (m3) or imperial gallons

Learn More

• Record keeping per field
• Live flow rate
• Live application rate
• Target forward speed advised
• Saves space in cab
• Hydraulic control (optional) all on same screen
• Rate control with regulation valve or forward speed adjustment (depending on tractor)
• Umbilical or Tanker compatible
• Units displayed in Cubic meters (m3) or imperial gallons

Learn More

• Record keeping per field
• Live flow rate
• Live application rate
• Target forward speed advised
• Saves space in cab
• Hydraulic control (optional) all on same screen
• Rate control with regulation valve or forward speed adjustment (depending on tractor)
• Umbilical or Tanker compatible
• Units displayed in Cubic meters (m3) or imperial gallons

Learn More

• 12 Volt, comes with short loom and plug
• All flowmeters are wet tested and calibrated
• Compatible with all interfaces like slurry monitor, Isobus etc
• Heavy duty steel body construction and flanges
• Also available in 4”, 5” & 8” bore sizes

Learn More

• 12 Volt, comes with short loom and plug
• All flowmeters are wet tested and calibrated
• Compatible with all interfaces like slurry monitor, Isobus etc
• Heavy duty steel body construction and flanges
• Also available in 4”, 6” & 8” bore sizes

Learn More

ALRENA V42 WEARPLATE SCREEN - G5 * ONLY 1 SUPPLIED * 2 REQUIRED PER MACERATOR * NOTE - ONLY FOR USE IN MACERATORS WITH SERIAL PLATES PRE 2023 Learn More

REVERSE BLADE SUPPORT INCLUDES BRONZE BUSH *NUTS, BOLTS AND WASHERS NOT INCLUDED *FOR NON SPLINED SHAFT Learn More

INPUT PINION SHAFT *3242 ONLY *NON - SPLINED. PLEASE CHECK CURRENT SHAFT BEFORE ORDERING Learn More

HERTELL OIL DRIPPER SAME FOR ALL B MODELS (B-400 TO B-2200) *NOT SUITABLE WITH DODA OIL RESERVOIR GLOBE (PVC111) 01BO822018 Learn More

BATTIONI LOCK NUT FOR GARDA 75 G37BP Learn More

FILTERING ELEMENT FOR PSC366 COMPLETE FILTER Learn More

STEM AND SCREWED RING FOR 4" EXPORT BALL VALVE RIV 5550 / CW614 Learn More

RIV LEVER FOR 4" EXPORT BALL VALVE RIV 5550 RICAMBGENER Learn More

GASKET FOR 4" PERLA CAP - RIV 9834 GUSS680D0016 Learn More

INPUT PINION SHAFT AFI IV GEAR BOX FOR SPLINED SHAFT Z12 *3242B ONLY *SPLINED. PLEASE CHECK CURRENT SHAFT BEFORE ORDERING *LEAD TIME FOR THIS PART IS 3-4 WEEKS Learn More

• 12 Volt, comes with short loom and plug
• All flowmeters are wet tested and calibrated
• Compatible with all interfaces like slurry monitor, Isobus etc
• Heavy duty steel body construction and flanges
• Also available in 5”, 6” & 8” bore sizes

Learn More

KEY C45K 8X7X30 UNI6604 NEEDED FOR GRU112- REPLACES BUL6067 FOR THIS SHAFT Learn More

BATTIONI HOUSING TO SUIT BATTIONI MEC 9000, 11000 & 13500 M SERIES PUMPS POS 7 4010301028BP Learn More

BALL BEARING DEEP GROVE 6307 TO SUIT MEC 5000 - 13500 M SERIES PUMPS 5012107010 POS 10 - 9000, 11000 & 13500 M SERIES PUMPS POS 11 - 5000, 6500 & 8000 M SERIES PUMPS Learn More

BATTIONI MEC LOCK NUT M27X2 TO SUIT MEC 6500 & 8000M SERIES PUMPS POS 18 AME32BP 5050300002BP Learn More

VANE FOR DODA PRIMER 4 REQUIRED ON EACH PRIMER Approximate dimensions: L - 72mm W - 43mm H - 5mm Learn More

JUROP SEAL KIT FOR HYDRAULIC MOTOR 4022200123 Learn More

HD35 OUTPUT SHAFT RATION - 1:3.05 17 TEETH *DELIVERY TIME IS 3-4 WEEKS FOR THIS PART Learn More

Alloy interlocking coupling suitable for lay-flat drag hoses. Complete as pair (2 halves) Spanner not included Learn More

Oil Filter Assembly for HD Pumps Learn More

Alloy interlocking coupling suitable for lay-flat drag hoses. Complete as pair (2 halves) Spanner not included Learn More

