Search results for 'Doda engine drive pump'

HD35 Doda Pump 1:2.73-Z c/w New 2020 Splined Shaft & Chopper System WITHOUT PRIMER • Max Output pressure – 17bar • Max Flow Rate – 350m3/hour • PTO input speed – 1000RPM • Auto priming • Oil Cooling System • 155HP+ required to operate this pump • 2020 New Chopping system and splined shaft *All values are only a guide and may vary differently in each situation *NOTE: REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

HD35 Complete Gearbox only R.1:3,31 Complete with oil pump IDR220SX only *3-4 week delivery leadtime Learn More

HYDRAULIC PUMP RIGHT CC4.2 FOR IV TYPE COOLING SYSTEM POLARIS HYDRAULIC PUMP FOR OIL COOLING - HD35 IV ONLY Learn More

VALVE DODA PUMP Learn More

SPLINED HYDRAULIC HUB Z=12 CONICAL SHAFT FOR HD HYDRAULIC PUMP Learn More

AFI L27 Pump Body Housing Widia Learn More

HD35 Doda IV Pump R.1:1,6 without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 230HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

BELT A37-1/2 FOR VACUUM PRIMER FOR IV PUMP PULLY BELT Learn More

NEW HIGH THICKNESS, HARD WEARING AFI HD35 & L35 PUMP BODY HOUSING WIDIA Learn More

PEDESTAL PUMP SHAFT *KEYS NOT INCLUDED. Learn More

L35 Doda Pedestal Pump without primer ##EMAIL FOR LEAD TIME ## Learn More

DODA PUMP FRAME COMPLETE WITH LEGS AND PINS BRACKET REQUIRED FOR FITTING L27/L35 PUMP MODELS Learn More

HD35 COMPLETE GEARBOX R.1.2.73 C/W SPLINED SHAFT C/W WITH OIL PUMP IDR220SX ONLY *3-4 week delivery leadtime Learn More

HD35 Doda Pump R.1:3,31 without primer c/w Splined Shaft & Chopper System • Max Output pressure – 17bar • Max Flow Rate – 396m3/hour • PTO input speed – 1000RPM • Auto priming • Oil Cooling System • 200HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 5-6 WEEKS *NOTE: REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

BRACKET FOR DODA FRAME FOR FITTING L27/L35 PUMP MODELS Learn More

AFI REVERSE BLADE 1 X BLADE *2 REQUIRED PER PUMP (FIXINGS NOT INCLUDED) Learn More

PULLEY 132 1/A FOR: - 24/5 IV PUMP - L35 IV PUMP *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn More

L27 Doda Pump 1000RPM R.1:3,35 without primer • Max Output pressure – 14.5bar • Max Flow Rate – 200m3/hour • PTO input speed – 1000RPM • Auto priming • 125HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *LEAD TIME ON THIS PUMP IS 3-4 WEEKS *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE Learn More

HD35 Doda IV Pump R.1:1,19 c/w oil cooler, without primer • Max Output pressure – 15bar • Max Flow Rate – 310m3/hour • input speed – 2000RPM+ • Oil Cooling System • 180HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 5-6 WEEKS Learn More

Stator AFI Vacuum Pump - Cast Iron Learn More

This kit includes: 1 x Oil Pump for HD pumps - IDR220SX 2 x Female 3/8" flange - IDR269 Learn More

L35 Doda Pump 1000RPM R.1:2,38 without primer • Max Output pressure – 12bar • Max Flow Rate – 255m3/hour • PTO input speed – 1000RPM • Auto priming • 130HP+ required to operate this pump *All values are only a guide and may vary differently in each situation *NOTE: PUMP SHIPPED WITHOUT GEARBOX OIL. REFER TO MANUFACTURERS MANUAL BEFORE USE *LEAD TIME ON THIS PUMP IS 2-3 WEEKS Learn More

Lasts on average 5 times longer than standard body housing
Doda AFI HD35 & L35 Pump Body Housing Widia Blue Hardened High Abrasion Resistant Hard Wearing Pump Body For Sand Pumping And High Abrasion Applications

