Search results for 'L35 IV Bearing & Seal Kit'

8" SINGLE ACTING HYDRAULIC SPRING JACK RAM Learn More

6" GLADIO SEAT GASKET RIV 9847 FITS NEW TYPE AND OLD TYPE GLADIO Learn More

8" GLADIO O-RING GASKET FOR FLANGE RIV 9859 Learn More

6" GLADIO O-RING GASKET FOR FLANGE RIV 9859 Learn More

AFI IV GEARBOX COVER - 3 INLET SIDE Learn More

HYDRAULIC PUMP RIGHT CC4.2 FOR IV TYPE COOLING SYSTEM POLARIS HYDRAULIC PUMP FOR OIL COOLING - HD35 IV ONLY Learn More

8MM ROUND STEEL FLANGE TO SUIT 8" SWIVEL JOINT Learn More

8MM ROUND STEEL FLANGE TO SUIT 6" SWIVEL JOINT Learn More

8MM ROUND STEEL FLANGE TO SUIT 4" SWIVEL JOINT Learn More

4" GLADIO SCREWED LOCKING RING - NEW SERIES RIV 9848 Learn More

4" GLADIO LOCKING RING - OLD SERIES RIV 9845 Learn More

8" SWIVEL JOINT O RING Learn More

6" SWIVEL JOINT O RING Learn More

4" SWIVEL JOINT O RING Learn More

BRACKET FOR DODA FRAME FOR FITTING L27/L35 PUMP MODELS Learn More

Lasts on average 5 times longer than standard impeller
Blue Hardened High Abrasion Resistant Doda AFI HD35 & L35 Impeller Hard Wearing Impeller For Sand Pumping And High Abrasion Applications

Learn More

PULLEY 132 1/A FOR: - 24/5 IV PUMP - L35 IV PUMP *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn More

HD35/L35 WELD ON FLANGE OUTLET Learn More

60MM RUBBER FLOATING BALL RIV 9912 Learn More

HD35 1:2.73 2020 SPLINED PARTS KIT THIS KIT CONTAINS: 1 X PINION SPLINED SHAFT 1000RPM 1:2.73 Z=19 TEETH - GRU195Z 1 X SELF LOCKING IMPELLER NUT - BUL7000 1 X AFI BLADE SPLINED AND BALANCED - 0608016 1 X REVERSE BLADE SUPPORT C/W BRONZE BUSH - 0608019 2 x AFI REVERSE BLADE - 1502 Learn More

BELT A37-1/2 FOR VACUUM PRIMER FOR IV PUMP PULLY BELT Learn More

Lasts on average 5 times longer than standard body housing
Doda AFI HD35 & L35 Pump Body Housing Widia Blue Hardened High Abrasion Resistant Hard Wearing Pump Body For Sand Pumping And High Abrasion Applications

Learn More

KNOB FOR 5" SIGHT GLASS RIV 9925 *COLOURS MAY VARY Learn More

RIV 80MM RUBBER FLOATING BALL RIV 9912 Learn More

8" GLADIO KNIFE GATE VALVE Learn More

RIV 6" GLADIO KNIFE GATE VALVE Learn More

5" SIGHT GLASS - BOWL ONLY Learn More

4" GLADIO SEAT GASKET RIV 9847 FITS NEW TYPE AND OLD TYPE GLADIO Learn More

RIV 4" GLADIO KNIFE GATE VALVE Learn More

4" GLADIO O-RING GASKET FOR FLANGE RIV 9859 Learn More

RIV DN80 PLASTIC FLOATING BALL RIV 9911 Learn More

RIV DRAINBALL VALVE M X HOSE CONN. -3/4 BSP-25MM SPIGOT Learn More

Garda MEC 11000L Dual Pump System

11000L MEC Vacuum Pump
Centrifugal Pump
Garda Gearbox c/w Change Over Handle

Ideal for rain gun or umbilical applications

Manufacturer Part Number: G7511000

Learn More

8" SWIVEL JOINT *COLOURS MAY VARY 35cm x 35cm x 12.7cm height Learn More

HEAVY DUTY HANDLE KIT FOR 8" BRASS VALVE (6" HANDLE KIT ALSO AVAILABLE) Learn More

HEAVY DUTY HANDLE KIT FOR 6" BRASS VALVE (8" HANDLE KIT ALSO AVAILABLE) Learn More

STEEL STRUCTURE FOR 5" SIGHT GLASS Learn More

RIV PERSPEX BOWL FOR SIPHON APPRIX DIMENSIONS: LENGTH = 14CM WIDTH INSIDE TO INSIDE AT SCREW = 18CM Learn More

O-RING FOR PERLA 4"/5"/6" GATE VALVES RIV 9858 Learn More

6" RUBBER FLANGE GASKET 4 BOLT SQUARE Learn More

RIV 4" EXPORT BALL FLANGED VALVE-MOUNTING PAD+ HANDLE Learn More

5" BLACK CASING GLADIO PAIR TO SUIT 5" GLADIO GATE VALVE SOLD AS A PAIR Learn More

Flowmeter c/w DD Slurry Monitor (Kit includes flow meter, in cab display, wiring harness & speed input lead)

