Search results for 'Looking for pump for 2000gallon v tank'
-
AFI L27 Pump Body Housing Widia
AFI L27 Pump Body Housing Widia Learn MorePrice: £639.45 excl VAT -
HARD WEARING AFI HD35 & L35 PUMP BODY HOUSING WIDIA
NEW HIGH THICKNESS, HARD WEARING AFI HD35 & L35 PUMP BODY HOUSING WIDIA Learn MorePrice: £891.95 excl VAT -
BRACKET FOR DODA FRAME FOR FITTING L27/L35 PUMP MODELS
BRACKET FOR DODA FRAME FOR FITTING L27/L35 PUMP MODELS Learn MorePrice: £49.43 excl VAT -
HD35 Doda Pump R.1:3.31
HD35 Doda Pump R.1:3,31 without primer c/w Splined Shaft & Chopper System • Max Output pressure – 17bar • Max Flow Rate – 396m3/hour • PTO input speed – 1000RPM • Auto priming • Oil Cooling System • 200HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: REFER TO MANUFACTURERS MANUAL BEFORE USE Learn MorePrice: £8,114.50 excl VAT -
BELT A37-1/2 FOR VACUUM PRIMER FOR IV PUMP
BELT A37-1/2 FOR VACUUM PRIMER FOR IV PUMP PULLY BELT Learn MorePrice: £17.54 excl VAT -
Afi L35 Pump Body c/w Garda Evo 13500L
Afi L35 Pump Body c/w Garda Evo13500L Complete with Widia Seal and Blade No Suction Cone GARDA EVO Learn MorePrice: £6,906.00 excl VAT -
PULLEY PD/IV PRIMER 132 1/A
PULLEY 132 1/A FOR: - 24/5 IV PUMP - L35 IV PUMP *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn MorePrice: £114.57 excl VAT -
HARDENED AFI HD35 & L35 PUMP BODY HOUSING WIDIA
DODA AFI HD35 & L35 PUMP BODY HOUSING WIDIA BLUE HARDENED HIGH ABRASION RESISTANT HARD WEARING PUMP BODY FOR SAND PUMPING AND HIGH ABRASION APPLICATIONS Learn MorePrice: £1,205.82 excl VAT -
DODA PUMP FRAME
DODA PUMP FRAME COMPLETE WITH LEGS AND PINS BRACKET REQUIRED FOR FITTING L27/L35 PUMP MODELS Learn MorePrice: £721.88 excl VAT -
L27 Doda Pump 1000RPM R.1:3.35
L27 Doda Pump 1000RPM R.1:3,35 without primer • Max Output pressure – 14.5bar • Max Flow Rate – 200m3/hour • PTO input speed – 1000RPM • Auto priming • 125HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 3-4 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn MorePrice: £4,767.10 excl VAT -
HD35 Doda IV Pump R.1:1.19
HD35 Doda IV Pump R.1:1,19 c/w oil cooler, without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 180HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 5-6 WEEKS Learn MorePrice: £8,219.00 excl VAT -
HYDRAULIC HOSE KIT FOR HERTELL PRIMER PUMP
HYDRAULIC HOSE KIT FOR HERTELL PRIMER PUMP Learn MorePrice: £77.89 excl VAT -
HD35 COMPLETE GEARBOX R.1.2.73 SPLINED SHAFT
HD35 COMPLETE GEARBOX R.1.2.73 C/W SPLINED SHAFT C/W WITH OIL PUMP IDR220SX ONLY *3-4 week delivery leadtime Learn MorePrice: £4,854.15 excl VAT -
L35 Doda Pump 1000RPM R.1:2.38
L35 Doda Pump 1000RPM R.1:2,38 without primer • Max Output pressure – 12bar • Max Flow Rate – 255m3/hour • PTO input speed – 1000RPM • Auto priming • 130HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 2-3 WEEKS Learn MorePrice: £4,569.91 excl VAT -
HERTELL HEAVY DUTY B400 HYDRUALIC PRIMER
Hertell Heavy duty high capacity primer pump. - Hydraulic motor - Oil feed droppers - 1" hose connectors * Note - Hydraulic motor hoses and oil bottles not included Learn MorePrice: £981.33 excl VAT -
AFI REVERSE BLADE
