Search results for 'Oil filler cap'

This kit contains the following parts:

• 1 x Oil Seal - Doda Part Number GTP217
• 1 x Bearing - Doda Part Number CUS201
• 1 x AFI GEARBOX SHIMS DIA. 85 X 100 (0.3/0.4/0.5) BUL7574
• 1 x Bearing - Doda Part Number CUS163

Learn More

L35 Doda Pump 1000RPM R.1:2,38 without primer • Max Output pressure – 12bar • Max Flow Rate – 255m3/hour • PTO input speed – 1000RPM • Auto priming • 130HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 2-3 WEEKS Learn More

JUROP OIL TANK PLUG PN106 SL 1000RPM - POS 89 PN130M, PN140M PN155M - POS 87 PN130D, PN140D - POS 78 4026910103 Learn More

VACUUM PRIMER OIL RESERVOIR Learn More

TOP HAT BAUER (PRIMING CAP) CLAMP INCLUDED *TOP HAT CLAMP MAY VARY Learn More

100 TECNO - GREAT CAPACITY SIPHON - TRAP ASSEMBLY Learn More

JUROP OIL FLANGE PN140/LC420 1610512900 PN130 M PN140 M PN155 M PN155R M PN 130 D – Splined shaft PN 140 D – Splined shaft PN 155 D – Splined shaft Learn More

GASKET FOR 4" PERLA CAP - RIV 9834 GUSS680D0016 Learn More

HD35 Doda Pump 1:2.73-Z c/w New 2020 Splined Shaft & Chopper System WITHOUT PRIMER • Max Output pressure – 17bar • Max Flow Rate – 350m3/hour • PTO input speed – 1000RPM • Auto priming • Oil Cooling System • 155HP+ required to operate this pump • 2020 New Chopping system and splined shaft *All values are only a guide and may vary differently in each situation *NOTE: REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

MERLETT 51MM GREEN EXTREME ELASTIC HOSE 50M COIL Learn More

JUROP GASKET KIT R/PN45-58-84-106 G.BOX Parts included in this kit 1892000000: 2 X 4022200110 SEAL RING 72X48X15 NBR 1 X 4022200030 SEAL RING 41X27X10 DIN 3760-NBR 1 X 4022200040 SEAL RING 72X40X10 DIN 3760-NBR 2 X 4022200240 O-RING 4825 2 X 4022200250 O-RING 6287 1 X 1680700000 FRONT BOX GASKET 1 X 1680700200 LID GASKET 1 X 1680700300 OIL TANK LID GASKET 1 X 1680707500 OIL TANK LID GASKET 1 X 1680708900 GASKET M1000rpm 1 X 1680600100 TOP MANIFOLD GASKET Learn More

HD Gear Box Oil Plug Learn More

Hertell Heavy duty high capacity primer pump. - Hydraulic motor - Oil feed droppers - 1" hose connectors * Note - Hydraulic motor hoses and oil bottles not included Learn More

AFI IV INLET CAP Learn More

BATTIONI OIL DROPPER 0025031 Learn More

This suits both 1:1,19 and 1:1,6 gearbox ratios This kit includes: 1 x 31310 Taper Koyo Bearing - CUS118 3 x Bearing 33208/Q - CUS119 1 x Bearing 32307J2 - CUS120 1 x Bearing 33109/Q - CUS121 1 x Oil Seal 50.72.10 - GTP139 1 x Oil Seal 45.60.7- GTP140 Learn More

2 WAY OIL PUMP LEFT PN130M PN140M PN155M PN130D PN140D PN155D 4024251500 Learn More

JUROP OIL DISTRIBUTOR BOX 1608100000 Learn More

This kit contains the following parts :

• 1 x Shim 65 x 77 T.0.4 - Doda Part Number GRU241
• 1 x Shim 65x77 T.0.3 - Doda Part Number GRU242
• 1 x Shim 65x80- Doda Part Number BUL7576
• 1 x Bearing 6307- Doda Part Number CUS137
• 1 x CIR Clip - Doda Part Number BUL7313
• 1 x Oil Seal 35.80.10 - Doda Part Number GTP159
• 1 x Bearing 3208 - Doda Part Number CUS142
• 1 x Shim 45x65 - Doda Part Number BUL7567
Learn More

L27 Doda Pump 1000RPM R.1:3,35 without primer • Max Output pressure – 14.5bar • Max Flow Rate – 200m3/hour • PTO input speed – 1000RPM • Auto priming • 125HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 3-4 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

JUROP OIL TANK PN 45-58-84-106 D - POS 12 PN 45-58-84-106 M - POS 12 1892006200 1612500300 Learn More

JUROP DRIP OILER *PN106 WITH SIDE OIL TANK AND GEARBOX (1000 RPM). PN130, 140 , 155 1401200700 Learn More

Oil Filter Assembly for HD Pumps Learn More

OIL LINE RUBBER PROTECTION PN23-33-45-58-84-106D PN23-33-45-58-84-106M 1642600000 Learn More

JUROP OIL PUMP FILTER DIA 6 4022300001 PN 23-33 D PN 23-33 M PN 45-58-84 D PN 45-58-84 M PN 106 D PN 106 M Learn More

This kit contains the following parts :

• 1 x Oil Seal  - Doda Part Number GTP257
• 1 x Bearing  - Doda Part Number CUS170
• 1 x Bearing  - Doda Part Number CUS162
• 1 x SHIMS 70 X 85 - 0.3/0.4/0.5; - Doda Part Number BUL7573
• 1 x Cir Clip - Doda Part Number BUL7316
• 1 x Oil Seal  - Doda Part Number GTP247

