Search results for 'Doda engine drive pumps'

This kit includes the following: 1 x GRU131 Crown Gear Z - 21 (Teeth) 1 x GRU133 Crown Gear Z - 42 (Teeth) 1 x GRU121 Crown Gear Z - 50 (Teeth) * LEAD TIME APPROX 2-3 WEEKS FROM ORDER Learn More

BATTIONI GEARBOX COVER 9000 -13500 M TO SUIT MEC 9000, 11000 & 13500 M SERIES PUMPS POS 19 4010601154BP Learn More

DODA AFI HD35 & L35 PUMP BODY HOUSING WIDIA BLUE HARDENED HIGH ABRASION RESISTANT HARD WEARING PUMP BODY FOR SAND PUMPING AND HIGH ABRASION APPLICATIONS Learn More

SPLINED HYDRAULIC HUB Z=12 CONICAL SHAFT FOR HD HYDRAULIC PUMP Learn More

REVERSE BLADE SUPPORT INCLUDES BRONZE BUSH *NUTS, BOLTS AND WASHERS NOT INCLUDED *FOR NON SPLINED SHAFT Learn More

HD35 1:3.31 SPLINED OUTPUT SHAFT Z=16 TEETH *NEW SPLINED SHAFT 1:3.31 Learn More

HD35 Gear Box Rear Cover Learn More

OUTPUT SHAFT Z=21 TEETH L35 1:2.38 IV 1:1.6 Learn More

VANE FOR DODA PRIMER 4 REQUIRED ON EACH PRIMER Approximate dimensions: L - 72mm W - 43mm H - 5mm Learn More

TOP HAT BAUER (PRIMING CAP) CLAMP INCLUDED *TOP HAT CLAMP MAY VARY Learn More

L35 Doda Pedestal Pump without primer Learn More

BATTIONI MEC LOCK NUT M27X2 TO SUIT MEC 6500 & 8000M SERIES PUMPS POS 18 AME32BP 5050300002BP Learn More

BELT A37-1/2 FOR VACUUM PRIMER FOR IV PUMP PULLY BELT Learn More

AFI GEARBOX SUPPORT L27/L35 3034 Learn More

JUROP PN155 PUMP DIRECT DRIVE SPLINED SHAFT *VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED *NO GEARBOX *PLEASE CONTACT US TO ENQUIRE AVAILABILITY ON THIS PUMP LEAD TIME WILL THEN BE GIVEN Learn More

AFI IMPELLER RING NUT TORQUING TOOL (BUL7002) Learn More

This item contains the following part :

• 1 x L27 Convoyer Housing - Doda Part Number 2976

 

 

Learn More

Bronze Bush Learn More

Key 10 x 8 x 45 Learn More

Rubber Gasket Afi Outlet 190 x 120 Learn More

BRONZE BUSH AFI HD35 2020 *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

HD35/L35 WELD ON FLANGE OUTLET Learn More

BOLT M1/2" X 10 (E4241) *BOLT ONLY Learn More

AFI HD35 GEARBOX SHIMS DIA. 85 X 100 (0.3/0.4/0.5) Learn More

L35 OUTPUT SHAFT 1:3.88 RATIO 17 TEETH Learn More

Dowell Learn More

Unidirectional Oil Flow Valve * LEAD TIME = 3-4 WEEKS ON THIS PRODUCT Learn More

HD35 Doda Pump R.1:3,31 without primer c/w Splined Shaft & Chopper System • Max Output pressure – 17bar • Max Flow Rate – 396m3/hour • PTO input speed – 1000RPM • Auto priming • Oil Cooling System • 200HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

JUROP PN140 VACUUM PUMP C/W HYDRAULIC DRIVE 14000 LTR * VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED Learn More

BATTIONI MANIFOLD COVER 401060156BP POS 49 SUITS: MEC 9000, 11000, 13500 M SERIES PUMPS Learn More

ADAPTER FEMALE 3/4" TO MALE 1/2" Learn More

INPUT PINION SHAFT *3242 ONLY *NON - SPLINED. PLEASE CHECK CURRENT SHAFT BEFORE ORDERING Learn More

SHIM 65 X 85 0.1 Learn More

This item contains the following part :

• 1 x AFI HD35 & L35 Impeller - Doda Part Number 3003

Learn More

Bolt M1/2" Learn More

COMPLETE GEARBOX ONLY L27 R.1:3,35 (E2011) *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn More

BOLT M1/8" ART.290 (E4241) Learn More

4" Rubber O-Ring Learn More

HD35 2020 PINION SPLINED SHAFT 1000RPM 1:2.73 Z=19 TEETH Learn More

HYDRAULIC 90° CONNECTION M1/8" RAC211 Learn More

HD INPUT SHAFT KEY 16 X 10 X 60 *KEY ONLY Learn More

VACUUM PRIMER OIL RESERVOIR Learn More

This kit contains the following parts :

• 1 x Oil Plug 3/8" - Doda Part Number GRU127
• 1 x Oil Plug Gasket Seal - Doda Part Number GTP246

Learn More

O Ring AFI L27 Learn More

Key 6 x 6 x 25 Learn More

Brass Hose Barb 3/4" x 25mm Learn More

This kit includes the following: 1 x O Ring PD version - GTP131 1 x Oil Seal Holder PD Impeller Side - 3026 2 x Oil Seal 45.60.10 - GTP130 1 x BEARING SKF 31309 J2/QCL7C (30309DJ) - CUS114 1 x Bearing 6209 - CUS115 1 x Shim 65 x 85 - BUL7557 Learn More