Learn More

HYDRAULIC HOSE KIT FOR HERTELL PRIMER PUMP Learn More

Afi L35 Pump Body c/w Garda Evo13500L Complete with Widia Seal and Blade No Suction Cone GARDA EVO Learn More

This  item contains the following part :

• 1 x AFI HD35 & Reverse Impeller  - Doda Part Number 3002

Learn More

HD35 CROWN GEAR 1000RPM R.1:2.73 Z=52 TEETH Learn More

COMPLETE GEARBOX ONLY - L35 R.1:2.38 1000 RPM *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn More

Hydraulic Primer Motor Learn More

BRONZE BUSH AFI HD35 2020 *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

Lasts on average 5 times longer than standard impeller
Blue Hardened High Abrasion Resistant Doda AFI HD35 & L35 Impeller Hard Wearing Impeller For Sand Pumping And High Abrasion Applications

Learn More

HYDRAULIC PRIMER BRACKET *BRACKET ONLY Learn More

SHIM 65 X 85 0.1 Learn More

This kit contains the following parts :

• 1 x Shim 65 x 77 T.0.4 - Doda Part Number GRU241
• 1 x Shim 65x77 T.0.3 - Doda Part Number GRU242
• 1 x Shim 65x80- Doda Part Number BUL7576
• 1 x Bearing 6307- Doda Part Number CUS137
• 1 x CIR Clip - Doda Part Number BUL7313
• 1 x Oil Seal 35.80.10 - Doda Part Number GTP159
• 1 x Bearing 3208 - Doda Part Number CUS142
• 1 x Shim 45x65 - Doda Part Number BUL7567
Learn More

AFI HD35 Cone Liner 0606001 Learn More

Bearing 6205 Learn More

Doda HD35 PTO Shaft 'Shear Bolt Protected' 1 3/4" 20 Spline - 1 3/8" 6 Spline Learn More

VACUUM PRIMER OIL RESERVOIR Learn More

NEW 2024 MONOLITHIC AFI MECHANICAL SEAL SET WITHOUT HOLDER KIT CONTAINS: 1 X GTP125M 1 X GTP126 * MUST BE USED WITH COVER FOR AFI MONOLITHIC WIDIA SEAL 0608034 (HOLDER) Learn More

This kit contains the following parts:

• 2 x AFI Reverse Blade - Doda Part Number 1502
• 4 x M10 Self Locking Nut - Doda Part Number BUL5151
• 8 x Washer M10 - Doda Part Number BUL5952
• 4 x Bolt M10x30 - Doda Part Number BUL5163

Learn More

HD Gear Box Oil Plug Learn More

Rear Cover AFI L27-L35 Gearbox Learn More

Bearing 6003 Learn More

This suits both 1:1,19 and 1:1,6 gearbox ratios This kit includes: 1 x 31310 Taper Koyo Bearing - CUS118 3 x Bearing 33208/Q - CUS119 1 x Bearing 32307J2 - CUS120 1 x Bearing 33109/Q - CUS121 1 x Oil Seal 50.72.10 - GTP139 1 x Oil Seal 45.60.7- GTP140 Learn More

HD35 2020 PINION SPLINED SHAFT 1000RPM 1:2.73 Z=19 TEETH Learn More

REVERSE BLADE SUPPORT INCLUDES BRONZE BUSH *NUTS, BOLTS AND WASHERS NOT INCLUDED *FOR NON SPLINED SHAFT Learn More

VACUUM PRIMER RESERVOIR GALVANISED Learn More

This item contains the following part :

• 1 x AFI L27 Impeller - Doda Part Number 2978

 

Learn More

Sealing Ring for Widia Holder Learn More

CROWN GEAR - AFI L27 1000RPM 1:3,35 Z = 64 (TEETH) Learn More

AFI GEARBOX SUPPORT L27/L35 3034 Learn More

PEDESTAL HOUSING *HOUSING ONLY Learn More

INPUT PINION SHAFT AFI IV GEAR BOX FOR SPLINED SHAFT Z12 *3242B ONLY *SPLINED. PLEASE CHECK CURRENT SHAFT BEFORE ORDERING *LEAD TIME FOR THIS PART IS 3-4 WEEKS Learn More