Learn More

HD35 Doda IV Pump R.1:1,19 c/w oil cooler, without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 180HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 5-6 WEEKS Learn More

OIL SEAL HOLDER PD SUPPORT MOTOR SIDE Learn More

CLEAR FLEXIBLE PVC TUBING 30M COIL PSC1110250 OIL DROPPER HOSE Learn More

80 TECNO - GREAT CAPACITY SIPHON - TRAP ASSEMBLY Learn More

OIL PUMP GASKET PN130-140-155M PN130-140-155D 1680609700 Learn More

OIL PUMP PROTECTION PLATE 1642100200 Learn More

HERTELL COMPLETE PRIMER B800 - Hydraulic motor - Oil feed droppers * Note - Hydraulic motor hoses and oil bottles not included Learn More

HD35 Doda Pump R.1:3,31 without primer c/w Splined Shaft & Chopper System • Max Output pressure – 17bar • Max Flow Rate – 396m3/hour • PTO input speed – 1000RPM • Auto priming • Oil Cooling System • 200HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

Gate Valve - 6" - 2 Flange Great Capacity Valve 3/8" Bsp C/W Spring Ram *Manufacturer may vary Learn More

JUROP GASKET KIT PN130-140 /SL Parts included in this kit 1892005300: 1 x 1680614300 MANIFOLD GASKET PN 140 1 x 1680614100 GEARBOX MANIFOLD 2 x 1680610200 TOP MANIFOLD GASKET 1 x 1680610500 FLANGE GASKET 1 x 1680609700 OIL PUMP GASKET 1 x 16807011E0 CLAPET GASKET 1 x 1680707300 FRONT FLANGE GASKET 1 x 1680707800 CAP GASKET 2 x 4022200323 O-RING 4850 VITON (COL.VERDE) 2 x 4022200113 SEAL RING 70X55X15 VITON 1 x 4022200040 SEAL RING 72X40X10 DIN 3760-NBR 1 x 4022200011 SEAL RING 64X80X8 DIN 3760-NBR 1 x 4022200030 SEAL RING 41X27X10 DIN 3760-NBR 1 x 4022200044 SEAL RING 65X45X8 DIN 3760-NBR Learn More

Unidirectional Oil Flow Valve * LEAD TIME = 3-4 WEEKS ON THIS PRODUCT Learn More

OIL PUMP DRIVE PN22-33 - 45-58-84 -106 -130-140-155D PN23-33 - 45-58-84-106-130-140-155 M 1622002600 Learn More

OIL SEAL 60.72.7 Learn More

PERLA SERIES 4" CAP - RIV 9822 TESS31091016 Learn More

This kit includes the following: 1 x O Ring PD version - GTP131 1 x Oil Seal Holder PD Impeller Side - 3026 2 x Oil Seal 45.60.10 - GTP130 1 x BEARING SKF 31309 J2/QCL7C (30309DJ) - CUS114 1 x Bearing 6209 - CUS115 1 x Shim 65 x 85 - BUL7557 Learn More

40MM GREEN EXTREME ELASTIC HOSE 50M COIL Learn More

JUROP OIL TANK REPLACEMENT KIT .PN140-155-160SL Learn More

This kit contains the following parts :

• 1 x Oil Plug 3/8" - Doda Part Number GRU127
• 1 x Oil Plug Gasket Seal - Doda Part Number GTP246

Learn More

HD35 Complete Gearbox only R.1:3,31 Complete with oil pump IDR220SX only *3-4 week delivery leadtime Learn More

HYDRAULIC PUMP RIGHT CC4.2 FOR IV TYPE COOLING SYSTEM POLARIS HYDRAULIC PUMP FOR OIL COOLING - HD35 IV ONLY Learn More

HERTELL OIL DRIPPER SAME FOR ALL B MODELS (B-400 TO B-2200) *NOT SUITABLE WITH DODA OIL RESERVOIR GLOBE (PVC111) 01BO822018 Learn More

This kit includes: 1 x Oil Pump for HD pumps - IDR220SX 2 x Female 3/8" flange - IDR269 Learn More

OIL PUMP CW ROTATION PN130D PN140D PN150D PN130M PN140M PN155M 4024251000 Learn More

OIL VENT CAP 3/4" Learn More

This kit contains the following parts :

• 1 x Oil Seal 50.72.10- Doda Part Number GTP139
• 1 x Taper Roller Bearing 31310 - Doda Part Number CUS118
• 1 x Shim 95x110MM - Doda Part Number BUL7593
• 1 x Bearing 3307- Doda Part Number CUS175
• 1 x Shim 65x77 T.04MM - Doda Part Number GRU241
• 1 x Shim 65x77 T.03MM - Doda Part Number GRU242

Learn More

HD35 Doda IV Pump R.1:1,6 without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 230HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

BATTIONI OIL SEAL 35.50.7 35507 POS 52 SUITS: MEC 9000, 11000, 13500 M SERIES PUMPS Learn More

HD35 COMPLETE GEARBOX R.1.2.73 C/W SPLINED SHAFT C/W WITH OIL PUMP IDR220SX ONLY *3-4 week delivery leadtime Learn More

This kit includes the following items: Blind Cap 72 x 10 - GTP240 Oil Seal 35.80.10 - GTP159 Oil Seal 50.72.10 - GTP139 Learn More

OIL DRIPPER 2 ON PUMP PN45-58-84-106M PN45-58-84-106D 1401200400 Learn More