AFI REVERSE BLADE 1 X BLADE *2 REQUIRED PER PUMP (FIXINGS NOT INCLUDED) Learn MorePrice: £86.94 excl VAT -
HD35 Doda Pump 1:2.73-Z c/w New 2020 Splined Shaft & Chopper System
HD35 Doda Pump 1:2.73-Z c/w New 2020 Splined Shaft & Chopper System WITHOUT PRIMER • Max Output pressure – 17bar • Max Flow Rate – 350m3/hour • PTO input speed – 1000RPM • Auto priming • Oil Cooling System • 155HP+ required to operate this pump • 2020 New Chopping system and splined shaft *All values are only a guide and may vary differently in each situation *NOTE: REFER TO MANUFACTURERS MANUAL BEFORE USE Learn MorePrice: £7,336.00 excl VAT -
HD35 Complete Gearbox only R.1:3.31
HD35 Complete Gearbox only R.1:3,31 Complete with oil pump IDR220SX only *3-4 week delivery leadtime Learn MorePrice: £3,950.10 excl VAT -
SPLINED HYDRAULIC HUB Z=12 CONICAL SHAFT FOR HD HYD PUMP
SPLINED HYDRAULIC HUB Z=12 CONICAL SHAFT FOR HD HYDRAULIC PUMP Learn MorePrice: £43.93 excl VAT -
VALVE DODA PUMP
VALVE DODA PUMP Learn MorePrice: £72.90 excl VAT -
HD35 Doda IV Pump R.1:1.6
HD35 Doda IV Pump R.1:1,6 without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 230HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn MorePrice: £8,219.00 excl VAT -
Oil Pump Kit
This kit includes: 1 x Oil Pump for HD pumps - IDR220SX 2 x Female 3/8" flange - IDR269 Learn MorePrice: £624.89 excl VAT -
PEDESTAL PUMP SHAFT
PEDESTAL PUMP SHAFT *KEYS NOT INCLUDED. Learn MorePrice: £793.33 excl VAT -
Stator AFI Vacuum Pump - Cast Iron
Stator AFI Vacuum Pump - Cast Iron Learn MorePrice: £359.81 excl VAT -
L35 Doda Pedestal Pump
L35 Doda Pedestal Pump without primer Learn MorePrice: £4,502.05 excl VAT -
HYDRAULIC PUMP RIGHT CC4.2 FOR IV TYPE COOLING SYSTEM
HYDRAULIC PUMP RIGHT CC4.2 FOR IV TYPE COOLING SYSTEM POLARIS HYDRAULIC PUMP FOR OIL COOLING - HD35 IV ONLY Learn MorePrice: £389.81 excl VAT -
AFI L27 Reverse Impeller
This item contains the following part :
- 1 x AFI L27 Reverse Impeller - Doda Part Number 2977
Learn MorePrice: £235.11 excl VAT -
CLEAR PVC TUBING - 30M COIL - PSC1110250
CLEAR FLEXIBLE PVC TUBING 30M COIL PSC1110250 OIL DROPPER HOSE Learn MorePrice: £93.98 excl VAT -
Vacuum Primer Body Cover - Bearing Side
Vacuum Primer Body Cover - Bearing Side Learn MorePrice: £119.93 excl VAT -
HD35 GEARBOX HOUSING (E4241)
HD35 GEARBOX HOUSING (E4241) *3-4 week delivery leadtime Learn MorePrice: £1,612.01 excl VAT -
INPUT PINION SHAFT AFI IV GEAR BOX FOR SPLINED SHAFT Z12
INPUT PINION SHAFT AFI IV GEAR BOX FOR SPLINED SHAFT Z12 *3242B ONLY *SPLINED. PLEASE CHECK CURRENT SHAFT BEFORE ORDERING *LEAD TIME FOR THIS PART IS 3-4 WEEKS Learn MorePrice: £340.52 excl VAT -
HD35 & L35 Reverse Impeller
This item contains the following part :
- 1 x AFI HD35 & Reverse Impeller - Doda Part Number 3002
Price: £236.58 excl VAT -
TOP HAT BAUER
TOP HAT BAUER (PRIMING CAP) CLAMP INCLUDED *TOP HAT CLAMP MAY VARY Learn MorePrice: £255.23 excl VAT -
VACUUM PRIMER OIL RESERVOIR
VACUUM PRIMER OIL RESERVOIR Learn More -
L35 1:2.38 & IV 1:1.6 OUTPUT SHAFT Z=21 TEETH
OUTPUT SHAFT Z=21 TEETH L35 1:2.38 IV 1:1.6 Learn MorePrice: £994.98 excl VAT -
Pedestal Bearing Kit