OIL PUMP DRIVE PN22-33 - 45-58-84 -106 -130-140-155D PN23-33 - 45-58-84-106-130-140-155 M 1622002600 Learn More

BATTIONI RUBBER BALL 90MM POS 33 SUITS: MEC 9000, 11000, 13500 M SERIES PUMPS Learn More

BRACKET FOR DODA FRAME FOR FITTING L27/L35 PUMP MODELS Learn More

VACUUM PRIMER BODY COVER PULLEY SIDE *BOLTS AND WASHERS NOT INCLUDED Learn More

VACUUM PRIMER RESERVOIR GALVANISED Learn More

This item contains the following part:

• 1 x AFI HD35 & L35 Convoyer Housing - Doda Part Number 3001

Learn More

HD35 CROWN GEAR 824RPM R.1:3.31 Z=53 TEETH Learn More

AFI L27-L35 Gearbox Housing Learn More

Doda L27/35 PTO Shaft - T 'Shear Bolt Protected' 1 3/8" 6 Spline x 1 3/8" 6 Spline Learn More

L27 Doda Pump 1000RPM R.1:3,35 without primer • Max Output pressure – 14.5bar • Max Flow Rate – 200m3/hour • PTO input speed – 1000RPM • Auto priming • 125HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 3-4 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

BALL BEARING DEEP GROOVE 6208 2 USED ON PUMP TO SUIT MEC 5000 - 13500 M SERIES PUMPS 5012107004 POS 9 - 5000, 6500 & 8000 M SERIES PUMPS POS 26 - 9000, 11000 & 13500 M SERIES PUMPS Learn More

AFI IV GEARBOX COVER - 3 INLET SIDE Learn More

HD OUTPUT SHAFT COVER *bolts etc not included Learn More

PEDESTAL HOUSING *HOUSING ONLY Learn More

RUBBER FLAPPER (E2031) * RUBBER FLAPPER ONLY, WASHER AND BOLT NOT INCLUDED Learn More

This kit contains the following parts :

• 1 x Oil Seal 50.72.10- Doda Part Number GTP139
• 1 x Taper Roller Bearing 31310 - Doda Part Number CUS118
• 1 x Shim 95x110MM - Doda Part Number BUL7593
• 1 x Bearing 3307- Doda Part Number CUS175
• 1 x Shim 65x77 T.04MM - Doda Part Number GRU241
• 1 x Shim 65x77 T.03MM - Doda Part Number GRU242

Learn More

AFI HD35 Cone Seal 3MM Learn More

Vacuum Primer Body Cover - Bearing Side Learn More

This kit includes the following: 1 x GRU130 Crown Gear Z - 29 (TEETH) 1 x GRU132 Crown Gear Z - 43 (TEETH) 1 x GRU121 Crown Gear Z - 50 (TEETH) Learn More

DRIVE GEAR Z48 PN45-58-84-106M 1651000000 Learn More

SELF LOCKING IMPELLER NUT HD35 2020 *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

PULLEY 132 1/A FOR: - 24/5 IV PUMP - L35 IV PUMP *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn More

AFI HD35 GLV CONE COVER *SEAL NOT INCLUDED Learn More

PEDESTAL PUMP SHAFT *KEYS NOT INCLUDED. Learn More

This kit contains the following parts:

• 1 x Oil Seal - Doda Part Number GTP217
• 1 x Bearing - Doda Part Number CUS201
• 1 x AFI GEARBOX SHIMS DIA. 85 X 100 (0.3/0.4/0.5) BUL7574
• 1 x Bearing - Doda Part Number CUS163

Learn More

HD Output Shaft Key Learn More

L27 OUTPUT SHAFT 1:3.35 Z=19 Learn More

Galvanised 90 Degree Elbow M/F 3/4" Learn More

HD35 OUTPUT SHAFT RATION - 1:3.05 17 TEETH *DELIVERY TIME IS 3-4 WEEKS FOR THIS PART Learn More

HD35 Doda IV Pump R.1:1,19 c/w oil cooler, without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 180HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 5-6 WEEKS Learn More

BALL BEARING DEEP GROVE 6307 TO SUIT MEC 5000 - 13500 M SERIES PUMPS 5012107010 POS 10 - 9000, 11000 & 13500 M SERIES PUMPS POS 11 - 5000, 6500 & 8000 M SERIES PUMPS Learn More

HD35 1:2.73 2020 SPLINED PARTS KIT THIS KIT CONTAINS: 1 X PINION SPLINED SHAFT 1000RPM 1:2.73 Z=19 TEETH - GRU195Z 1 X SELF LOCKING IMPELLER NUT - BUL7000 1 X AFI BLADE SPLINED AND BALANCED - 0608016 1 X REVERSE BLADE SUPPORT C/W BRONZE BUSH - 0608019 2 x AFI REVERSE BLADE - 1502 Learn More

AFI SUCTION CONE VALVE ASSEMBLY CAT FLAP *GTP135 - NOT INCLUDED Learn More

JUROP PN106 PUMP DIRECT DRIVE SPLINED SHAFT 1300RPM 11000L *VACUUM RELIEF OR PRESSURE RELIEF VALVES NOT INCLUDED *NO GEARBOX *PLEASE CONTACT US TO ENQUIRE AVAILABILITY ON THIS PUMP LEAD TIME WILL THEN BE GIVEN Learn More

DODA PUMP FRAME COMPLETE WITH LEGS AND PINS BRACKET REQUIRED FOR FITTING L27/L35 PUMP MODELS Learn More

This item contains the following part :

• 1 x AFI L27 Reverse Impeller - Doda Part Number 2977

 

Learn More

O Ring AFI L35/HD35 Learn More