BATTIONI GEARBOX COVER 9000 -13500 M TO SUIT MEC 9000, 11000 & 13500 M SERIES PUMPS POS 19 4010601154BP Learn More

BALL BEARING DEEP GROVE 6304 TO SUIT MEC 5000 - 13500 M SERIES PUMPS 5012107006 POS 7 - 5000, 6500 & 8000 M SERIES PUMPS POS 8 - 9000, 11000 & 13500 M SERIES PUMPS Learn More

This kit contains the following parts :

• 1 x 4" Rubber O-Ring - Doda Part Number GTP213
• 1 x Bauer Cone for Afi Pumps; Doda Part Number 3182
• 1 x 6" Rubber O-Ring - Doda Part Number GTP214

*note - bauer cone not complete with clamps Learn More

This kit contains the following parts :

• 1 x Cover for A7D Gearbox - Doda Part Number GRU176
• 8 x VSP Bolt M8x20 - Doda Part Number BUL5601
• 8 x M8 Washer - Doda Part Number BUL8201
• 1 x Plug Drain - Doda Part Number RAC100
GTP141 is no longer provided. Please use silicon gel instead

Learn More

O-RING FOR PERLA 4"/5"/6" GATE VALVES RIV 9858 Learn More

KNOB FOR 5" SIGHT GLASS RIV 9925 *COLOURS MAY VARY Learn More

Brass Rotor For Vacuum Primer & Shaft Learn More

Sealing Ring for Widia Holder Learn More

RIV 1/2" M TO 1/4" FM BRASS REDUCER FOR MANO METER Learn More

4" GLADIO O-RING GASKET FOR FLANGE RIV 9859 Learn More

L27 Doda Pump 1000RPM R.1:3,35 without primer • Max Output pressure – 14.5bar • Max Flow Rate – 200m3/hour • PTO input speed – 1000RPM • Auto priming • 125HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 3-4 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

HD35 Doda IV Pump R.1:1,6 without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 230HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

DODA PUMP FRAME COMPLETE WITH LEGS AND PINS BRACKET REQUIRED FOR FITTING L27/L35 PUMP MODELS Learn More

BATTIONI AUTOMATIC OIL PUMP KEY MEC/M Series ###EMAIL FOR LEAD TIME ### Learn More

PEDESTAL PUMP SHAFT *KEYS NOT INCLUDED. Learn More

HD35 COMPLETE GEARBOX R.1.2.73 C/W SPLINED SHAFT C/W WITH OIL PUMP IDR220SX ONLY *3-4 week delivery leadtime Learn More

AFI REVERSE BLADE 1 X BLADE *2 REQUIRED PER PUMP (FIXINGS NOT INCLUDED) Learn More

JUROP GASKET KIT PN130-140 /SL Parts included in this kit 1892005300: 1 x 1680614300 MANIFOLD GASKET PN 140 1 x 1680614100 GEARBOX MANIFOLD 2 x 1680610200 TOP MANIFOLD GASKET 1 x 1680610500 FLANGE GASKET 1 x 1680609700 OIL PUMP GASKET 1 x 16807011E0 CLAPET GASKET 1 x 1680707300 FRONT FLANGE GASKET 1 x 1680707800 CAP GASKET 2 x 4022200323 O-RING 4850 VITON (COL.VERDE) 2 x 4022200113 SEAL RING 70X55X15 VITON 1 x 4022200040 SEAL RING 72X40X10 DIN 3760-NBR 1 x 4022200011 SEAL RING 64X80X8 DIN 3760-NBR 1 x 4022200030 SEAL RING 41X27X10 DIN 3760-NBR 1 x 4022200044 SEAL RING 65X45X8 DIN 3760-NBR Learn More

JUROP PN140 PUMP DIRECT DRIVE SPLINED SHAFT 14000L *VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED *NO GEARBOX *PLEASE CONTACT US TO ENQUIRE AVAILABILITY ON THIS PUMP LEAD TIME WILL THEN BE GIVEN Learn More

JUROP PN106 PUMP DIRECT DRIVE SPLINED SHAFT 1300RPM 11000L *VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED *NO GEARBOX *PLEASE CONTACT US TO ENQUIRE AVAILABILITY ON THIS PUMP LEAD TIME WILL THEN BE GIVEN Learn More

HD35 Complete Gearbox only R.1:3,31 Complete with oil pump IDR220SX only *3-4 week delivery leadtime Learn More

HD35 Doda IV Pump R.1:1,19 c/w oil cooler, without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 180HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 5-6 WEEKS Learn More