• Comes with compact in cab hand set display
• Speed input lead for forward ground speed from the tractors CANBUS (dash)
• Compatible with Umbilical Systems & Tankers
• Live application rate
• Total volume recorded
• Indicates the correct driving speed to achieve application rates
• RTK data
• Jobs saved
• Individual fields saved
• USB port for downloading data
• Clean waterproof display that can be wiped clean
• Units in UK Gallons or Cubic Meters
• Can be used with GPS speed sensor

Learn More

Flowmeter c/w DD Slurry Monitor (Kit includes flow meter, in cab display, wiring harness & speed input lead)

• Comes with compact in cab hand set display
• Speed input lead for forward ground speed from the tractors CANBUS (dash)
• Compatible with Umbilical Systems & Tankers
• Live application rate
• Total volume recorded
• Indicates the correct driving speed to achieve application rates
• RTK data
• Jobs saved
• Individual fields saved
• USB port for downloading data
• Clean waterproof display that can be wiped clean
• Units in UK Gallons or Cubic Meters
• Can be used with GPS speed sensor

Learn More

• 12 Volt, comes with short loom and plug
• All flowmeters are wet tested and calibrated
• Compatible with all interfaces like slurry monitor, Isobus etc
• Heavy duty steel body construction and flanges
• Also available in 4”, 5” & 8” bore sizes

Learn More

• 12 Volt, comes with short loom and plug
• All flowmeters are wet tested and calibrated
• Compatible with all interfaces like slurry monitor, Isobus etc
• Heavy duty steel body construction and flanges
• Also available in 4”, 6” & 8” bore sizes

Learn More

• 12 Volt, comes with short loom and plug
• All flowmeters are wet tested and calibrated
• Compatible with all interfaces like slurry monitor, Isobus etc
• Heavy duty steel body construction and flanges
• Also available in 5”, 6” & 8” bore sizes

Learn More

INPUT PINION SHAFT AFI IV GEAR BOX FOR SPLINED SHAFT Z12 *3242B ONLY *SPLINED. PLEASE CHECK CURRENT SHAFT BEFORE ORDERING *LEAD TIME FOR THIS PART IS 3-4 WEEKS Learn More

2" PRESSURE RELIEF VALVE 089025009011 Learn More

100MM OVERFLOW VALVE SEAT POS 7 - RIV 415 GUTPTSF00064 Learn More

Flowmeter c/w DD Slurry Monitor (Kit includes flow meter, in cab display, wiring harness & speed input lead)

• Comes with compact in cab hand set display
• Speed input lead for forward ground speed from the tractors CANBUS (dash)
• Compatible with Umbilical Systems & Tankers
• Live application rate
• Total volume recorded
• Indicates the correct driving speed to achieve application rates
• RTK data
• Jobs saved
• Individual fields saved
• USB port for downloading data
• Clean waterproof display that can be wiped clean
• Units in UK Gallons or Cubic Meters
• Can be used with GPS speed sensor

Learn More

Flowmeter c/w DD Slurry Monitor (Kit includes flow meter, in cab display, wiring harness & speed input lead)

• Comes with compact in cab hand set display
• Speed input lead for forward ground speed from the tractors CANBUS (dash)
• Compatible with Umbilical Systems & Tankers
• Live application rate
• Total volume recorded
• Indicates the correct driving speed to achieve application rates
• RTK data
• Jobs saved
• Individual fields saved
• USB port for downloading data
• Clean waterproof display that can be wiped clean
• Units in UK Gallons or Cubic Meters
• Can be used with GPS speed sensor

Learn More

4" CASING GLADIO PAIR TO SUIT 4" GLADIO GATE VALVE SOLD AS A PAIR Learn More

• Record keeping per field
• Live flow rate
• Live application rate
• Target forward speed advised
• Saves space in cab
• Hydraulic control (optional) all on same screen
• Rate control with regulation valve or forward speed adjustment (depending on tractor)
• Umbilical or Tanker compatible
• Units displayed in Cubic meters (m3) or imperial gallons