This kit includes the following: 1 x O Ring PD version - GTP131 1 x Oil Seal Holder PD Impeller Side - 3026 2 x Oil Seal 45.60.10 - GTP130 1 x BEARING SKF 31309 J2/QCL7C (30309DJ) - CUS114 1 x Bearing 6209 - CUS115 1 x Shim 65 x 85 - BUL7557 Learn MorePrice: £264.11 excl VAT -
HD OUTPUT SHAFT COVER
HD OUTPUT SHAFT COVER *bolts etc not included Learn MorePrice: £217.35 excl VAT -
Unidirectional Oil Flow Valve
Unidirectional Oil Flow Valve * LEAD TIME = 3-4 WEEKS ON THIS PRODUCT Learn MorePrice: £616.81 excl VAT -
AFI IV INLET CAP
AFI IV INLET CAP Learn MorePrice: £75.72 excl VAT -
INPUT PINION SHAFT
INPUT PINION SHAFT *3242 ONLY *NON - SPLINED. PLEASE CHECK CURRENT SHAFT BEFORE ORDERING Learn MorePrice: £217.35 excl VAT -
HD35 Gear Box Rear Cover
HD35 Gear Box Rear Cover Learn MorePrice: £702.77 excl VAT -
L35 IV Crown Gear Kit R.1:1.6
This kit includes the following: 1 x GRU130 Crown Gear Z - 29 (TEETH) 1 x GRU132 Crown Gear Z - 43 (TEETH) 1 x GRU121 Crown Gear Z - 50 (TEETH) Learn MorePrice: £1,781.19 excl VAT -
BRONZE BUSH AFI HD35 2020
BRONZE BUSH AFI HD35 2020 *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn MorePrice: £41.58 excl VAT -
AFI SUCTION CONE VALVE ASSEMBLY CAT FLAP
AFI SUCTION CONE VALVE ASSEMBLY CAT FLAP *GTP135 - NOT INCLUDED Learn MorePrice: £249.95 excl VAT -
VACUUM PRIMER RESERVOIR GALVANISED
VACUUM PRIMER RESERVOIR GALVANISED Learn MorePrice: £411.86 excl VAT -
VANE FOR DODA PRIMER
VANE FOR DODA PRIMER 4 REQUIRED ON EACH PRIMER Approximate dimensions: L - 72mm W - 43mm H - 5mm Learn MorePrice: £15.42 excl VAT -
AFI IV GEARBOX COVER - 3 INLET SIDE
AFI IV GEARBOX COVER - 3 INLET SIDE Learn MorePrice: £126.19 excl VAT -
VACUUM PRIMER BODY COVER PULLEY SIDE
VACUUM PRIMER BODY COVER PULLEY SIDE *BOLTS AND WASHERS NOT INCLUDED Learn MorePrice: £123.17 excl VAT -
AFI L27/35 GEARBOX COVER KIT
This kit contains the following parts :
- 1 x Cover for A7D Gearbox - Doda Part Number GRU176
- 8 x VSP Bolt M8x20 - Doda Part Number BUL5601
- 8 x M8 Washer - Doda Part Number BUL8201
- 1 x Plug Drain - Doda Part Number RAC100 GTP141 is no longer provided. Please use silicon gel instead
Price: £185.37 excl VAT -
Oil Filter Assembly for HD Pumps
Oil Filter Assembly for HD Pumps Learn MorePrice: £144.59 excl VAT -
HERTELL PRIMER VANE B400
HERTELL PRIMER VANE B400 4 REQUIRED ON EACH PRIMER Approximate dimensions: L - 100mm W - 42mm H - 7.5mm 01BO004015 Learn MorePrice: £9.37 excl VAT -
Brass Rotor For Vacuum Primer & Shaft
Brass Rotor For Vacuum Primer & Shaft Learn MorePrice: £335.35 excl VAT -
HD35 1:2.73 2020 SPLINED PARTS KIT
HD35 1:2.73 2020 SPLINED PARTS KIT THIS KIT CONTAINS: 1 X PINION SPLINED SHAFT 1000RPM 1:2.73 Z=19 TEETH - GRU195Z 1 X SELF LOCKING IMPELLER NUT - BUL7000 1 X AFI BLADE SPLINED AND BALANCED - 0608016 1 X REVERSE BLADE SUPPORT C/W BRONZE BUSH - 0608019 2 x AFI REVERSE BLADE - 1502 Learn MorePrice: £2,598.03 excl VAT -
REVERSE BLADE SUPPORT (INC BRONZE BUSH)
REVERSE BLADE SUPPORT INCLUDES BRONZE BUSH *NUTS, BOLTS AND WASHERS NOT INCLUDED *FOR NON SPLINED SHAFT Learn MorePrice: £225.75 excl VAT -
Price: £642.60 excl VAT -
HD35 OUTPUT SHAFT 1:3.05 Z=17 TEETH