This kit contains the following parts:

• 1 x Oil Seal - Doda Part Number GTP217
• 1 x Bearing - Doda Part Number CUS201
• 1 x AFI GEARBOX SHIMS DIA. 85 X 100 (0.3/0.4/0.5) BUL7574
• 1 x Bearing - Doda Part Number CUS163

Learn More

HD35 Gear Box Rear Cover Learn More

OUTPUT SHAFT Z=21 TEETH L35 1:2.38 IV 1:1.6 Learn More

VANE FOR DODA PRIMER 4 REQUIRED ON EACH PRIMER Approximate dimensions: L - 72mm W - 43mm H - 5mm Learn More

This kit includes the following: 1 x GRU131 Crown Gear Z - 21 (Teeth) 1 x GRU133 Crown Gear Z - 42 (Teeth) 1 x GRU121 Crown Gear Z - 50 (Teeth) * LEAD TIME APPROX 2-3 WEEKS FROM ORDER Learn More

HD35/L35 WELD ON FLANGE OUTLET Learn More

BOLT M1/2" X 10 (E4241) *BOLT ONLY Learn More

This item contains the following part :

• 1 x L27 Convoyer Housing - Doda Part Number 2976

 

 

Learn More

Bronze Bush Learn More

Key 10 x 8 x 45 Learn More

TOP HAT BAUER (PRIMING CAP) CLAMP INCLUDED *TOP HAT CLAMP MAY VARY Learn More

SELF LOCKING IMPELLER NUT HD35 2020 *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

ADAPTER FEMALE 3/4" TO MALE 1/2" Learn More

INPUT PINION SHAFT *3242 ONLY *NON - SPLINED. PLEASE CHECK CURRENT SHAFT BEFORE ORDERING Learn More

This kit contains the following parts :

• 1 x 4" Rubber O-Ring - Doda Part Number GTP213
• 1 x Bauer Cone for Afi Pumps; Doda Part Number 3182
• 1 x 6" Rubber O-Ring - Doda Part Number GTP214

*note - bauer cone not complete with clamps Learn More

L35 OUTPUT SHAFT 1:3.88 RATIO 17 TEETH Learn More

Dowell Learn More

Oil Filter Assembly for HD Pumps Learn More

Rubber Gasket Afi Outlet 190 x 120 Learn More

HYDRAULIC 90° CONNECTION M1/8" RAC211 Learn More

HD INPUT SHAFT KEY 16 X 10 X 60 *KEY ONLY Learn More

This item contains the following part :

• 1 x AFI HD35 & L35 Impeller - Doda Part Number 3003

Learn More

Bolt M1/2" Learn More

COMPLETE GEARBOX ONLY L27 R.1:3,35 (E2011) *** 2-3 WEEK LEAD TIME ON THIS PRODUCT *** Learn More

Unidirectional Oil Flow Valve * LEAD TIME = 3-4 WEEKS ON THIS PRODUCT Learn More

REVERSE BLADE SUPPORT HD35 2020 INCULDING BRONZE BUSH *ONLY FOR HD35 1:2.73-Z AND HD35 1:3.31 THAT IS COMPLETE WITH SPLINED SHAFT Learn More

VACUUM PRIMER BODY COVER PULLEY SIDE *BOLTS AND WASHERS NOT INCLUDED Learn More

HERTELL OIL DRIPPER SAME FOR ALL B MODELS (B-400 TO B-2200) *NOT SUITABLE WITH DODA OIL RESERVOIR GLOBE (PVC111) 01BO822018 Learn More

This kit contains the following parts :

• 1 x Oil Plug 3/8" - Doda Part Number GRU127
• 1 x Oil Plug Gasket Seal - Doda Part Number GTP246

Learn More

O Ring AFI L27 Learn More

Key 6 x 6 x 25 Learn More