Learn More

• Record keeping per field
• Live flow rate
• Live application rate
• Target forward speed advised
• Saves space in cab
• Hydraulic control (optional) all on same screen
• Rate control with regulation valve or forward speed adjustment (depending on tractor)
• Umbilical or Tanker compatible
• Units displayed in Cubic meters (m3) or imperial gallons

Learn More

• Record keeping per field
• Live flow rate
• Live application rate
• Target forward speed advised
• Saves space in cab
• Hydraulic control (optional) all on same screen
• Rate control with regulation valve or forward speed adjustment (depending on tractor)
• Umbilical or Tanker compatible
• Units displayed in Cubic meters (m3) or imperial gallons

Learn More

• Record keeping per field
• Live flow rate
• Live application rate
• Target forward speed advised
• Saves space in cab
• Hydraulic control (optional) all on same screen
• Rate control with regulation valve or forward speed adjustment (depending on tractor)
• Umbilical or Tanker compatible
• Units displayed in Cubic meters (m3) or imperial gallons

Learn More

100MM OVERFLOW 120MM DIA STAINLESS STEEL INTERNAL BALL Learn More

JUROP PN155R DIRECT DRIVE AIR INJECTION SPLINED SHAFT CCW ROTATION MANUAL 4-WAY VALVE *NO GEARBOX Learn More

• 12 Volt, comes with short loom and plug
• All flowmeters are wet tested and calibrated
• Compatible with all interfaces like slurry monitor, Isobus etc
• Heavy duty steel body construction and flanges
• Also available in 4”, 5” & 8” bore sizes

Learn More

GASKET FOR 4" PERLA CAP - RIV 9834 GUSS680D0016 Learn More

PERLA SERIES 4" CAP - RIV 9822 TESS31091016 Learn More

STEM AND SCREWED RING FOR 4" EXPORT BALL VALVE RIV 5550 / CW614 Learn More

SIGHT GLASS STEEL DISC Learn More

JUROP PN140 PUMP DIRECT DRIVE SPLINED SHAFT 14000L *VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED *NO GEARBOX *PLEASE CONTACT US TO ENQUIRE AVAILABILITY ON THIS PUMP LEAD TIME WILL THEN BE GIVEN Learn More

JUROP PN106 PUMP DIRECT DRIVE SPLINED SHAFT 1300RPM 11000L *VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED *NO GEARBOX *PLEASE CONTACT US TO ENQUIRE AVAILABILITY ON THIS PUMP LEAD TIME WILL THEN BE GIVEN Learn More

IV OUTPUT PINION SHAFT R.1:1.19 - Z=21 TEETH *SHAFT GRU112M ONLY Learn More

LAY SHAFT AFI IV GEAR BOX *3240 ONLY Learn More

HD35 GEARBOX HOUSING (E4241) *3-4 week delivery leadtime Learn More

JUROP OIL TANK REPLACEMENT KIT .PN140-155-160SL Learn More

AFI GEARBOX SUPPORT L27/L35 3034 Learn More

HD35 COMPLETE GEARBOX R.1.2.73 C/W SPLINED SHAFT C/W WITH OIL PUMP IDR220SX ONLY *3-4 week delivery leadtime Learn More

DODA PUMP FRAME COMPLETE WITH LEGS AND PINS BRACKET REQUIRED FOR FITTING L27/L35 PUMP MODELS Learn More

JUROP GASKET KIT PN155 M 18920CZRB0 Learn More

5" GLADIO SEAT GASKET RIV 9847 Learn More

5" GLADIO KNIFE GATE VALVE Learn More

RIV 5550 DN100 EXPORT BALL VALVE INOX PLATE - NO.10 Learn More

RIV 5550 DN100 BLUE FLANGED LEVER VALVE SEAT/PTFE RICAMBGENER Learn More

RIV 5550 DN100 BLUE FLANGED LEVER VALVE - O-RING/NO.7 Learn More

RIV 5550 DN100 BLUE FLANGED LEVER VALVE - O-RING/NO.8 Learn More

5" EXPORT BALL FLANGED VALVE C/W MOUNTING PAD + LEVER HANDLE Learn More

HYDRAULIC HOSE KIT FOR HERTELL PRIMER PUMP Learn More

RIV 3/4" EXPORT BALL VALVE M/F PN25 Learn More

This kit contains the following parts:

• 2 x AFI Reverse Blade - Doda Part Number 1502
• 4 x M10 Self Locking Nut - Doda Part Number BUL5151
• 8 x Washer M10 - Doda Part Number BUL5952
• 4 x Bolt M10x30 - Doda Part Number BUL5163

Learn More