HD35 OUTPUT SHAFT RATION - 1:3.05 17 TEETH *DELIVERY TIME IS 3-4 WEEKS FOR THIS PART Learn MorePrice: £2,332.89 excl VAT -
HARDENED AFI HD35 & L35 IMPELLER
BLUE HARDENED HIGH ABRASION RESISTANT DODA AFI HD35 & L35 IMPELLER HARD WEARING IMPELLER FOR SAND PUMPING AND HIGH ABRASION APPLICATIONS Learn MorePrice: £488.80 excl VAT -
Rear Cover AFI L27-L35 Gearbox
Rear Cover AFI L27-L35 Gearbox Learn MorePrice: £233.00 excl VAT -
SELF LOCKING IMPELLER NUT HD35 2020
SELF LOCKING IMPELLER NUT HD35 2020 *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn MorePrice: £13.23 excl VAT -
HD GEARBOX BOTTOM COVER (E4241)
HD GEARBOX BOTTOM COVER (E4241) *COVER ONLY Learn MorePrice: £86.94 excl VAT -
FILTERING ELEMENT FOR PSC366 COMPLETE FILTER
FILTERING ELEMENT FOR PSC366 COMPLETE FILTER Learn More -
AFI 35 Convoyer Housing
This item contains the following part:
- 1 x AFI HD35 & L35 Convoyer Housing - Doda Part Number 3001
Price: £496.84 excl VAT -
Spiraled Hose 25mm c/w Hose Clips
Spiraled Hose 25mm c/w Hose Clips Learn MorePrice: £18.76 excl VAT -
IV OUTPUT PINION SHAFT R.1:1.19 - Z=21 TEETH
IV OUTPUT PINION SHAFT R.1:1.19 - Z=21 TEETH *SHAFT GRU112M ONLY Learn MorePrice: £1,324.88 excl VAT -
Sealing Ring for Widia Holder
Sealing Ring for Widia Holder Learn MorePrice: £3.08 excl VAT -
L35 IV Bearing & Seal Kit
This suits both 1:1,19 and 1:1,6 gearbox ratios This kit includes: 1 x 31310 Taper Koyo Bearing - CUS118 3 x Bearing 33208/Q - CUS119 1 x Bearing 32307J2 - CUS120 1 x Bearing 33109/Q - CUS121 1 x Oil Seal 50.72.10 - GTP139 1 x Oil Seal 45.60.7- GTP140 Learn MorePrice: £483.42 excl VAT -
REVERSE BLADE SUPPORT HD35 2020 (INC BRONZE BUSH)
REVERSE BLADE SUPPORT HD35 2020 INCULDING BRONZE BUSH *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn MorePrice: £363.70 excl VAT -
HERTELL OIL DRIPPER
HERTELL OIL DRIPPER SAME FOR ALL B MODELS (B-400 TO B-2200) *NOT SUITABLE WITH DODA OIL RESERVOIR GLOBE (PVC111) 01BO822018 Learn MorePrice: £42.86 excl VAT -
Galvanised 90 Degree Elbow M/F 3/4"
Galvanised 90 Degree Elbow M/F 3/4" Learn MorePrice: £7.95 excl VAT -
TOP HAT BAUER E2029003 VERSION
TOP HAT BAUER E2029003 VERSION Learn MorePrice: £208.54 excl VAT -
LAY SHAFT AFI IV GEAR BOX
LAY SHAFT AFI IV GEAR BOX *3240 ONLY Learn MorePrice: £204.12 excl VAT -
L27-L35 Cone Kit
This kit contains the following parts :
- 1 x 4" Rubber O-Ring - Doda Part Number GTP213
- 1 x Bauer Cone for Afi Pumps; Doda Part Number 3182
- 1 x 6" Rubber O-Ring - Doda Part Number GTP214
Price: £445.33 excl VAT -
AFI BLADE SPLINED AND BALANCED HD35 2020
AFI BLADE SPLINED AND BALANCED *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn MorePrice: £280.53 excl VAT -
OIL VENT CAP 3/4"
OIL VENT CAP 3/4" Learn MorePrice: £32.03 excl VAT -
AFI HD35 GLV CONE COVER
AFI HD35 GLV CONE COVER *SEAL NOT INCLUDED Learn MorePrice: £370.13 excl VAT
Shop By
Currently Shopping by:
- Category: Doda Pumps Remove This Item
Shopping Options
- Category
-
- AFI HD35 Parts (35)
- AFI L35 Parts (28)
- AFI L27 Parts (25)
- AFI Pedestal Parts (6)
- Complete Pumps (11)
- AFI L35 IV Pump (18)
- Complete Gearboxes (2)
Secure Checkout
Card payments are processed securely via WorldPay. Most cards are accepted.
